Characterisation of transparent hydroxyapatite nanoceramics prepared by spark plasma sintering
Source abstract
Abstract
Hydroxyapatites (HA) have good biocompatibility and are used as bioceramics for artificial bones. The application areas can be extended further if transparent and dense HA ceramics can be prepared. The preparation of dense and transparent HA ceramics were attempted using a spark plasma sintering technique at relatively low temperatures (900–1000°C) under a pressure of 80 MPa for a short time of 10 min. The sintered body was almost fully dense (>99%) and transparent with a transmittance >70%. The microstructure was examined by SEM, TEM, STEM and EDX. The HA ceramics exhibited a microstructure with grains, approximately 100 nm size. A number of intragranular voids, 5–10 nm in size, with flat boundaries were also observed. The voids were believed to have been generated by evaporation during spark plasma sintering and were stabilised during cooling. The grain boundaries were clean without a glassy phase.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. Kitsugi T. · Clin. Orthop. · 1988 · 234 · 28010.1097/00003086-198809000-00047 ↗
2. 10.1179/174367606X10227810.1179/174367606X102278 ↗
3. 10.1016/0142-9612(94)90119-810.1016/0142-9612(94)90119-8 ↗
4. Vijayalakshmi U. · Trends Biomater. Artif. Organs. · 2006 · 57
5. John A. · Biomed. Mater. · 2009 · 4
6. Prajatelistia E.
7. 10.1038/2041050a010.1038/2041050a0 ↗
8. 10.1134/1.131293610.1134/1.1312936 ↗