journal article·2021-06

Influence of Fiber Surface Treatment on Hydrothermal Aging Behavior of a Woven Thermoplastic Laminate

Defang Zhao, Hiroyuki Hamada, Yuqiu Yang

Fibers and Polymers· Volume 22· Issue 6
Publisher page

Abstract

A detailed investigation on the effects of hydrothermal aging on the mechanical and thermal performance of woven carbon-fiber-reinforced polyamide 6 (CF/PA6) laminates processed using hot compression molding is presented. A surface treatment with a polyurethane dispersion (PUD) agent is applied on CFs to enhance the interfacial bonding capability between the CF and PA6 matrix. The moisture uptake results indicate that untreated CF/PA6 laminates exhibit higher equilibrium moisture absorption (M∞), corrected diffusion coefficient (DC), and rate of diffusion (k) than treated CF/PA6 laminates, implying that the interface damage of untreated CF/PA6 laminates is more pronounced than that of treated CF/PA6 laminates. The mechanical performance of the CF/PA6 laminates reduces significantly after water absorption and hydrothermal aging. Nevertheless, PUD-treated composites exhibit higher remaining flexural property than the virgin composites, due to the improved durability of CF/PA6 interface, as verified by the scanning electron microscopy results. Dynamic mechanical properties (i.e., Tg, storage modulus, and tan δ) of the treated CF/PA6 laminates degrade more slowly than those of the untreated CF/PA6 laminates. Finally, the relationships between flexural property retention and moisture absorption ratio (i.e., Mt/M∞), and between flexural property retention and tan δ for both types of CF/PA6 laminates are established.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Natural Fiber Reinforced Composites · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. M. Sharma, S. Gao, E. Mäder, H. Sharma, L. Y. Wei, and J. Bijwe, Compos. Sci. Technol., 102, 35 (2014).10.1016/j.compscitech.2014.07.005 ↗
2. M. G. Huson, J. S. Church, A. A. Kafi, A. L. Woodhead, J. Khoo, M. Kiran, J. E. Bradby, and B. L. Fox, Carbon, 68, 240 (2014).10.1016/j.carbon.2013.10.084 ↗
3. A. Kafi, M. Huson, C. Creighton, J. Khoo, L. Mazzola, T. Gengenbach, F. Jones, and B. Fox, Compos. Sci. Technol., 94, 89 (2014).10.1016/j.compscitech.2014.01.011 ↗
4. M. Eftekhari and A. Fatemi, Polym. Test., 51, 151 (2016).10.1016/j.polymertesting.2016.03.011 ↗
5. S. Alessi, G. Pitarresi, and G. Spadaro, Compos. Part B-Eng., 67, 145 (2014).10.1016/j.compositesb.2014.06.006 ↗
6. M. Meng, H. Le, S. Grove, and M. J. Rizvi, Compos. Struct., 154, 49 (2016).10.1016/j.compstruct.2016.06.078 ↗
7. C.-H. Shen and G. S. Springer, J. Compos. Mater., 11, 2 (1977).10.1177/002199837701100102 ↗
8. C.-H. Shen and G. S. Springer, J. Compos. Mater., 11, 250 (1977).10.1177/002199837701100301 ↗
9. D. Karalekas, J. Cugnoni, and J. Botsis, Compos. Sci. Technol., 69, 507 (2009).10.1016/j.compscitech.2008.11.028 ↗
10. Z. M. Ishak and J. Berry, J. Appl. Polym. Sci., 51, 2145 (1994).10.1002/app.1994.070511306 ↗
11. H. R. Dana, A. Perronnet, S. Fréour, P. Casari, and F. Jacquemin, J. Compos. Mater., 47, 1081 (2013).10.1177/0021998313477963 ↗
12. L.-R. Bao and A. F. Yee, Compos. Sci. Technol., 62, 2111 (2002).10.1016/S0266-3538(02)00162-8 ↗
13. Y. Weitsman, Compos. Pt. A Appl. Sci. Manuf., 37, 617 (2006).10.1016/j.compositesa.2005.05.022 ↗
14. T. Peret, A. Clément, S. Fréour, and F. Jacquemin, Compos. Struct., 116, 395 (2014).10.1016/j.compstruct.2014.05.026 ↗
15. O. Ishai, Polym. Eng. Sci., 15, 491 (1975).10.1002/pen.760150704 ↗
16. H. Dhakal, Z. Zhang, and M. Richardson, Compos. Sci. Technol., 67, 1674 (2007).10.1016/j.compscitech.2006.06.019 ↗
17. L. Bian, J. Xiao, J. Zeng, and S. Xing, J. Compos. Mater., 46, 3151 (2012).10.1177/0021998312436992 ↗
18. T. Alomayri, H. Assaedi, F. Shaikh, and I. M. Low, J. Asian. Ceram. Soc., 2, 223 (2014).10.1016/j.jascer.2014.05.005 ↗
