Development of a TEM Optical System for the Atomic-Resolution Magnetic-Field-Free Electron Microscope
Source abstract
Abstract
An objective lens with a short focal length has characteristics suitable for high-resolution observation, such as high magnification and low chromatic aberration. To obtain these characteristics, ordinary high-resolution electron microscopes realize short focal lengths by placing the sample in a strong magnetic field of about 2 to 3 T. However, when observing magnetic samples, such a strong magnetic field causes problems such as sample deformation, changes in the magnetic structure, and aberrations due to disturbances in the lens field. To solve these problems, a research group from the University of Tokyo and JEOL has developed an electron microscope that allows high-resolution observation even in a magnetic-field-free environment around the sample [1]. This electron microscope uses a newly developed magnetic-field-free objective lens composed of two round lenses with short focal lengths in front and back of the specimen as schematically shown in Fig. 1. The magnetic poles and coils are placed symmetrically with respect to the specimen plane. Since the directions of coil excitation are opposite, the z components of magnetic fields of the two lenses cancel on the sample plane. This cancellation allows strong magnetic fields to be close to the specimen, while the field is very small on it. The combination of this lens and a higher-order aberration corrector [2] enables atomic-resolution observation in a magnetic-field-free environment. One of the promising applications of the atomic-resolution magnetic-field-free electron microscope is the study on ferromagnetic materials such as steel. Since lattice defects such as cavities and dislocations affect the macroscopic physical properties, an accurate understanding of the dynamic behaviours of these defects at the nano/atomic level is required in order to develop new materials, such as high-strength steel materials. Conventional TEM methods are effective tools in the analysis of such dynamic phenomena. As Fig. 1 shows, the magnetic-field-free objective is symmetrical to the specimen plane, so the optical properties of the objective lens for STEM and TEM are also the same. Most of the previous results of magnetic-field-free electron microscopy have been reported using aberration-corrected STEM [3], however, high-resolution TEM observations will also be possible if an aberration corrector is configured in the imaging system. Conventional TEM images can be taken simultaneously if an objective aperture can be added at the appropriate position. We have therefore developed an electron microscope with aberration correctors both in the illumination and in the image forming systems. A new optical system was also developed to position the objective aperture on the diffraction plane between the aberration corrector and the intermediate lens since the structure of the magnetic-field-free objective lens is so complex that it is not possible to configure an objective aperture around the sample. Fig. 2 and 3 show observation results of an iron sample acquired by utilizing the atomic-resolution magnetic-field-free electron microscope with the newly developed optical system. As shown in Fig. 2 (a) and (b), bright-field and dark-field images of dislocations could be acquired. The high-resolution TEM image of the Fe [100] was easily obtained as shown in Fig. 3 (a). The lattice resolution of around 0.1 nm was confirmed from the Fourier transform image as shown in Fig. 3 (b). The newly developed optics of the field-free electron microscope enables the high-resolution and convectional TEM image acquisition in addition to the STEM images. We will discuss the recent results of magnetic materials obtained by this electron microscope. A schematic illustration of the magnetic-field-free objective lens. (a) Bright-field and (b) weak-beam dark-field images of dislocations in Fe sample observed from [111] direction. (a) High-resolution TEM image of Fe [100]. (b) The Fourier transform of (a). Spots of iron oxide on the surface exist in the image.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Electron Microscopy Techniques and Applications · Electron and X-Ray Spectroscopy Techniques · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
JEOL Ltd. , Akishima, Tokyo , Japan
Next Generation TATARA Co-Creation Centre (NEXTA), Shimane University , Matsue, Shimane , Japan
References (3)
Show source-provided references
1. Shibata · Nature Communications · 2019 · 1010.1038/s41467-019-10281-2 ↗
2. Sawada · Journal of Electron Microscopy · 2009 · 58
3. Kohno · Kenbikyo · 2023 · 57