journal article·2020-07

Long Carbon Fibers Reinforced Rigid Polyurethane Composites: An Investigation In Strength and Toughness

Weiwei Li, Jie Yang, Xiaojing Liu

Fibers and Polymers· Volume 21· Issue 7
Publisher page

Abstract

High-performance polyurethane materials are attracting more and more attention. In this work, a cooperative improvement of strength and toughness of rigid polyurethane (RPU) composites was achieved. 1.0 wt% long carbon fibers (LCFs) reinforced RPU composites were prepared and the effects of fiber oxidation treatment were studied. The results indicated that the surface roughness and wettability of LCFs were both increased, which could provide better physical bonding between LCFs and RPU matrix. Moreover, the increasing -OH groups on the fiber surface would react with RPU to form chemical bond. With the strengthened physical and chemical bonds, the interface of LCFs/RPU composites has been effectively improved. The mechanical properties showed that compared with pure RPU, the tensile strength, tensile modulus, bending strength, bending modulus, and impact strength of oxidized LCFs/RPU composites were increased by 171.1 %, 814.3 %, 29.1 %, 125.8 % and 110.1 %, respectively. Interlaminar shear strength (ILSS) was also increased by 65.1 %. Dynamic thermomechanical analysis (DMA) and scanning electron microscope (SEM) indicated the positive effects of the oxidation treatment on the interfacial bonding between LCFs and RPU matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Polymer composites and self-healing · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. C. Kim and J. R. Youn, Polym-Plast. Technol., 39, 163 (2000).10.1081/PPT-100100022 ↗
2. Z. G. Yang, B. Zhao, S. L. Qin, Z. F. Hu, Z. K. Jin, and J. H. Wang, J. Appl. Polym. Sci., 92, 1493 (2004).10.1002/app.20071 ↗
3. N. N. P. N. Pauzi, R. A. Majid, M. H. Dzulkifli, and M. Y. Yahy, Compos. Part B-Eng., 67, 521 (2014).10.1016/j.compositesb.2014.08.004 ↗
4. W. Xu, G. J. Wang, and X. R. Zheng, Polym. Degrad. Stabil., 111, 142 (2015).10.1016/j.polymdegradstab.2014.11.008 ↗
5. N. C. Hilyard and A. Cunningham, “Low Density Cellular Plastics Physical Basis of Behavior”, p.135, New York: Chapman and Hall, 1994.10.1007/978-94-011-1256-7 ↗
6. S. Jiang, Q. F. Li, Y. H. Zhao, J. W. Wang, and M. Q. Kang, Compos. Sci. Technol., 110, 87 (2015).10.1016/j.compscitech.2015.01.022 ↗
7. Y. Lee and R. S. Porter, Polym. Eng. Sci., 26, 633 (1986).10.1002/pen.760260909 ↗
8. Y. Liu and S. Kumar, Polym. Rev., 52, 234 (2012).10.1080/15583724.2012.705410 ↗
9. N. G. Karsli and A. Aytac, Compos. Part B: Eng., 51, 270 (2013).10.1016/j.compositesb.2013.03.023 ↗
10. Y. Zhang, Y. Z. Zhang, Y. Liu, X. L. Wang, and B. Yang, Appl. Surf. Sci., 382, 144 (2016).10.1016/j.apsusc.2016.04.118 ↗
11. S. Jiang, Q. F. Li, Y. H. Zhao, J. W. Wang, and M. Q. Kang, Compos. Sci. Technol., 110, 87 (2015).10.1016/j.compscitech.2015.01.022 ↗
12. H. J. Zo, S. H. Joo, T. Kim, P. S. Seo, J. H. Kim, and J. S. Park, Fiber. Polym, 15, 1071 (2014).10.1007/s12221-014-1071-5 ↗
13. R. L. Ma, W. W. Li, M. M. Huang, X. J. Liu, and M. Feng, Polym. Test, 71, 156 (2018).10.1016/j.polymertesting.2018.08.030 ↗
14. M. Zhao, L. Meng, L. Ma, G. Wu, Y. Wang, F. Xie, and Y. Huang, RSC Adv., 6, 29654 (2016).10.1039/C6RA00570E ↗
15. N. Zheng, Y. Huang, H. Y. Liu, J. Gao, and Y. W. Mai, Compos. Sci. Technol., 140, 8 (2017).10.1016/j.compscitech.2016.12.017 ↗
16. L. Zhang, H. Jiao, H. Jiu, J. Chang, S. Zhang, and Y. Zhao, Compos. Part A-Appl. S., 90, 286 (2016).10.1016/j.compositesa.2016.07.017 ↗
17. M. N. Salimi, M. T. Merajin, and M. K. B. Givi, J. Compos. Mater., 51, 745 (2017).10.1177/0021998316655201 ↗
18. Y. J. Yan, H. Xia, Y. P. Qiu, Z. Z. Xu, and Q. Q. Ni, RSC Adv., 9, 9401 (2019).10.1039/C9RA00028C ↗
19. S. Shrestha, B. K. Shrestha J. I. Kim, S. W. Ko, C. H. Park, and C. S. Kim, Carbon, 136, 430 (2018).10.1016/j.carbon.2018.04.064 ↗
20. S. A. Abdullah, A. Iqbal, and L. Frormann, J. Appl. Polym. Sci., 110, 196 (2008).10.1002/app.28479 ↗
21. S. G. Kuzak and A. Shanmugam, J. Appl. Polym. Sci., 73, 649 (1999).10.1002/(SICI)1097-4628(19990801)73:5<649::AID-APP5>3.0.CO;2-B ↗
22. Ornaghi, Jr. H. L. Bolner, A. S. Fiorio, R. Zattera, and A. Jose, J. Appl. Polym. Sci., 118, 887 (2010).10.1002/app.32388 ↗
23. S. Mohanty, S. K. Verma, and S. K. Nayak, Compos. Sci. Technol., 66, 538 (2006).10.1016/j.compscitech.2005.06.014 ↗
24. N. Hameed, P. A. Sreekumar, B. Francis, W. M. Yang, and S. Thomas, Compos. Part A: Appl. Sci. Manuf., 38, 2422 (2007).10.1016/j.compositesa.2007.08.009 ↗