Bending rigidity of thermally bonded nonwoven structures
Source abstract
Abstract
Bending rigidity is one of the most important parameters affecting the fabric drape characteristics. In this research work, classic Freeston and Platt model, describing the bending behaviour of nonwovens specifically for thermally bonded, has been modified by accounting for number of bonds replacing the number of fibres in a unit cell. These bonds are responsible for constraining the relative fiber motion in the nonwoven structure. The anisotropic characteristics of thermally bonded nonwovens are revealed by analysing the bending properties in various test directions. In general, there is a good agreement between the bending rigidity values obtained from modified Freeston and Platt model and experimental work. However, the classic Freeston and Platt model has overestimated the bending rigidity of thermally bonded nonwoven structures. Furthermore, the effect of main fiber parameters including volume fraction, modulus and orientation characteristics has been investigated on the bending rigidity of thermally bonded nonwovens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Textile materials and evaluations · Mechanical Behavior of Composites · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. H. Morooka and M. Niwa, J. Text. Mach. Soc. Japan, 22, 67 (1976).
2. A. Shinohara, F. Shinohara, and K. Sakaebara, J. Text. Mach. Soc. Japan, 26, 75 (1980).
3. B. M. Chapman and J. W. S. Hearle, J. Text. Inst., 63, 385 (1972).10.1080/00405007208630241 ↗
4. M. L. Gaucher, M. W. King, and B. Johnston, Text. Res. J., 53, 297 (1983).10.1177/004051758305300506 ↗
5. M. Niwa and F. Seto, J. Text. Mach. Soc. Japan, 39, 161 (1986).10.4188/transjtmsj.39.11_T161 ↗
6. F. T. Pierce, J. Text. Inst., 21, T377 (1930).10.1080/19447023008661529 ↗
7. T. Y. Park and T. K. Ghosh, J. Korean Fiber Soc., 36, 455 (1999).
8. W. D. Freeston Jr. and M. M. Platt, Text. Res. J., 35, 48 (1965).10.1177/004051756503500106 ↗
9. S. M. Lee and A. S. Argon, J. Text. Inst., 74, 1 (1983).10.1080/00405008308631759 ↗
10. S. M. Lee and A. S. Argon, J. Text. Inst., 74, 12 (1983).10.1080/00405008308631760 ↗
11. S. M. Lee and A. S. Argon, J. Text. Inst., 74, 19 (1983).10.1080/00405008308631761 ↗
12. S. M. Lee and A. S. Argon, J. Text. Inst., 74, 31 (1983).10.1080/00405008308631762 ↗
13. S. V. Patel and S. B. Warner, Text. Res. J., 64, 507 (1994).10.1177/004051759406400903 ↗
14. Y. Termonia, Text. Res. J., 73, 74 (2003).10.1177/004051750307300114 ↗
15. G. C. Engelmayr and M. S. Sacks, J. Biomechanical Eng., 128, 610 (2006).10.1115/1.2205371 ↗
16. A. Rawal, S. V. Lomov, T. Ngo, I. Verpoest, and J. Vankerrebrouck, Text. Res. J., 77, 417 (2007).10.1177/0040517507081313 ↗
17. S. Backer and D. R. Petterson, Text. Res. J., 30, 704 (1960).10.1177/004051756003000912 ↗
18. S. M. Lee, Ph. D. Dissertation, Massachusetts Institute of Technology, 1978.
19. T. Komori and K. Makashima, Text. Res. J., 47, 13 (1977).10.1177/004051757704700104 ↗
20. D. H. Lee and J. K. Lee, Proceedings of 3rd Japan-Australia Joint Symposium on Objective Measurement: Applications to Product Design and Process Control Japan, 613 (1985).
21. N. Pan, J. Chen, M. Seo, and S. Backer, Text. Res. J., 67, 907 (1997).10.1177/004051759706701208 ↗
22. J. H. Lin, Z. H. Xu, C. H. Lei, and C. W. Lou, Text. Res. J., 73, 917 (2003).10.1177/004051750307301012 ↗
23. I. M. Daniel and O. Ishai, “Engineering Mechanics of Composite Materials”, New York, USA, 1994.
24. W. D. Freeston Jr. and M. M. Platt, Text. Res. J., 35, 480 (1965).10.1177/004051756503500520 ↗