Design of a curved stabilizer with damping orifices for reducing axial run-out of flexible optical disks
Source abstract
Abstract
The idea of a curved stabilizer with damping orifices is applied to the high speed rotating flexible optical disk system in order to reduce the disk deflection and the axial run-out of the disk. A track of orifices is drilled along the edge of a curved annular stabilizer. The effects of the diameter and length of each orifice, number of orifices, and radial position of the orifices on the reduction of axial run-out of the disk are investigated experimentally together with the effects of the inner radius for the air flow, initial gap height, and rotational speed. The experimental results showed that the curved stabilizer with orifices can reduce the axial run-out of the disk at 10,000 rpm within 10 µm over the entire span of the disk.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor Lasers and Optical Devices · Advanced Surface Polishing Techniques · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. Blackstock DT (2000) Fundamentals of physical acoustics. Wiley, New York, pp 144–156
2. Gad AMM, Rhim YC (2008) Numerical simulations of a flexible disk rotating close to a rigid rotating wall. Jap J Appl Phys 47(7):5835–5841
3. Gad AMM, Rhim YC (2009a) Towards a flat rotating flexible disk for high speed optical data storage. In: International symposium on optical memory, Nagasaki10.1143/JJAP.49.08KC01 ↗
4. Gad AMM, Rhim YC (2009b) Passive-damping of the axial run-out for high speed rotating flexible disk using the idea of damping orifice. In: International symposium on optical memory, Nagasaki10.1143/JJAP.49.08KC03 ↗
5. Onagi N, Aman Y, Murata S, Uchida K (2004) High-density recording on air-stabilized flexible optical disk. Jap J Appl Phys 43(7B):5009–501310.1143/JJAP.43.5009 ↗
6. Popov G, Sankar S (1995) Modelling and analysis of non-linear orifice type damping in vibration isolators. J Sound Vib 183(5):751–76410.1006/jsvi.1995.0284 ↗
7. Zinn BT (1970) A theoretical study of non-linear damping by Helmholtz resonators. J Sound Vib 13(3):347–35610.1016/S0022-460X(70)80023-2 ↗