Stress-Release Rate Model for Measuring Working Stress in Concrete
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Concrete Properties and Behavior · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Xu, Z. D., and Wu, K. Y., “Damage Detection for Space Truss Structures Based on Strain Mode under Ambient Excitation,” Journal of Engineering Mechanics, ASCE, V. 138, No. 10, 2012, pp. 1215-1223. doi: 10.1061/(ASCE)EM.1943-7889.000042610.1061/(ASCE)EM.1943-7889.0000426 ↗
2. Peng, Y.; Zhao, J.; Chen, L. S.; and Dong, J., “Residual Stress Measurement Combining Blind-Hole Drilling and Digital Image Correlation Approach,” Journal of Constructional Steel Research, V. 176, Jan. 2021, p. 106346. doi: 10.1016/j.jcsr.2020.10634610.1016/j.jcsr.2020.106346 ↗
3. Schajer, G. S., “Hole-Drilling Residual Stress Measurements at 75: Origins, Advances, Opportunities,” Experimental Mechanics, V. 50, No. 2, 2010, pp. 245-253. doi: 10.1007/s11340-009-9285-y10.1007/s11340-009-9285-y ↗
4. McGinnis, M. J.; Pessiki, S.; and Turker, H., “Application of Three-Dimensional Digital Image Correlation to the Core-Drilling Method,” Experimental Mechanics, V. 45, No. 4, 2005, pp. 359-367. doi: 10.1007/BF0242816610.1007/BF02428166 ↗
5. Allain, M.; Ple, O.; Prime, N.; Roux, E.; and Vacher, P., “In Situ DIC Method to Determine Stress State in Reinforced Concrete Structures,” Measurement, V. 210, Mar. 2023, p. 112483. doi: 10.1016/j.measurement.2023.11248310.1016/j.measurement.2023.112483 ↗
6. Pessiki, S., and Turker, H., “Theoretical Formulation of the Core Drilling Method to Evaluate Stresses in Concrete Structures,” Review of Progress in Quantitative Nondestructive Evaluation, Vols 19a and 19b, V. 509, 2000, pp. 1731-1737. doi: 10.1063/1.130624110.1063/1.130624110.1063/1.1306241 ↗
7. Campione, G., and Minafo, G., “Applicability of Over-Coring Technique to Loaded RC Columns,” Structural Engineering and Mechanics, V. 51, No. 1, 2014, pp. 181-197. doi: 10.12989/sem.2014.51.1.18110.12989/sem.2014.51.1.181 ↗
8. Al-Zuheriy, A.; Orton, S.; and Washer, G., “Ultrasonic Stress Measurement in Steel Buildings,” Structures Conference 2018: Blast, Impact Loading, and Response; and Research and Education, Fort Worth, TX, Apr. 19-21, 2018, pp 43-55.10.1061/9780784481349.005 ↗
9. Al-Zuheriy, A. S. J.; Orton, S.; and Washer, G., “Evaluation of Total Compressive Stress in Steel W-Flange Members Using Ultrasonic Shear Waves,” Journal of Performance of Constructed Facilities, ASCE, V. 34, No. 6, 2020. doi: 10.1061/(ASCE)CF.1943-5509.000152010.1061/(ASCE)CF.1943-5509.0001520 ↗
10. Xu, Z. D.; Liu, M.; Wu, Z. S.; and Zeng, X., “Energy Damage Detection Strategy Based on Strain Responses for Long-Span Bridge Structures,” Journal of Bridge Engineering, ASCE, V. 16, No. 5, 2011, pp. 644-652. doi: 10.1061/(ASCE)BE.1943-5592.000019510.1061/(ASCE)BE.1943-5592.0000195 ↗
11. Pan, L.; Ge, H.; and Wang, B., “Effects of Poisson’s Ratio on the Calibration Coefficients of Hole-Drilling Strain-Gauge Method for Measuring Residual Stresses,” Strength of Materials, V. 53, No. 4, 2021, pp. 566-572. doi: 10.1007/s11223-021-00318-710.1007/s11223-021-00318-7 ↗
12. Schajer, G. S., “Application of Finite-Element Calculations to Residual-Stress Measurements,” Journal of Engineering Materials and Technology, V. 103, No. 2, 1981, pp. 157-163. doi: 10.1115/1.322498810.1115/1.3224988 ↗
13. Schajer, G. S., “Circumferential Rosette Design for Extended Depth Hole-Drilling Residual Stress Measurements,” Experimental Mechanics, V. 60, No. 9, 2020, pp. 1265-1274. doi: 10.1007/s11340-020-00660-y10.1007/s11340-020-00660-y ↗
