journal article·2017-10-03

Morphology control of a silicon nitride thick film derived from polysilazane precursor using UV curing and IR heat treatment

Cheong Ho Park, Young Jun Joo, Jun Ki Chung, Young Hwan Han, Cheol Jin Kim

Advances in Applied Ceramics· Volume 116· Issue 7
Publisher page

Abstract

Silicon nitride (Si3N4) has excellent thermo-mechanical properties, and can be used as heat dissipation substrate for various devices. Si3N4 thin films are generally synthesised by chemical vapour deposition (CVD) or plasma-enhanced CVD. The use of polysilazanes (PSZs) as a precursor to the synthesis of Si3N4 has attracted significant attention because of their high mouldability and processability. In this study, Si3N4 thick films were prepared on silicon wafers or aluminium substrates by a spin- or dip-coating liquid PSZ, followed by UV curing and IR heat treatment under various conditions. The effects of the heat treatment conditions on the Si3N4 thick film surface were analysed by optical microscopy, X-ray diffraction, and scanning electron microscopy. An almost single phase of Si3N4 was synthesised successfully on the single crystalline silicon with UV curing at 400°C for 30 min and IR heating at 800°C in N2 atmosphere.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Thin-Film Transistor Technologies · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Materials Engineering and Convergence Technology, Gyeongsang National University, Jinju-si, Gyeongsangnam-do, Republic of Korea

Gangwon Science & Technology Promotion Center, Gangneung-si, Gangwon-do, Republic of Korea

International School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, China

Research Institute of Green Energy Convergence Technology, Gyeongsang National University, Jinju-si, Gyeongsangnam-do, Republic of Korea

References (21)

Show source-provided references
1. 10.1016/j.jascer.2015.03.00310.1016/j.jascer.2015.03.003 ↗
2. 10.4191/kcers.2012.49.4.38010.4191/kcers.2012.49.4.380 ↗
3. 10.1016/0022-3697(73)90092-910.1016/0022-3697(73)90092-9 ↗
4. Terry MT. · 2003
5. 10.1016/j.jeurceramsoc.2007.09.01610.1016/j.jeurceramsoc.2007.09.016 ↗
6. 10.3740/MRSK.2007.17.7.36610.3740/MRSK.2007.17.7.366 ↗
7. 10.1016/0040-6090(92)90551-L10.1016/0040-6090(92)90551-L ↗
8. 10.1016/0040-6090(91)90495-J10.1016/0040-6090(91)90495-J ↗
9. 10.1016/0040-6090(80)90092-910.1016/0040-6090(80)90092-9 ↗
10. 10.1021/cr00037a01410.1021/cr00037a014 ↗
11. Kim DP. · Polym Sci Technol · 1997 · 8 · 316
12. 10.1007/BF0270553710.1007/BF02705537 ↗
13. Colombo P. · J Am Ceram Soc · 2010 · 93 · 180510.1111/j.1551-2916.2010.03876.x ↗
14. 10.1111/j.1151-2916.1993.tb03734.x10.1111/j.1151-2916.1993.tb03734.x ↗
15. 10.1007/BF0034997510.1007/BF00349975 ↗
16. 10.1007/BF0110569510.1007/BF01105695 ↗
17. 10.4191/KCERS.2010.47.6.57210.4191/KCERS.2010.47.6.572 ↗
18. 10.1023/A:101794282665710.1023/A:1017942826657 ↗
19. 10.1111/j.1151-2916.1994.tb07043.x10.1111/j.1151-2916.1994.tb07043.x ↗
20. 10.1002/(SICI)1521-396X(199803)166:1<269::AID-PSSA269>3.0.CO;2-710.1002/(SICI)1521-396X(199803)166:1<269::AID-PSSA269>3.0.CO;2-7 ↗
21. 10.1007/BF0239664910.1007/BF02396649 ↗