Microstructure development and design in deformation-based metal additive manufacturing
Source abstract
Abstract
Owing to melting and solidification, mainstream fusion-based metal additive manufacturing processes are limited by steep thermal gradients, hot cracking, and columnar grain formation. Deformation-based additive manufacturing offers a different route, wherein metallurgical continuity is implemented through intense plastic deformation. This article examines microstructure development and design in such solid-state approaches, using additive friction stir deposition and cold spray as representative case studies. Although both rely on large deformation, they operate in distinct deformation processing regimes spanning wide ranges of temperature, strain, strain rate, and time scale. We present a unified perspective linking processing conditions to the mechanisms that govern dynamic microstructure and phase evolution, with a highlight of the resulting contrasting microstructural features—refined equiaxed grain structures versus highly nonequilibrium, defect-rich bimodal structures. Building on this foundation, we discuss microstructure design strategies in these deformation-based additive processes along with property optimization opportunities that are inaccessible to their fusion-based counterparts. Graphical abstract
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. W.E. Frazier, J. Mater. Eng. Perform. 23, 1917 (2014)10.1007/s11665-014-0958-z ↗
2. H.Z. Yu, N. Tuncer, Z. Feng, “Introduction and Overview,” in Solid‐State Metal Additive Manufacturing: Physics, Processes, Mechanical Properties, and Applications, ed. by H.Z. Yu, N. Tuncer, Z. Feng (Wiley-VCH, 2024), chap. 1, pp. 1–1810.1002/9783527839353 ↗
3. J.J. Lewandowski, M. Seifi, Annu. Rev. Mater. Res. 46, 151 (2016)10.1146/annurev-matsci-070115-032024 ↗
4. W.J. Sames, F. List, S. Pannala, R.R. Dehoff, S.S. Babu, Int. Mater. Rev. 61, 315 (2016)10.1080/09506608.2015.1116649 ↗
5. N. Tuncer, A. Bose, JOM 72, 3090 (2020)10.1007/s11837-020-04260-y ↗
6. H.Z. Yu, M.E. Jones, G.W. Brady, R.J. Griffiths, D. Garcia, H.A. Rauch, C.D. Cox, N. Hardwick, Scr. Mater. 153, 122 (2018)10.1016/j.scriptamat.2018.03.025 ↗
7. G. Prashar, H. Vasudev, J. Clean. Prod. 310, 127606 (2021)10.1016/j.jclepro.2021.127606 ↗
8. H.Z. Yu, Additive Friction Stir Deposition, 1st edn., Additive Manufacturing Materials and Technologies Series, ed. by M. Qian (Elsevier, 2022)
9. M.E. Perry, R.J. Griffiths, D. Garcia, J.M. Sietins, Y. Zhu, H.Z. Yu, Addit Manuf. 15, 101293 (2020)
10. S. Yin, P. Cavaliere, B. Aldwell, R. Jenkins, H. Liao, W. Li, R. Lupoi, Addit. Manuf. 21, 628 (2018)
11. P. Poza, M.Á. Garrido-Maneiro, Prog. Mater. Sci. 123, 100839 (2022)10.1016/j.pmatsci.2021.100839 ↗
12. A.A. Tiamiyu, C.A. Schuh, Surf. Coat. Technol. 403, 126386 (2020)10.1016/j.surfcoat.2020.126386 ↗
13. H.Z. Yu, G.D. Hahn, Mater. Lett. X 19, 100217 (2023)
14. W. Sun, X. Chu, H. Lan, R. Huang, J. Huang, Y. Xie, J. Huang, G. Huang, J. Therm. Spray Technol. 31, 848 (2022)10.1007/s11666-022-01382-4 ↗
