journal article·2015-02

Polyester/vinylester polymer hybrid blended nanocomposites: Effect of nano on mechanical and thermal properties

Palla Hari Sankar, Yerasu Venkata Mohana Reddy, Koni Hemachandra Reddy

Fibers and Polymers· Volume 16· Issue 2
Publisher page

Abstract

The objective of this research was to gain the better understanding of hardness and impact strength of polymer blended hybrid nanocomposites in which the polyester/vinylester were mixed together to bring out the modified blended solution and it was loaded with nanoclay and carbon fiber. Hardness and impact strength were increased up to 5 wt.% clay loading, and decreases further increasing of clay content. Nanocomposites were prepared by using hand layup process and 9 wt.% of carbon fiber commonly used in all nanocomposites. Mechanical stirrer and ultra sonicator (Probe type) were used to mix clay uniformly into the modified solution. It was observed from the SEM analysis that, due to the addition of clay particles composite transformed from brittle to ductile nature and it is cumulative at 5 wt.% clay and after that void formed due to high clay content made it very difficult to mix the clay uniformly as a result of that voids are formed in the composite and these voids can be seen in the 6 wt.% clay. For 4 wt.% clay loading thermal stability was significantly improved up to 332 °C, and the glass transition temperature was improved to 3 °C when compared with 2 and 3 wt.% clay loaded samples. The proposed reaction curing mechanism of the isothalic based polyester and epoxidized novolac vinyl ester resin was found to be well suitable for blend systems confirmed by FT IR analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Silicone and Siloxane Chemistry · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. P. Hari Sankar, Y. V. Mohana Reddy, K. Hemacahndra Reddy, and M. Ashok Kumar, Int. Lett. Nat. Sci., 3, 7 (2014).10.18052/www.scipress.com/ILNS.8.7 ↗
2. K. V. P. Chakradhar, K. Venkata Subbaiah, M. Ashok Kumar, and G. Ramachandra Reddy, Malay. Polym. J., 6, 109 (2011).
3. M. Ashok Kumar, K. Hemachandra Reddy, Y. V. Mohana Reddy, G. Ramachandra Reddy, and S. Venkata Naidu, Int. J. Polym. Mater. Polym. Biomat., 59, 854 (2010).10.1080/00914037.2010.504144 ↗
4. A. Varada Rajulu, G. Babu Rao, and R. Lakshminarayana Reddy, J. Polym. Mater., 23, 234 (2001).
5. A. Varada Rajulu, G. Babu Rao, and R. Lakshminarayana Reddy, Ind. J. Fib. Text. Res., 25, 295 (2000).
6. A. Varada Rajulu, S. V. Sanjeev Kumar, and G. Babu Rao, J. Rein. Plas. Comp., 22, 200 (2001).
7. A. Varada Rajulu, L. Ganga Devi, and G. Babu Rao, J. Appl. Polym. Sci., 89, 2970 (2003).10.1002/app.12399 ↗
8. K. M. Mannan and M. A. I. Talukder, Polymer, 38, 2493 (1997).10.1016/S0032-3861(96)00804-X ↗
9. M. Wang and W. Bonfield, Biomaterials, 22, 1311 (2001).10.1016/S0142-9612(00)00283-0 ↗
10. D. Choi, K. G. Marra, and P. N. Kumta, Mater. Res. Bull., 39, 417 (2004).10.1016/j.materresbull.2003.10.013 ↗
11. L. Calandrelli, B. Immirzi, M. Malinconico, M. G. Volpe, A. Oliva, and F. Della Ragione, Polymer, 41, 8027 (2000).10.1016/S0032-3861(00)00165-8 ↗
12. A. R. Boccaccini and V. Maquet, Compos. Sci. Technol., 63, 2417 (2003).10.1016/S0266-3538(03)00275-6 ↗
13. S. Verrier, J. J. Blaker, V. Maquet, and L. L. Hench, Biomaterals, 25, 3013 (2004).10.1016/j.biomaterials.2003.09.081 ↗
14. L. Borum-Nicholas and O. C. Wilson Jr, Biomaterials, 24, 3671 (2003).10.1016/S0142-9612(03)00239-4 ↗
15. X. J. Wang, Y. Li, J. Wei, and K. de Groot, Biomaterials, 23, 4787 (2002).10.1016/S0142-9612(02)00229-6 ↗
16. Q. Liu and C. A. van Blitterswijk, J. Biomed. Mater. Res. Part A, 40, 358 (1997).10.1002/(SICI)1097-4636(19980605)40:3<358::AID-JBM3>3.0.CO;2-E ↗
17. Q. Liu, J. R. de Wijn, K. de Groot, and C. A. Van Blitterswijk, Biomaterials, 19, 1067 (1998).10.1016/S0142-9612(98)00033-7 ↗
18. Q. Liu, J. R. de Wijn, and C. A. Van Blitterswijk, J. Biomed. Mater. Res. Part A, 40, 490 (1998).10.1002/(SICI)1097-4636(19980605)40:3<490::AID-JBM20>3.0.CO;2-M ↗