journal article·2013-09

Optimal design of fluid dynamic bearings to develop a robust disk-spindle system in a hard disk drive utilizing modal analysis

Jihoon Lee, Gunhee Jang, Kyungmoon Jung

Microsystem Technologies· Volume 19· Issue 9-10
Publisher page

Abstract

This research proposes an optimal design methodology for fluid dynamic bearings (FDBs) in a hard disk drive to improve the dynamic performance of the disk-spindle system. We solved equations of motion for the rigid rotor supported by FDBs with five degrees of freedom. Five modal damping ratios were selected as multi-objective functions. The constraint equations were the friction torque of the FDBs and the stiffness and damping coefficients related to under-damped vibration modes. Ten major design variables of the FDBs were chosen for this optimization problem. The steady-state whirl radius and the shock response at half-speed whirl of the rotating rigid spindle-bearing system were evaluated as RRO and NRRO, respectively. The RRO and NRRO of the optimal design were compared with those of the conventional design. Our results show that the proposed method effectively reduces RRO and NRRO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Lubrication Engineering · Adhesion, Friction, and Surface Interactions · Gear and Bearing Dynamics Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Hashimoto H, Matsumoto K (2001) Improvement of operating characteristics of high-speed hydrodynamic journal bearings by optimum design: part I-formulation of methodology and its application to elliptical bearing design. J Tribol 123:305–31210.1115/1.1308019 ↗
2. Hirani H, Suh NP (2005) Journal bearing design using multiobjective genetic algorithm and axiomatic design approaches. Tribol Int 38:481–49110.1016/j.triboint.2004.10.008 ↗
3. Hirayama T, Yamaguchi N, Sakai S, Hishida N, Matsuoka T, Yabe H (2009) Optimization of groove dimension in herringbone-grooved journal bearings for improved repeatable run-out characteristics. Tribol Int 42:675–68110.1016/j.triboint.2008.09.006 ↗
4. Inman DJ (2001) Engineering vibration. Prentice-Hall, Inc., New Jersey
5. Jang GH, Kim YJ (1999) Calculation of dynamic coefficients in a hydrodynamic bearing considering five degrees of freedom for a general rotor-bearing system. ASME J Tribol 121:499–50510.1115/1.2834095 ↗
6. Jang GH, Lee SH (2006) Determination of the dynamic coefficients of the coupled journal and thrust bearings by the perturbation method. Tribol Lett 22:239–24610.1007/s11249-006-9087-7 ↗
7. Jang GH, Yoon JW (2003) Stability analysis of a hydrodynamic journal bearing with rotating herringbone grooves. J Tribol 125:291–30010.1115/1.1506326 ↗
8. Jang GH, Oh SH, Lee SH (2005) Experimental study on whirling, flying and tilting motions of a 3.5 in FDB spindle system. Tribol Int 38:675–68110.1016/j.triboint.2005.01.015 ↗
9. Jang GH, Lee SH, Kim HW (2006) Finite element analysis of the coupled journal and thrust bearing in a computer hard disk drive. J Tribol 128:335–34010.1115/1.2162918 ↗
10. Kim MG, Jang GH, Kim HW (2010) Stability analysis of a disk-spindle system supported by coupled journal and thrust bearings considering five degrees of freedom. Tribol Int 43:1479–149010.1016/j.triboint.2010.02.007 ↗
11. Kim MG, Jang GH, Lee JH (2011) Robust design of a HDD spindle system supported by fluid dynamic bearings utilizing the stability analysis. Microsyst Technol 17:761–77010.1007/s00542-010-1189-3 ↗
12. Lee JH, Jang GH, Ha HJ (2012) Robust optimal design of the FDBs in a HDD to reduce NRRO and RRO. Microsyst Technol 18:1335–134210.1007/s00542-012-1539-4 ↗
13. Meirovitch L (1967) Analytical methods in vibration. Macmillan Publishing Co., Inc., New York
14. Ono K, Murashita S, Yamaura H (2005) Stability analysis of a disk-spindle supported by a plain journal bearing and pivot bearing. Microsyst Technol 11:734–74010.1007/s00542-005-0574-9 ↗
15. Yoon JK, Shen IY (2005) A numerical study on rotating-shaft spindles with nonlinear fluid-dynamic bearings. IEEE Trans Magn 41:756–76210.1109/TMAG.2004.840313 ↗