14. Schajer, G. S., “Universal Calibration Constants for Strain Gauge Hole-Drilling Residual Stress Measurements,” Experimental Mechanics, V. 62, No. 2, 2022, pp. 351-358. doi: 10.1007/s11340-021-00771-010.1007/s11340-021-00771-0 ↗
15. Ruan, X., and Zhang, Y., “In-Situ Stress Identification of Bridge Concrete Components Using Core-Drilling Method,” Structure and Infrastructure Engineering, V. 11, No. 2, 2015, pp. 210-222. doi: 10.1080/15732479.2013.86272910.1080/15732479.2013.862729 ↗
16. Trautner, C.; McGinnis, M.; and Pessiki, S., “Analytical and Numerical Development of the Incremental Core-Drilling Method of Non-Destructive Determination of In-Situ Stresses in Concrete Structures,” Journal of Strain Analysis for Engineering Design, V. 45, No. 8, 2010, pp. 647-658. doi: 10.1177/03093247100450080110.1243/03093247JSA600 ↗
17. Trautner, C.; McGinnis, M.; and Pessiki, S., “Application of the Incremental Core-Drilling Method to Determine In-Situ Stresses in Concrete,” ACI Materials Journal, V. 108, No. 3, May-June 2011, pp. 290-299. doi: 10.14359/5168249410.14359/51682494 ↗
18. Nau, A., and Scholtes, B., “Evaluation of the High-Speed Drilling Technique for the Incremental Hole-Drilling Method,” Experimental Mechanics, V. 53, No. 4, 2013, pp. 531-542. doi: 10.1007/s11340-012-9641-110.1007/s11340-012-9641-1 ↗
19. Dabli, A. G.; Bambole, A. N.; and Bajoria, K. M., “Evaluation of In-Place Stress in Concrete by Incremental Hole Drilling,” ACI Materials Journal, V. 117, No. 4, July 2020, pp. 27-35. doi: 10.14359/5172461210.14359/51724612 ↗
20. Zhang, F. P., and Qiu, Z. G., “Analysis of Measuring Existing Stresses in Concrete Structure by Hole Drilling Core Surface Strain Gauge Method,” Materials Research Innovations, V. 15, No. sup1, 2011, pp. 601-604. doi: 10.1179/143307511X1285895767711810.1179/143307511X12858957677118 ↗
21. McGinnis, M. J., and Pessiki, S., “Experimental Study of the Core-Drilling Method for Evaluating In Situ Stresses in Concrete Structures,” Journal of Materials in Civil Engineering, ASCE, V. 28, No. 2, 2016, pp. 1-9. doi: 10.1061/(ASCE)MT.1943-5533.000129410.1061/(ASCE)MT.1943-5533.0001294 ↗
22. Beghini, M.; Bertini, L.; Giri, A.; Santus, C.; and Valentini, E., “Measuring Residual Stress in Finite Thickness Plates Using the Hole-Drilling Method,” Journal of Strain Analysis for Engineering Design, V. 54, No. 1, 2019, pp. 65-75. doi: 10.1177/030932471882183210.1177/0309324718821832 ↗
23. Deng, N. C., and Tang, P. F., “Research on In Situ Stress Measurements in Reinforced Concrete Beams Based on the Core-Drilling Method,” Advances in Civil Engineering, V. 2020, 2020, pp. 1-11. doi: 10.1155/2020/883261410.1155/2020/8832614 ↗
24. Parivallal, S.; Ravisankar, K.; Nagamani, K.; and Kesavan, K., “In Situ Stress Assessment in Concrete Structures under Bi-Axial Condition by Trepanning Technique,” Experimental Techniques, V. 39, No. 4, 2015, pp. 57-63. doi: 10.1111/j.1747-1567.2012.00860.x10.1111/j.1747-1567.2012.00860.x ↗
25. Blödorn, R.; Viotti, M. R.; Schroeter, R. B.; and Albertazzi, A., Jr., “Analysis of Blind-Holes Applied in the Hole-Drilling Method for Residual Stress Measurements,” Experimental Mechanics, V. 55, No. 9, 2015, pp. 1745-1756. doi: 10.1007/s11340-015-0082-510.1007/s11340-015-0082-5 ↗
26. Xu, Z. D.; Zhang, Y.; Li, J. B.; Huang, X. H.; and Guo, Y. Q., “Multi-Step Slotting Method for Evaluating In-Place Stress in Concrete,” ACI Materials Journal, V. 120, No. 5, Sept. 2023, pp. 101-110. doi: 10.14359/5173889310.14359/51738893 ↗
27. Castaneda, D. I., “New Field Testing Procedure for Measuring Residual Stress in Plain Concrete Pavements and Structures,” master’s thesis, University of Illinois Urbana-Champaign, Urbana-Champaign, IL, 2010.