journal article·2017-10

Uniaxially drawn polylactic acid film based physiological sensor for monitoring sleeping parameters

Ruthirapathi Tamil Selvan, Yu Jin Ahn, Kap Jin Kim, Hongdoo Kim

Fibers and Polymers· Volume 18· Issue 10
Publisher page

Abstract

In this study, we investigated the effect of cutting angle, draw ratio (DR), and degree of orientation on the shearpiezoelectric behavior of uniaxially drawn PLA film. Piezoelectric results suggest that the PLA film with DR=4.5 and cutting angle of 45o exhibit maximum shear-piezoelectricity as expected. Piezoelectric output signals of drawn PLA films well correlated with birefringence rather than draw ratio due to the fact that the degree of chain orientation is not directly proportional to draw ratio. A physiological sensing belt (PSB) was developed by implanting silicone rubber coated PLA film in between two elastic textile bands and mounted on the mattress to monitor physiological signals such as heartbeat and respiration rate. Physiological signals were acquired during sleeping of the human subject through the elongation of PLA film implanted in the PSB sensor. Heartbeat and respiration rates of the subject during sleep were easily estimated to be 70 min-1 and 18.6 min-1, respectively. Monitoring of cardio-respiratory signals during sleep using our PLA film based PSB sensor was found to be very useful for diagnosing sleep related disorders such as sleep-apnea, snoring, insomnia, etc.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Ergonomics and Musculoskeletal Disorders

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. S. J. Lee, A. A. Prabu, and K. J. Kim, Mater. Lett., 148, 58 (2015).10.1016/j.matlet.2015.02.038 ↗
2. Y. Tajitsu, IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 55, 1000 (2008).10.1109/TUFFC.2008.746 ↗
3. Y. Ikada, K. Jamshidi, H. Tsuji, and S. H. Hyon, Macromolecules, 20, 904 (1987).10.1021/ma00170a034 ↗
4. W. Hoogsteen, A. R. Postema, A. J. Pennings, G. T. Brinke, and P. Zugenmaier, Macromolecules, 23, 634 (1990).10.1021/ma00204a041 ↗
5. Q. Y. Pan, S. Tasaka, and N. Inagaki, Jpn. J. Appl. Phys., 35, 1442 (1996).10.1143/JJAP.35.L1442 ↗
6. M. Ando, H. Kawamura, H. Kitada, Y. Sekimoto, T. Inoue, and Y. Tajitsu, Jpn. J. Appl. Phys., 52, 09KD17 (2013).10.7567/JJAP.52.09KD17 ↗
7. A. Tagaya and Y. Koike, Polymer, 44, 306 (2012).10.1038/pj.2011.141 ↗
8. Y. M. Chang, J. S. Lee, and K. J. Kim, Solid State Phenom., 124-126, 299 (2007).10.4028/www.scientific.net/SSP.124-126.299 ↗
9. K. J. Kim, S. Yoon, Y. M. Chang, and J. S. Lee, “Proc. of the 9th Asian Textile Conf.”, p.98, Taichung, Taiwan, 2007.
10. K. J. Kim, Y. M. Chang, S. Yoon, and H. J. Kim, Integrated Ferroelectrics, 107, 53 (2009).10.1080/10584580903324493 ↗
11. Y. J. Ahn, S. Yoon, and K. J. Kim, Text. Sci. Eng., 49, 392 (2012).10.12772/TSE.2012.49.6.392 ↗
12. T. Penzel and R. Conradt, Sleep Med. Rev., 4, 131 (2000).10.1053/smrv.1999.0087 ↗
13. M. H. Kryger, T. Roth, and W. C. Dement, “Principles and Practice of Sleep Medicine”, 5th ed., pp.16–26, Elsevier Saunders, 2011.
14. B. El-Ad and P. Lavie, Int. Rev. Psychiatry, 17, 277 (2005).10.1080/09540260500104508 ↗
15. M. Hirshkowitz, I. Karacan, A. Gurakar, and R. L. Williams, Sleep, 12, 223 (1989).10.1093/sleep/12.3.223 ↗
16. R. L. Wilkin, “Clinical Assessment in Respiratory Care”, pp.268–272, Mosby, 1985.
17. Y. Peker, J. Hedner, A. Johansson, and M. Bende, Sleep, 20, 645 (1997).10.1093/sleep/20.8.645 ↗
18. W. W. Flemons, D. Buysse, S. Redline, A. Pack, K. Strohl, J. Wheatley, T. Young, N. Douglas, P. Levy, W. McNicholas, J. Fleetham, D. White, W. Schmidt-Nowarra, D. Carley, and J. Romaniuk, Sleep, 22, 667 (1999).10.1093/sleep/22.5.667 ↗
19. K. J. Kim, J. H. Bae, and Y. H. Kim, Polym. Int., 52, 35 (2003).10.1002/pi.981 ↗
20. M. Ando, H. Kawamura, K. Kageyama, and Y. Tajitsu, Jpn. J. Appl. Phys., 51, 09LD14 (2012).10.7567/JJAP.51.09LD14 ↗
21. M. O. Oh and S. H. Kim, Polymer Int., 63, 1247 (2014).10.1002/pi.4630 ↗
22. S. A. Arvidson, K. C. Wong, R. E. Gorga, and S. A. Khan, Polymer, 53, 791 (2012).10.1016/j.polymer.2011.12.042 ↗
23. H. Iwasaki, M. Okano, N. Komatsubara, M. Nakamura, A. Moriwaki, H. Sato, and S. Watanabe, IEEE Xplore (IRMMWTHz), 7758642 (2016).
24. C. S. Lovell, J. M. Fitz-Gerald, and C. Park, J. Polym. Sci. Pt. B-Polym. Phys., 49, 1555 (2011).10.1002/polb.22345 ↗