15. R.B. Gottwald, R.J. Griffiths, D.T. Petersen, M.E. Perry, H.Z. Yu, Acc. Mater. Res. 2, 780 (2021)10.1021/accountsmr.1c00098 ↗
16. J. Wei, Y. He, P. Vo, Y. Zou, “Cold Spray in Practical and Potential Applications,” in Solid-State Metal Additive Manufacturing: Physics, Processes, Mechanical Properties, and Applications, ed. by H.Z. Yu, N. Tuncer, Z. Feng (Wiley-VCH, 2024), chap. 5, pp. 101–132. https://doi.org/10.1002/9783527839353.ch510.1002/9783527839353.ch5 ↗
17. W.D. Hartley, D. Garcia, J.K. Yoder, E. Poczatek, J.H. Forsmark, S.G. Luckey, D.A. Dillard, H.Z. Yu, J. Mater. Process. Technol. 291, 117045 (2021)10.1016/j.jmatprotec.2021.117045 ↗
18. R. Ranjan, A.K. Das, Mater. Today. Proc. 56, 768 (2022)10.1016/j.matpr.2022.02.254 ↗
19. R.J. Friel, R.A. Harris, Procedia CIRP 6, 35 (2013)10.1016/j.procir.2013.03.004 ↗
20. M.E. Perry, H.A. Rauch, R.J. Griffiths, D. Garcia, J.M. Sietins, Y. Zhu, Y. Zhu, H.Z. Yu, Materialia 18, 101159 (2021)10.1016/j.mtla.2021.101159 ↗
21. D. Garcia, W.D. Hartley, H.A. Rauch, R.J. Griffiths, R. Wang, Z.J. Kong, Y. Zhu, H.Z. Yu, Addit Manuf. 34, 101386 (2020)
22. N. Gotawala, H.Z. Yu, J. Manuf. Process. 101, 114 (2023)10.1016/j.jmapro.2023.05.095 ↗
23. M. Hassani-Gangaraj, D. Veysset, V.K. Champagne, K.A. Nelson, C.A. Schuh, Acta Mater. 158, 430 (2018)10.1016/j.actamat.2018.07.065 ↗
24. L.N. Brewer, L.I. Perez-Andrade, “Microstructures and Microstructural Evolution in Cold-Sprayed Materials,” in Solid-State Metal Additive Manufacturing: Physics, Processes, Mechanical Properties, and Applications, ed. by H.Z. Yu, N. Tuncer, Z. Feng (Wiley-VCH, 2024), chap. 3, pp. 49–73. https://doi.org/10.1002/9783527839353.ch310.1002/9783527839353.ch3 ↗
25. Y. Ichikawa, K. Ogawa, J. Therm. Spray Technol. 26, 340 (2017)10.1007/s11666-016-0477-6 ↗
26. M. Hassani-Gangaraj, D. Veysset, K.A. Nelson, C.A. Schuh, Supersonic impact of metallic micro-particles (2016), Preprint, arXiv:1612.08081
27. H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye, Acta Mater. 51, 4379 (2003)10.1016/S1359-6454(03)00274-X ↗
28. T. Liu, J.D. Leazer, L.N. Brewer, Acta Mater. 168, 13 (2019)10.1016/j.actamat.2019.01.054 ↗
29. J. Humphreys, G.S. Rohrer, A. Rollett, “The Deformed State,” in Recrystallization and Related Annealing Phenomena, 3rd edn., ed. by J. Humphreys, G.S. Rohrer, A. Rollett (Elsevier, Oxford, 2017), chap. 2, p. 1310.1016/B978-0-08-098235-9.00002-1 ↗
30. U.F. Kocks, H. Mecking, Prog. Mater. Sci. 48, 171 (2003)10.1016/S0079-6425(02)00003-8 ↗
31. M. Kassner, S. Barrabes, Mater. Sci. Eng. A 410, 152 (2005)10.1016/j.msea.2005.08.052 ↗
32. X.H. An, S.D. Wu, Z.G. Wang, Z.F. Zhang, Prog. Mater. Sci. 101, 1 (2019)10.1016/j.pmatsci.2018.11.001 ↗
33. G.T. Gray, Annu. Rev. Mater. Res. 42, 285 (2012)10.1146/annurev-matsci-070511-155034 ↗
34. J.A. Hines, K.S. Vecchio, S. Ahzi, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 29, 191 (1998)10.1007/s11661-998-0172-4 ↗
35. A. Heidarzadeh, S. Mironov, R. Kaibyshev, G. Çam, A. Simar, A. Gerlich, F. Khodabakhshi, A. Mostafaei, D.P. Field, J.D. Robson, A. Deschamps, P.J. Withers, Prog. Mater. Sci. 117, 100752 (2021)10.1016/j.pmatsci.2020.100752 ↗
