journal article·2001-12

Preparation of carbon fiber from heavy oil residue through bromination

Young Ok Choi, Kap Seung Yang

Fibers and Polymers· Volume 2· Issue 4
Publisher page

Abstract

A pitch precursor for a general purpose carbon fiber was prepared by condensation of pyrolized fuel oil (petroleum residual oil) with bromine under nitrogen blowing. Such a condensation raised the softening point of the pitch from 40°C to 265°C with a yield of 43%. The pitch precursor showed an enhanced aromaticity and enlarged molecular size, which led to a reduction in molecular mobility and optical isotropy. The precursor was spun into fibers of 20 µm diameter at a take-up speed of 700 m/min. The fiber was stepwise stabilized in air and carbonized in Ar gas to obtain an isotropic carbon fiber. The carbon fiber exhibited tensile strengths of 500–800 MPa though the fiber was formed via a crude method. The electric conductivity of the carbon fiber was relatively high, 2.2×102 S/cm, sufficient to be used as electrode materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Supercapacitor Materials and Fabrication · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. L. H. Peebles, “Carbon Fibers: Formation, Structure, Properties and Applications”, pp.3–40, CRC Press Inc., New York, 1998.
2. D. Jean-Baptiste and B. R. Chand in “Carbon fibers”, 2nd ed., pp.1–74, Marcel Dekker, New York, 1990.
3. S. Otani, K. Okuda, and H. S. Matsuda, “Carbon Fiber”, p.231, Kindai Henshu, Tokyo, 1983.
4. T. Mdada, S. M. Zeng, K. Tokumitsue, J. Mondori, and I. Mochida,Carbon,31(3), 407 (1993).10.1016/0008-6223(93)90127-V ↗
5. T. Mdada, S. M. Zeng, K. Tokumitsue, J. Mondori, and I. Mochida,Carbon,31(3), 413 (1993).10.1016/0008-6223(93)90128-W ↗
6. T. Mdada, S. M. Zeng, K. Tokumitsue, J. Mondori, and I. Mochida,Carbon,31(3), 420 (1993).
7. M. L. Deviney and T. M. O’Grady, “Petroleum Derived Carbons”, pp.18–60, American Chemical Society, Washington, 1996.
8. H. Marsh, E. A. Heintz, and F. Rodriguez-Reinoso, “Introduction to Carbon Technologies”, pp.425–441, University of Alicante, Alicante, 1997.
9. I. Mochida, E. I. Nakamura, K. Maeda, and K. Takeshida,Carbon,13, 489 (1975).10.1016/0008-6223(75)90050-0 ↗
10. I. Mochida and Y. Korai,J. Fuel Soc.(Japan),64, 796 (1985).10.3775/jie.64.10_796 ↗
11. I. Mochida, K. Shimiju, Y. Korai, S. Fujiyama, H. Otsuka, and Y. Sakai,Carbon,28, 311 (1990).10.1016/0008-6223(90)90005-J ↗
12. Y. Korai, M. Nakamura, I. Mochida, Y. Sakai, and S. Fujiyama,Carbon,29, 561 (1991).10.1016/0008-6223(91)90121-X ↗
13. K. S. Yang, Y. A. Kim, K. S. Shin, and K. H. An,Polymer (Korea),21(4), 532 (1997).
14. K. S. Yang, Y. O. Choi, Y. M. Kim, S. H. Park, C. M. Yang, Y. J. Kim, and S. Y. Soh,Fibers and Polymers,1(2), 97 (2000).10.1007/BF02875192 ↗
15. K. S. Yang, C. M. Yang, and Y. J. Kim, “Extended Abstract of the Korean Fiber Society”, pp.395–397, Chonbuk Univ., 1997.
16. K. S. Yang, D. J. Lee, K. H. An, J. H. Choi, H. Kumagai, and Y. Sanada,J. Mater. Sci.,35, 2087 (2000).10.1023/A:1004759612122 ↗
17. K. S. Yang, D. J. Lee, S. K. Ryu, Y. Korai, Y. J. Kim, and I. Mochida,Korean J. Chem. Eng.,16(4), 518 (1999).10.1007/BF02698278 ↗
18. Hanwha Chemical Corporation,Korea Patent, 98-47218 (1998).
19. J. K. Brown and W. R. Ladner,Fuel,39, 87 (1963).
20. J. Mondori, C. Yamaguchi, and I. Mochida,TANSO,194, 248 (2000).10.7209/tanso.2000.248 ↗
21. D. Jean-Baptiste, W. Tong Kuan, and C. M. P. Jimmy, “Carbon Fibers”, 3rd ed., pp.57–59, Marcel Dekker, New York, 1998.
22. D. Jean-Baptiste and B. R. Chand, “Carbon Fibers”, 2nd ed., pp.1–11, Marcel Dekker, New York, 1990.
23. Y. O. Choi, K. S. Yang, and J. H. Kim, “Extended abstracts of EUROCARBON 2000”, pp.387–388, European Carbon Association, Berlin, 2000.