journal article·2026-04-10

Novel bipolar output high step-up sepic DC/DC converter with parasitical parameters self-balance

Jian Ai, Zhichao Wu, Kaitao Bi, Qigao Fan, Wenxu Yan, Yue Qiu, Sichu Dai, Lei Qian, Jingcheng Ai, Canmin Wang, Yuelong Han

Microelectronics International· Volume 43· Issue 2
Publisher page

Abstract

Purpose The purpose of this study is to propose a converter that can maintain voltage balance between the bipolar outputs against the effects of parasitical parameters of all components, except for those of the clamped diode. Design/methodology/approach The single-switch bipolar output Sepic DC/DC converter based on coupled inductor is analyzed. Its theoretical analysis and principal operation are discussed in detail. Finally, an experimental prototype is established to verify its performance. Findings The effect of the drive signal of the power switch on the voltages of bipolar outputs is completely eliminated by the proposed converter. The use of a two-winding coupled inductor shared by two step-up cells in the proposed converter not only effectively reduces the size but also eliminates the issue of coupling inductor winding difficulties caused by the need to match the parasitic parameters of different windings, which leads to bipolar output voltage imbalance. Therefore, there is an almost perfect voltage balance in bipolar outputs of the proposed converter. Originality/value The proposed converter offers several advantages, including continuous input current, a full range duty cycle, a coupled inductor composed of two windings, high voltage gain and zero-current switching for both switch and diodes. Besides, there is low voltage stress on the components and low output voltage ripple in this converter, attributed to its bipolar output.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced DC-DC Converters · Wireless Power Transfer Systems · Innovative Energy Harvesting Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Jiangnan University School of IoT Engineering, , Wuxi,

Nanjing Normal University School of Electrical and Automation Engineering, , Nanjing,

Wuxi Guangying Group Co., Ltd , Wuxi,

China Mobile Tietong Co., Ltd , Jiangxi Branch, Nanchang,

State Grid Jiangsu Electric Power Co Ltd , Nanjing,

Training Center of State Grid Zhejiang Electric Power Co., Ltd , Hangzhou,

Funding

Natural Science Foundation of Jiangsu Province · National Nature Science Foundation of China

References (26)

Show source-provided references
1. Ultralarge gain step-up coupled- inductor DC–DC converter with an asymmetric voltage multiplier network for a sustainable energy system10.1109/TPEL.2016.2626383 ↗
2. A family of high Step-Up Cascade DC–DC converters with clamped circuits10.1109/TPEL.2019.2943502 ↗
3. Highly efficient singlephase transformerless inverters for grid-connected photovoltaic systems10.1109/TIE.2009.2037654 ↗
4. High Step-Up DC–AC inverter suitable for AC module applications10.1109/TIE.2015.2480387 ↗
5. Switched- capacitor/switched-inductor structures for getting transformerless hybrid DC–DC PWM converters
6. High Step-Up Switched-Capacitor active Switched-Inductor converter with Self-Voltage balancing and low stress10.1109/TIE.2021.3135611 ↗
7. New Coupled-Inductor High-Gain DC/DC converter with bipolar outputs10.1109/TIE.2023.3270512 ↗
8. A new high voltage gain active Switched-Inductor based high Step-Up DC-DC converter with Coupled-Inductor10.1109/ACCESS.2023.3283471 ↗
9. An Enhanced-Boost Coupled-Inductor impedance network inverter without limitation of inductor parameters10.1109/TTE.2021.3103045 ↗
10. High step-up Y-source coupled-inductor impedance network boost DC-DC converters with common ground and continuous input current10.1109/JESTPE.2019.2892499 ↗
11. Novel high step-up dual switches converter with reduced power device voltage stress for distributed generation system10.1049/iet-pel.2017.0092 ↗
12. General Multi-Frequency Small-Signal model for resonant converters10.1109/TPEL.2021.3120617 ↗
13. A family of improved magnetically coupled impedance network boost DC–DC converters10.1109/TPEL.2017.2763153 ↗
14. A novel high Step-Up dual switches converter with coupled inductor and voltage multiplier cell for a renewable energy system
15. A novel high step-up coupled-inductor DC-DC converter with reduced power device voltage stress10.1109/JESTPE.2018.2868769 ↗
16. High Step-Up interleaved DC-DC converter with asymmetric voltage multiplier cell and coupled inductor10.1109/JESTPE.2019.2931634 ↗
17. A new DC–DC converter for photovoltaic systems: coupled-Inductors combined Cuk-SEPIC converter10.1109/TEC.2018.2876454 ↗
18. A 4:1 switched capacitor converter with low flying capacitors voltage and high efficiency10.1109/TIE.2022.3224173 ↗
19. Multi-Port DC-AC converter with differential power processing DC-DC converter and flexible power control for battery ESS integrated PV systems10.1109/TIE.2021.3080198 ↗
20. Novel High-Frequency pulse permutation scheme for DC-Link voltage balance of CHB-Based PV Solid-State transformer10.1109/TPEL.2024.3420962 ↗
21. Analysis of the existence of stable equilibrium points in the WPP-MMC system under symmetrical AC fault10.1109/TSTE.2024.3433611 ↗
22. A wide Input-Voltage range Quasi-Z-Source boost DC–DC converter with High-Voltage gain for fuel cell vehicles10.1109/TIE.2017.2745449 ↗
23. A family of bipolar high Step-Up Zeta-Buck-Boost converter based on ‘coat circuit10.1109/TPEL.2022.3221781 ↗
24. High step-up DC–DC converter with low power device voltage stress for a distributed generation system10.1049/iet-pel.2017.0526 ↗
25. A high step up SEPIC-Based converter based on partly interleaved transformer10.1109/TIE.2019.2910044 ↗
26. Extended switched-boost DC-DC converters adopting switched-capacitor/switched-inductor cells for high step-up conversion10.1109/JESTPE.2016.2641928 ↗