36. R.J. Griffiths, D. Garcia, J. Song, V.K. Vasudevan, M.A. Steiner, W. Cai, H.Z. Yu, Materialia 15, 100967 (2021)10.1016/j.mtla.2020.100967 ↗
37. S. Gourdet, F. Montheillet, Acta Mater. 51, 2685 (2003)10.1016/S1359-6454(03)00078-8 ↗
38. D. Cram, H.S. Zurob, Y. Brechet, C. Hutchinson, Acta Mater. 57, 5218 (2009)10.1016/j.actamat.2009.07.024 ↗
39. H. Beladi, E. Farabi, P.D. Hodgson, M.R. Barnett, G.S. Rohrer, D. Fabijanic, Philos. Mag. 102, 618 (2022)10.1080/14786435.2021.2011980 ↗
40. P. Agrawal, R.S. Haridas, S. Yadav, S. Thapliyal, A. Dhal, R.S. Mishra, Mater. Charact. 195, 112470 (2023)10.1016/j.matchar.2022.112470 ↗
41. G.D. Hahn, K.P. Knight, N. Gotawala, H.Z. Yu, Mater. Sci. Eng. A 896, 146268 (2024)10.1016/j.msea.2024.146268 ↗
42. C.J.T. Mason, R.I. Rodriguez, D.Z. Avery, B.J. Phillips, B.P. Bernarding, M.B. Williams, S.D. Cobbs, J.B. Jordon, P.G. Allison, Addit. Manuf. 40, 101879 (2021)
43. B.J. Phillips, D.Z. Avery, T. Liu, O.L. Rodriguez, C.J.T. Mason, J.B. Jordon, L.N. Brewer, P.G. Allison, Materialia 7, 100387 (2019)10.1016/j.mtla.2019.100387 ↗
44. Y. Li, M. Zhang, H. Wang, R. Lai, B. Yang, Y. Li, Mater. Sci. Eng. A 887, 145753 (2023)10.1016/j.msea.2023.145753 ↗
45. J.K. Yoder, R.J. Griffiths, H.Z. Yu, Mater. Des. 198, 109288 (2020)10.1016/j.matdes.2020.109288 ↗
46. E. Farabi, S. Babaniaris, M.R. Barnett, D.M. Fabijanic, Addit. Manuf. Lett. 2, 100034 (2022)10.1016/j.addlet.2022.100034 ↗
47. E. Heikkenen, R. Patterson, J. Kincaid, Z. Arwood, P. Metz, D. Penumadu, E.A. Lass, S. Baruah, T. Schmitz, J. Manuf. Process. 151, 400 (2025)10.1016/j.jmapro.2025.07.042 ↗
48. M. Gor, M. Barnett, P. Bhattacharjee, D. Fabijanic, Mater. Sci. Eng. A 945, 149038 (2025)10.1016/j.msea.2025.149038 ↗
49. Y. Zou, Acc. Mater. Res. 2, 1071 (2021)10.1021/accountsmr.1c00138 ↗
50. N. Yan, Z. Li, Y. Xu, M.A. Meyers, Prog. Mater. Sci. 119, 100755 (2021)10.1016/j.pmatsci.2020.100755 ↗
51. M. Grujicic, C.L. Zhao, W.S. DeRosset, D. Helfritch, Mater. Des. 25, 681 (2004)10.1016/j.matdes.2004.03.008 ↗
52. J. Wei, M. Aghasibeig, T. Lyu, Z. Liu, H. Chen, E. Irissou, Y. Zou, Surf. Coat. Technol. 480, 130621 (2024)10.1016/j.surfcoat.2024.130621 ↗
53. X.-T. Luo, C.-X. Li, F.-L. Shang, G.-J. Yang, Y.-Y. Wang, C.-J. Li, Surf. Coat. Technol. 254, 11 (2014)10.1016/j.surfcoat.2014.06.006 ↗
54. Z. Liu, H. Wang, M.J.R. Haché, X. Chu, E. Irissou, Y. Zou, Acta Mater. 193, 191 (2020)10.1016/j.actamat.2020.04.041 ↗
55. Z. Liu, H. Wang, M. Haché, E. Irissou, Y. Zou, Scr. Mater. 177, 96 (2020)10.1016/j.scriptamat.2019.09.018 ↗
56. A. Sabard, T. Hussain, J. Mater. Sci. 54, 12061 (2019)10.1007/s10853-019-03736-w ↗
57. Y. Zou, W. Qin, E. Irissou, J.-G. Legoux, S. Yue, J.A. Szpunar, Scr. Mater. 61, 899 (2009)10.1016/j.scriptamat.2009.07.020 ↗
58. Y. Zou, D. Goldbaum, J.A. Szpunar, S. Yue, Scr. Mater. 62, 395 (2010)10.1016/j.scriptamat.2009.11.034 ↗
59. J. Wei, C. Cojocaru, M. Aghasibeig, C. Shao, Z. Li, J. Zhang, E. Irissou, Y. Zou, Surf. Coat. Technol. 494, 131442 (2024)10.1016/j.surfcoat.2024.131442 ↗
