Stress analysis in new improved differential vertical comb capacitive micro accelerometer using SOI technology
Source abstract
Abstract
Recently a new improved differential vertical comb type capacitive accelerometer using silicon on insulator (SOI) technology reported having better performance than dissolve wafer process (DWP) technology. Effective figure of merit shown is much higher compared to other comb-based technologies presented in literature. Theoretical formulations developed for residual and working stress which can be utilized for optimizing the performance of microaccelerometer. Maximum reported experimental mean stress (500 MPa) and stress gradient (0.1 MPa/µm) is also studied in detail. A comparison of analytical and simulations for stress induced deflections are in good agreement (within 5.29% and 3.97%) for residual planar and axial stress respectively. Working shear stress in torsional beams at 30 g in proposed new differential vertical SOI comb type accelerometer is lesser by 20.9 MPa compared to DWP technology. For 1000 g shock, the SOI case, stress of 0.55 GPa having a better safety margin by a of factor of 2 compared to fracture limit (FL) of 1.1 GPa of silicon. In contrast to this, DWP has a stress of 1.25 GPa and hence it crosses FL value and has no safety margin. Warping stress induced in restrained torsional beam have been analyzed and compared with simulation results and found to be in good agreement within 1.87% for SOI technology case and 11.25% for DWP technology case. The effect of initial tip deflection (3.4 µm due to 500 MPa stress and 0.1 MPa/µm stress gradient) on sensitivity has marginal effect on milli g range but has moderate influence on limiting high g operational range.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced MEMS and NEMS Technologies · Advanced machining processes and optimization · Mechanical and Optical Resonators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Ballestra A, Soma A, Pavanello R (2008) Experimental-numerical comparison of the cantilever MEMS frequency shifts in presence of a residual stress gradient. Sensors 8:767–78310.3390/s8020767 ↗
2. Bao M (2005) Analysis and design principles of MEMS devices. Elsevier, Amsterdam
3. Chaker M, Boily S, Diawara Y, EI Khakani MA, Gat E, Jean A, lafontaine H, Pepin H, Voyer J, Kieffer JC (1992) X-ray mask development based on SiC membrane and W absorber. J Vac Sci Technol B 10:3191–3195. https://doi.org/10.1116/1.58591010.1116/1.585910 ↗
4. Chen KS (2006) Techniques in residual stress measurement for MEMS and their applications. In: Leondes CT (ed) MEMS/NEMS. Springer, Boston. https://doi.org/10.1007/0-387-25786-1_3310.1007/0-387-25786-1_33 ↗
5. Chen W-F, Atsuta T (1977) Theory of beam-columns: space behavior and design, vol 2. J. Ross Publishing, New York
6. Chen K-S, Zhang X, Lin S-Y (2003) Intrinsic stress generation and relaxation of plasma-enhanced chemical vapor deposited oxide during deposition and subsequent thermal cycling. Thin Solid Films 434:190–20210.1016/S0040-6090(03)00462-0 ↗
7. Chen Z, Guo M, Zhang R, Zhou B, Wei Q (2018) Measurement and isolation of thermal stress in silicon-on-glass MEMS structures. Sensors 18:1–14. https://doi.org/10.3390/s1808260310.3390/s18082603 ↗
8. Chu W-H, Mehregany M (1993) A study of residual stress distribution through the I thickness of p + silicon. Films IEEE Trans Electron Devices 40:1245–125010.1109/16.216428 ↗
9. Chunga C-K, Linb T-Y, Duhb J-G, Ming-Qun T (2005) Global and local residual stress in silicon carbide films produced by plasma-enhanced chemical vapor deposition. Surf Coat Technol 200:4825–483410.1016/j.surfcoat.2005.04.048 ↗
10. Dounkal MK, Bhan RK, Kumar N (2020) A new improved vertical comb type differential capacitive sensing micro accelerometer using SOI wafer technology. J Micromech Microeng 26:377–394 ()
11. Dutta S, Shaveta M, Imran R, Pal, Bhan RK (2014) Diffusion induced residual stress in comb-type microaccelerometer structure. J Mater Sci Mater Electron. https://doi.org/10.1007/s10854-014-2095-810.1007/s10854-014-2095-8 ↗
12. El Khakani MA, Chaker M, Jean A, Boily S, Pepin H, Kieffer JC (1993) Effect of rapid thermal annealing on both the stress and the bonding states of a-SiC: H films. J Appl Phys 74:2834. https://doi.org/10.1063/1.35463510.1063/1.354635 ↗
13. Fang W, Wickert JA (1995) Determining mean and gradient residual stresses in thin films using micromachined cantilevers. J Micromech Microeng 6:301–30910.1088/0960-1317/6/3/002 ↗
14. Freund LB, Floro JA, Chason E (1999) Extensions of the Stoney formula for substrate curvature to configurations with thin substrates or large deformations. Appl Phys Lett 74:1987–1989. doi:https://doi.org/10.1063/1.123722()10.1063/1.123722 ↗
15. Guo Y, Zhou J, Huang Y, Bao MH (2007) Modelling of photoinduced deformation in silicon microcantilever. Sensors 7:1713–171910.3390/s7091713 ↗
16. Ni A, Sherman D, Ballarini R, Kahn H, MI B, Philips SM, Heuer AH (2003) Optimal design of multilayered polysilicon films for prescribed curvature. J Mater Sci 38:4169–417310.1023/A:1026333707011 ↗
17. Ramsay A, Maunder EAW (2016) The influence and modelling of warping restraint on beam. Struct Mag
18. Saxena PK (2010) Improved opto-thermal-mechanical model for silicon based microcantilever. J Nanoelectron Optoelectron 5:355–359. https://doi.org/10.1166/jno.2010.112310.1166/jno.2010.1123 ↗
19. Selvakumar A, Najafi K (1998) A high-sensitivity-axis capacitive silicon microaccelerometer with a torsional suspension. JMEMS 7:192–200
20. Stoney GG (1909) The tension of metallic films deposited by electrolysis. Proc R Soc Lond 82:172–175
21. Timoshenko SP (1953) History of strength of material. McGraw-Hill, New York
22. Warren CY, Budynas RG (2002) Roark’s formulas for stress and strain, 7th edn. McGraw-Hill, New York
23. Zhou L, Hosseini BS, Tsuruga T, Shimizu J, Eda H (2007) Fabrication and evaluation for extremely thin Si wafer. Int J Abrasive Technology 1:94–10510.1504/IJAT.2007.013852 ↗