journal article·2015-02-01Open access

Influence of drying procedure on glass transition temperature of PMMA based nanocomposites

Maria Eriksson, Han Goossens, Ton Peijs

Nanocomposites· Volume 1· Issue 1

Abstract

A literature review of poly(methyl methacrylate) (PMMA) nanocomposites shows inconsistent results regarding the influence of the addition of nanofillers on the mobility of the system. In academic research, solvent based preparation methods are often used to prepare nanocomposites with the aim to obtain a good and controlled dispersion. However, little attention is paid to the influence of the used solvent on the properties of the nanocomposites. We show that in PMMA nanocomposites prepared via solution casting from different solvents, the apparent decrease in glass transition temperature is caused by insufficient drying and that when an adequate drying procedure is used, an increase in glass transition temperature is always observed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer Nanocomposite Synthesis and Irradiation · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory of Polymer MaterialsDepartment of Chemical Engineering and Chemistry, Eindhoven University of Technology, 5600 MB Eindhoven, The Netherlands

Centre for Materials Research & School of Engineering and Materials Science, Queen Mary University of London, Mile End Road, London E1 4NS, UK

References (60)

Show source-provided references
1. 10.1038/nmat187010.1038/nmat1870 ↗
2. 10.1002/polb.2092510.1002/polb.20925 ↗
3. 10.1038/nmat144710.1038/nmat1447 ↗
4. 10.1016/j.polymdegradstab.2007.01.00610.1016/j.polymdegradstab.2007.01.006 ↗
5. 10.1016/j.eurpolymj.2004.04.01110.1016/j.eurpolymj.2004.04.011 ↗
6. 10.1016/j.polymdegradstab.2004.02.00110.1016/j.polymdegradstab.2004.02.001 ↗
7. 10.1002/pola.2437710.1002/pola.24377 ↗
8. 10.1016/j.eurpolymj.2007.05.01110.1016/j.eurpolymj.2007.05.011 ↗
9. 10.1016/j.polymer.2008.10.01810.1016/j.polymer.2008.10.018 ↗
10. 10.1016/j.polymer.2009.08.00710.1016/j.polymer.2009.08.007 ↗
11. 10.1021/ma202218x10.1021/ma202218x ↗
12. 10.1002/polb.2124910.1002/polb.21249 ↗
13. 10.1002/pat.122610.1002/pat.1226 ↗
14. 10.1002/polb.2029710.1002/polb.20297 ↗
15. 10.1021/ma035440010.1021/ma0354400 ↗
16. 10.1103/PhysRevLett.98.16570110.1103/PhysRevLett.98.165701 ↗
17. 10.1002/polb.2118710.1002/polb.21187 ↗
18. 10.1021/la035709910.1021/la0357099 ↗
19. 10.1002/app.2109510.1002/app.21095 ↗
20. 10.1016/j.polymer.2011.12.00110.1016/j.polymer.2011.12.001 ↗
21. 10.1002/app.3859910.1002/app.38599 ↗
22. 10.1016/j.polymer.2010.08.05110.1016/j.polymer.2010.08.051 ↗
23. 10.1016/j.eurpolymj.2011.06.00110.1016/j.eurpolymj.2011.06.001 ↗
24. 10.1021/ma001670s10.1021/ma001670s ↗
25. 10.1016/S0001-8686(01)00060-410.1016/S0001-8686(01)00060-4 ↗
26. 10.1088/0953-8984/17/15/R0110.1088/0953-8984/17/15/R01 ↗
27. 10.1103/PhysRevLett.91.23570110.1103/PhysRevLett.91.235701 ↗
28. Roth CB · Eur. Phys. J. E · 2003 · 12 · S10310.1140/epjed/e2003-01-024-2 ↗
29. 10.1016/j.jelechem.2004.03.00310.1016/j.jelechem.2004.03.003 ↗
30. 10.1039/c2sm25419k10.1039/c2sm25419k ↗
31. 10.1140/epje/i2001-10088-410.1140/epje/i2001-10088-4 ↗
32. 10.1039/fd994980021910.1039/fd9949800219 ↗
33. 10.1021/ma000334910.1021/ma0003349 ↗
34. 10.1021/ma001932q10.1021/ma001932q ↗
35. Labahn D · Phys. Rev. Lett. E · 2009 · 79 · 011801:1
36. 10.1021/ma401527v10.1021/ma401527v ↗
37. 10.1002/(SICI)1521-3935(19980701)199:7<1435::AID-MACP1435>3.0.CO;2-#10.1002/(SICI)1521-3935(19980701)199:7<1435::AID-MACP1435>3.0.CO;2-# ↗
38. 10.1021/la991618t10.1021/la991618t ↗
39. 10.1021/la001125k10.1021/la001125k ↗
40. 10.1016/S0040-6090(03)01353-110.1016/S0040-6090(03)01353-1 ↗
41. 10.1140/epje/i2004-10078-010.1140/epje/i2004-10078-0 ↗
42. Kawana S · Phys. Rev. E · 2001 · 63 · 02150110.1103/PhysRevE.63.021501 ↗
43. 10.1103/PhysRevLett.78.152410.1103/PhysRevLett.78.1524 ↗
44. 10.1002/(SICI)1097-4628(19990628)72:14<1913::AID-APP12>3.0.CO;2-L10.1002/(SICI)1097-4628(19990628)72:14<1913::AID-APP12>3.0.CO;2-L ↗
45. Richardson H · Phys. Rev. E · 2004 · 70 · 051805:110.1103/PhysRevE.70.051805 ↗
46. 10.1007/s00396-007-1733-610.1007/s00396-007-1733-6 ↗
47. 10.1021/ma801878j10.1021/ma801878j ↗
48. 10.1021/ma902168w10.1021/ma902168w ↗
49. 10.1002/adv.2020310.1002/adv.20203 ↗
50. 10.1007/s10853-011-5424-910.1007/s10853-011-5424-9 ↗
51. 10.1016/S0143-7496(97)00001-810.1016/S0143-7496(97)00001-8 ↗
52. 10.1002/macp.20070053410.1002/macp.200700534 ↗
53. Ellison CJ · Phys. Rev. Lett · 2004 · 92 · 095702:1
54. 10.1021/ma100560610.1021/ma1005606 ↗
55. Thomas KR · Phys. Rev. E · 2011 · 83 · 021804:1
56. 10.1021/nn800853y10.1021/nn800853y ↗
57. Raegen A · Phys. Rev. Lett. · 2010 · 105 · 227801:110.1103/PhysRevLett.105.227801 ↗
58. 10.1140/epjst/e2007-00034-x10.1140/epjst/e2007-00034-x ↗
59. 10.1002/(SICI)1097-4628(19990718)73:3<377::AID-APP9>3.0.CO;2-810.1002/(SICI)1097-4628(19990718)73:3<377::AID-APP9>3.0.CO;2-8 ↗
60. Ferguson ML: ‘Preparation and characterization of polym.–SiO2 hybrids’, Oregon State University, Corvallis, OR, USA, 2011.