60. N. Qu, J.-M. Lamarre, F. Bernier, S. Song, S.S. Dash, L. Lang, Y. He, Y. Zou, J. Alloys Compd. 1042, 183992 (2025)10.1016/j.jallcom.2025.183992 ↗
61. R. Huang, M. Sone, W. Ma, H. Fukanuma, Surf. Coat. Technol. 261, 278 (2015)10.1016/j.surfcoat.2014.11.017 ↗
62. C. Chen, Y. Xie, X. Yan, S. Yin, H. Fukanuma, R. Huang, R. Zhao, J. Wang, Z. Ren, M. Liu, H. Liao, Addit. Manuf. 27, 595 (2019)
63. R.B. Gottwald, N. Gotawala, D.J. Erb, H.Z. Yu, J. Manuf. Process. 126, 154 (2024)10.1016/j.jmapro.2024.07.076 ↗
64. O.G. Rivera, P.G. Allison, L.N. Brewer, O.L. Rodriguez, J.B. Jordon, T. Liu, W.R. Whittington, R.L. Martens, Z. McClelland, C.J.T. Mason, L. Garcia, J.Q. Su, N. Hardwick, Mater. Sci. Eng. A 724, 547 (2018)10.1016/j.msea.2018.03.088 ↗
65. J.K. Yoder, “Origins of Embrittlement of an Al-Zn-Mg-Cu Alloy Post Additive Friction Stir Deposition,” PhD thesis, Virginia Tech (2023)
66. J.K. Yoder, G.D. Hahn, N. Zhao, R.E. Brennan, K. Cho, H.Z. Yu, Addit. Manuf. Lett. 4, 100108 (2023)10.1016/j.addlet.2022.100108 ↗
67. T. Zhu, Y. Xie, B. Song, C. Chen, R. Zhao, Z. Ren, S. Yin, Mater. Des. 257, 114432 (2025)10.1016/j.matdes.2025.114432 ↗
68. S. Bagherifard, A.H. Astaraee, M. Locati, A. Nawaz, S. Monti, J. Kondás, R. Singh, M. Guagliano, Addit. Manuf. 33, 101131 (2020)
69. C. Chen, Y. Xie, S. Yin, W. Li, X. Luo, X. Xie, R. Zhao, C. Deng, J. Wang, H. Liao, M. Liu, Z. Ren, J. Mater. Sci. Technol. 134, 234 (2023)10.1016/j.jmst.2022.07.003 ↗
70. P. Rambabu, N. Eswara Prasad, V.V. Kutumbarao, R.J.H. Wanhill, “Aluminium Alloys for Aeospace Applications,” in Aerospace Materials and Material Technologies: Volume 1: Aerospace Materials, ed. by N. Eswara Prasad, R.J.H. Wanhill, Indian Institute of Metals Series, ed. by B. Raj, U. Kamachi Mudali (Springer, Singapore, 2016), chap. 2, pp. 29–52
71. S. Suresh, Fatigue of Materials, Cambridge Solid State Science Series (Cambridge University Press, Cambridge, 1998)10.1017/CBO9780511806575 ↗
72. A. Merati, Int. J. Fatigue 27, 33 (2005)10.1016/j.ijfatigue.2004.06.010 ↗
73. G. Lütjering, J. Albrecht, C. Sauer, T. Krull, Mater. Sci. Eng. A 468, 201 (2007)10.1016/j.msea.2006.07.168 ↗
74. K.V. Rao, R. Ritchie, Int. Mater. Rev. 37, 153 (1992)10.1179/imr.1992.37.1.153 ↗
75. G. Patton, C. Rinaldi, Y. Brechet, G. Lormand, R. Fougeres, Mater. Sci. Eng. A 254, 207 (1998)10.1016/S0921-5093(98)00762-X ↗
76. A.G. Gavras, D.A. Lados, V.K. Champagne, R.J. Warren, D. Singh, Metall. Mater. Trans. A 49, 6509 (2018)10.1007/s11661-018-4929-0 ↗
77. A.G. Gavras, D.A. Lados, V.K. Champagne, R.J. Warren, Int. J. Fatigue 110, 49 (2018)10.1016/j.ijfatigue.2018.01.006 ↗
78. B. Yu, J. Tam, W. Li, H.J. Cho, J.G. Legoux, D. Poirier, J.D. Giallonardo, U. Erb, Materialia 7, 100356 (2019)10.1016/j.mtla.2019.100356 ↗
79. A. Moridi, S.M. Hassani-Gangaraj, S. Vezzú, L. Trško, M. Guagliano, Surf. Coat. Technol. 283, 247 (2015)10.1016/j.surfcoat.2015.10.063 ↗
80. P. Cavaliere, A. Silvello, N. Cinca, H. Canales, S. Dosta, I. Garcia Cano, Surf. Coat. Technol. 324, 390 (2017)10.1016/j.surfcoat.2017.06.006 ↗