19. C. Humeau, P. Davies, and F. Jacquemin, Compos. Pt. A Appl. Sci. Manuf., 107, 94 (2018).10.1016/j.compositesa.2017.12.016 ↗
20. S. A. Grammatikos, M. Evernden, J. Mitchels, B. Zafari, J. T. Mottram, and G. C. Papanicolaou, Mater. Des., 96, 283 (2016).10.1016/j.matdes.2016.02.026 ↗
21. J. Hughes, Compos. Sci. Technol., 41, 13 (1991).10.1016/0266-3538(91)90050-Y ↗
22. J.-S. Lee and T.-J. Kang, Carbon, 35, 209 (1997).10.1016/S0008-6223(96)00138-8 ↗
23. R. L. Clark Jr., M. D. Craven, and R. G. Kander, Compos. Pt. A Appl. Sci. Manuf., 30, 37 (1999).10.1016/S1359-835X(98)00083-9 ↗
24. B. Ray, J. Colloid. Interf. Sci., 298, 111 (2006).10.1016/j.jcis.2005.12.023 ↗
25. D. C. Haeberle, J. J. Lesko, S. W. Case, J. S. Riffle, and K. E. Verghese, J. Adhes. Sci. Technol., 21, 35 (2007).10.1163/156856107779976123 ↗
26. I. Harry, B. Saha, and I. Cumming, Carbon, 45, 766 (2007).10.1016/j.carbon.2006.11.018 ↗
27. M. Montes-Morán, F. Van Hattum, J. Nunes, A. Martinez-Alonso, J. Tascón, and C. Bernardo, Carbon, 8, 1795 (2005).10.1016/j.carbon.2005.02.005 ↗
28. H. Xiao, Y. Lu, M. Wang, X. Qin, W. Zhao, and J. Luan, Carbon, 52, 427 (2013).10.1016/j.carbon.2012.09.054 ↗
29. S. Rahmanian, K. Thean, A. Suraya, M. Shazed, M. M. Salleh, and H. Yusoff, Mater. Des., 43, 10 (2013).10.1016/j.matdes.2012.06.025 ↗
30. L. Meng, D. Fan, C. Zhang, Z. Jiang, and Y. Huang, Compos.Part B-Eng., 56, 575 (2014).10.1016/j.compositesb.2013.08.025 ↗
31. Z. Zhao, K. Teng, N. Li, X. Li, Z. Xu, L. Chen, J. Niu, H. Fu, L. Zhao, and Y. Liu, Compos. Struct., 159, 761 (2017).10.1016/j.compstruct.2016.10.022 ↗
32. W. Qin, F. Vautard, L. T. Drzal, and J. Yu, Compos. Part B-Eng., 69, 335 (2015).10.1016/j.compositesb.2014.10.014 ↗
33. S. Zhang, W. Liu, L. Hao, W. Jiao, F. Yang, and R. Wang, Compos. Sci. Technol., 88, 120 (2013).10.1016/j.compscitech.2013.08.035 ↗
34. D. Zhao, H. Hamada, and Y. Yang, Compos.Part B-Eng., 160, 535 (2019).10.1016/j.compositesb.2018.12.105 ↗
35. JIS K. 7074, “Testing Methods for Flexural Properties of Carbon Fiber Reinforced Plastics”, Japanese Industrial Standard, Japanese Standards Association, 1988.
36. Q. Wu, X. Liu, and L. A. Berglund, Macromol. Rapid. Comm., 22, 1438 (2001).10.1002/1521-3927(20011101)22:17<1438::AID-MARC1438>3.0.CO;2-U ↗
37. J. Wang, H. GangaRao, R. Liang, and W. Liu, J. Reinf. Plast. Comp., 35, 179 (2016).10.1177/0731684415610920 ↗
38. C.-H. Shen and G. S. Springer, J. Compos. Mater., 10, 2 (1976).10.1177/002199837601000101 ↗
39. G. Xian and V. M. Karbhari, J. Appl. Polym. Sci., 104, 1084 (2007).10.1002/app.25576 ↗
40. G. Xian, H. Li, and X. Su, J. Compos. Mater., 47, 2275 (2013).10.1177/0021998312457099 ↗
41. S. Neumann and G. Marom, J. Compos. Mater., 21, 68 (1987).10.1177/002199838702100105 ↗
42. Z. Wang, G. Xian, and X.-L. Zhao, Constr. Build. Mater., 161, 634 (2018).10.1016/j.conbuildmat.2017.11.171 ↗
43. I. Rocha, S. Raijmaekers, R. Nijssen, F. van der Meer, and L. Sluys, Compos. Struct., 174, 110 (2017).10.1016/j.compstruct.2017.04.028 ↗
44. E. Barjasteh and S. Nutt, Compos. Pt. A Appl. Sci. Manuf., 43, 158 (2012).10.1016/j.compositesa.2011.10.003 ↗
45. Y. Ma, S. Jin, M. Ueda, T. Yokozeki, Y. Yang, F. Kobayashi, H. Kobayashi, T. Sugahara, and H. Hamada, Compos. Part B-Eng., 154, 90 (2018).10.1016/j.compositesb.2018.07.060 ↗
46. E. O. Ogunsona, M. Misra, and A. K. Mohanty, Polym. Degrad. Stabil., 139, 76 (2017).10.1016/j.polymdegradstab.2017.03.013 ↗
47. T. Brocks, M. O. H. Cioffi, and H. J. C. Voorwald, Appl. Surf. Sci., 274, 210 (2013).10.1016/j.apsusc.2013.03.018 ↗
48. D. Mamalis, T. Flanagan, and C. M. Ó. Brádaigh, Compos. Pt. A Appl. Sci. Manuf., 110, 93 (2018).10.1016/j.compositesa.2018.04.013 ↗
49. T. Yu, J. Ren, S. Li, H. Yuan, and Y. Li, Compos. Pt. A Appl. Sci. Manuf., 41, 499 (2010).10.1016/j.compositesa.2009.12.006 ↗
50. S. Deng, X. Zhou, M. Zhu, C. Fan, and Q. Lin, Express. Polym. Lett., 7 (2013).10.3144/expresspolymlett.2013.90 ↗