Micro fabrication of cyclic olefin copolymer (COC) based microfluidic devices
Source abstract
Abstract
Microfabrication of polymer using hot embossing technique are becoming increasingly important and considered as low-cost alternative to the silicon or glass-based micro-electro-mechanical systems technologies. This report is based on a parametric study on the hot embossing of cyclic olefin copolymer (COC) (Topas-6015 grade). The key process parameters in hot embossing such as the embossing temperature, load, the holding time and the demolding temperature significantly impact the quality of the embossed product. The work was performed to understand the influence of the various process parameters on the embossed micro-size patterns with the aim to develop the capability for microfluidic devices manufacturing. Microembossed polymer replicates were measured using a PLμ confocal microscope and inspected using a scanning electron microscope. It was established that the optimal embossing temperature for COC is 10°C above its Tg, while an optimal embossing load of 2.94 kN and holding time of 180 s are required. We have also demonstrated the effective sealing of the microchannel without destroying the channel integrity by thermal bonding technique.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microfluidic and Capillary Electrophoresis Applications · Nanofabrication and Lithography Techniques · Innovative Microfluidic and Catalytic Techniques Innovation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Anthony BW, Hardt DE, Hale M, Zarrouati N (2010) A research factory for polymer microdevices: muFac. In: Holger Becker, Wanjun Wang (eds) Microfluidics, BioMEMS, and medical microsystems VIII. California, SPIE, 2010. 75930A-12. ©2010 SPIE—The International Society for Optical Engineering10.1117/12.845701 ↗
2. Becker H, Gartner C (2000) Polymer microfabrication methods for microfluidic analytical applications. Electrophoresis 21:12–2610.1002/(SICI)1522-2683(20000101)21:1<12::AID-ELPS12>3.0.CO;2-7 ↗
3. Becker H, Heim U (2000) Hot embossing as a method for the fabrication of polymer high aspect ratio structures. Sens Actuators A 83:130–13510.1016/S0924-4247(00)00296-X ↗
4. Duffy DC, McDonald JC, Schueller OJA, Whitesides GM (1998) Rapid prototyping of microfluidic systems in polydimethylsiloxane. Anal Chem 70:4974–498410.1021/ac980656z ↗
5. Fujii T (2002) PDMS-based microfluidic devices for biomedical applications. Microelectron Eng 61–62:907–91410.1016/S0167-9317(02)00494-X ↗
6. Gale MT (1997) Replication techniques for diffractive optical elements. Microelectron Eng 34:321–33910.1016/S0167-9317(97)00189-5 ↗
7. Jena RK, Chester SA, Srivastava V, Yue CY, Anand L, Lam YC (2010) Large strain thermo-mechanical behaviour of a cyclic olefin copolymer (TOPAS) with application to hot embossing and thermal bonding for the fabrication of microfluidic devices. Sens Actuators B: Chem 155:93–10510.1016/j.snb.2010.11.031 ↗
8. Juang YJ, Lee LJ, Koelling KW (2002a) Hot embossing in microfabrication. Part I: Experimental. Polymer Eng Sci 42:539–55010.1002/pen.10970 ↗
9. Juang YJ, Lee LJ, Koelling KW (2002b) Hot embossing in microfabrication. Part II: Rheological characterization and process analysis. Polymer Eng Sci 42:551–56610.1002/pen.10971 ↗
10. Lei K, Li W, Yam Y (2005) Effects of contact-stress on hot-embossed PMMA microchannel wall profile. Microsyst Technol 11:353–35710.1007/s00542-004-0454-8 ↗
11. Li C, Yang Y, Craighead HG, Lee KH (2005) Isoelectric focusing in cyclic olefin copolymer microfluidic channels coated by polyacrylamide using a UV photografting method. Electrophoresis 26:1800–180610.1002/elps.200410309 ↗
12. Lichtenberg J, de Rooij NF, Vepoorte E (2002) A microchip electrophoresis system with integrated in-plane electrodes for contactless conductivity detection. Electrophoresis 23:3769–378010.1002/1522-2683(200211)23:21<3769::AID-ELPS3769>3.0.CO;2-E ↗
13. Mair DA, Geiger E, Pisano AP, Frechetacd JMJ, Svec F (2006) Injection molded microfluidic chips featuring integrated interconnects. Lab Chip 6:1346–135410.1039/B605911B ↗
14. McCormick RM, Nelson RJ, Alonso MG, Benvegnu DJ, Hooper HH (1997) Microchannel electrophoretic separations of DNA in injection molded plastic substrate. Anal Chem 69:2626–263010.1021/ac9701997 ↗
15. McDonald JC, Duffy DC, Anderson JR, Chiu DT, Wu H, Schueller OJA, Whitesides GM (2000) Fabrication of microfluidic systems poly(dimethylsiloxane). Electrophoresis 21:27–4010.1002/(SICI)1522-2683(20000101)21:1<27::AID-ELPS27>3.0.CO;2-C ↗
16. Nielsen T, Nilsson D, Bundgaard F, Shi P, Szabo P, Geschke O, Kristensen A (2004) Nanoimprint lithography in the cyclic olefin copolymer, Topas, a highly ultraviolet-transparent and chemically resistant thermoplast. J Vac Sci Technol B: Microelectron Nanometer Struct 22:1770–177510.1116/1.1771665 ↗
17. Scheer HC, Schultz H (2001) A contribution to the flow behaviour of thin polymer films during hot embossing lithography. Microelectronic Eng 56:311–33210.1016/S0167-9317(01)00569-X ↗
18. Seunarine K, Gadegaard N, Riehle MO, Wilkinson CDW (2006) Optical heating for short hot embossing cycle times. Microelectron Eng 83:859–86310.1016/j.mee.2005.12.026 ↗
19. Shinohara H, Mizuno J, Shoji S (2007) Fabrication of a microchannel device by hot embossing and direct bonding of poly (methyl methacrylate). Jpn J Appl Phys 46:3661–366410.1143/JJAP.46.3661 ↗
20. Srivastava V, Chester SA, Ames N, Anand L (2010) A thermo mechanically-coupled large- deformation theory for amorphous polymers in a temperature range which spans their glass transition. Int J plasticity 26:1138–118210.1016/j.ijplas.2010.01.004 ↗
21. Studer V, Pepin A, Chen Y (2002) Nanoembossing of thermoplastic polymers for microfluidic applications. Appl Phys Lett 80:3614–361610.1063/1.1479202 ↗
22. Vannahme C, Christiansen MB, Mappes T, Kristensen A (2010) Optofluidic dye laser in a foil. Opt exp 18:9280–928510.1364/OE.18.009280 ↗
23. Wabuyele MB, Ford SM, Stryjewski W, Barrow J, Soper SA (2001) Single molecule detection of double-stranded DNA in poly(methylmethacrylate) and polycarbonate microfluidic devices. Electrophoresis 21:3939–394810.1002/1522-2683(200110)22:18<3939::AID-ELPS3939>3.0.CO;2-9 ↗
24. Wang ZY, Yue CY, Lam YC, Roy S, Jena RK (2010) A modified quasi-creep model for assessment of deformation of Topas COC substrates in the thermal bonding of microfluidic devices. J App Polym Sci 122:867–87310.1002/app.34116 ↗
25. Worgull M, Kabanemi KK, Marcotte JP, Hétu JF, Heckele M (2008) Modeling of large area hot embossing. Microsyst Technol 14:1061–106610.1007/s00542-007-0493-z ↗
26. Young W (2005) Analysis of the nanoimprint lithography with a viscous model. Microelectron Eng 77:405–41110.1016/j.mee.2005.01.024 ↗