journal article·2015-02-01Open access

Evaluation of fracture behavior of polyethylene/CaCO3nanocomposite using essential work of fracture (EWF) approach

Meymanat S. Mohsenzadeh, Mohammad Mazinani, Seyed Mojtaba Zebarjad

Nanocomposites· Volume 1· Issue 1

Abstract

The fracture behavior of two series of polyethylene (PE) films, both the unreinforced and reinforced with different amounts of nanoscale calcium carbonate (CaCO3) particles was investigated in this research work by means of the essential work of fracture (EWF) approach under the loading condition of mode I. For this purpose, EWF test was conducted on deeply double edge notched tension (DDENT) specimens; and the essential and non-essential components of fracture work, were estimated using the plots representing the variation of the specific total work of fracture (wf) versus the ligament length of the specimen. The results showed that the crack resistance for the PE/CaCO3 nanocomposites was lower than that of the unreinforced PE, and for the case of nanocomposite samples, the total plastic energy absorbed during fracture increased with increasing CaCO3 content up to 2·5 wt-% and then decreased for nanocomposite samples containing 5 wt-%CaCO3. The plastic zone size decreased with increasing CaCO3 content, whereas the specific plastic work per unit volume increased with increasing weight percent CaCO3. The observed trends were rationalized using the fracture and deformation mechanisms of nanocomposites.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Polymer crystallization and properties · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials EngineeringFaculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran

Department of Materials EngineeringFaculty of Engineering, Shiraz University, Shiraz, Iran

References (31)

Show source-provided references
1. 10.1016/S0032-3861(98)00444-310.1016/S0032-3861(98)00444-3 ↗
2. 10.1016/S0032-3861(02)00193-310.1016/S0032-3861(02)00193-3 ↗
3. 10.1016/S0032-3861(02)00769-310.1016/S0032-3861(02)00769-3 ↗
4. 10.1016/S0032-3861(02)00120-910.1016/S0032-3861(02)00120-9 ↗
5. Rothon RN: ‘Particulate-filled polymer composites’; 2003, Shrewsbury, Rapra Technology Limited.
6. 10.1002/vnl.1001110.1002/vnl.10011 ↗
7. 10.1016/j.polymer.2004.11.11110.1016/j.polymer.2004.11.111 ↗
8. 10.1002/pc.75010010610.1002/pc.750100106 ↗
9. ‘Plastics. Determination of fracture toughness (GIc and KIc) – linear elastic fracture mechanics (LEFM) Approach’, ISO 13586, ISO, Geneva, Switzerland, 2000.
10. 10.1016/j.progpolymsci.2010.07.00110.1016/j.progpolymsci.2010.07.001 ↗
11. 10.1016/j.engfracmech.2006.04.01110.1016/j.engfracmech.2006.04.011 ↗
12. 10.1016/S0032-3861(00)00163-410.1016/S0032-3861(00)00163-4 ↗
13. 10.1016/S0266-3538(02)00140-910.1016/S0266-3538(02)00140-9 ↗
14. 10.1016/j.polymertesting.2005.02.00410.1016/j.polymertesting.2005.02.004 ↗
15. 10.1016/j.polymertesting.2005.09.01010.1016/j.polymertesting.2005.09.010 ↗
16. 10.1016/j.compscitech.2006.01.03610.1016/j.compscitech.2006.01.036 ↗
17. 10.1016/j.compscitech.2005.06.00810.1016/j.compscitech.2005.06.008 ↗
18. 10.1016/j.compscitech.2006.08.00610.1016/j.compscitech.2006.08.006 ↗
19. 10.1016/0022-5096(75)90017-410.1016/0022-5096(75)90017-4 ↗
20. Cotterell B · Int. J. Fract. · 1977 · 13 · 26710.1007/BF00040143 ↗
21. 10.1007/BF0001978710.1007/BF00019787 ↗
22. 10.1080/15685543.2013.80714510.1080/15685543.2013.807145 ↗
23. 10.3144/expresspolymlett.2013.6210.3144/expresspolymlett.2013.62 ↗
24. 10.1002/app.3900410.1002/app.39004 ↗
25. 10.1002/app.4044710.1002/app.40447 ↗
26. 10.1177/073168441350578710.1177/0731684413505787 ↗
27. Clutton E: ‘Essential work of fracture’, in ‘Fracture machanics testing methods for polymers’. (ed. D. R. Mooret al.), Vol. 28, 177; 2001, Amsterdam, ESIS Publication.10.1016/S1566-1369(01)80033-9 ↗
28. 10.1016/S0032-3861(00)00603-010.1016/S0032-3861(00)00603-0 ↗
29. 10.1016/S0032-3861(02)00102-710.1016/S0032-3861(02)00102-7 ↗
30. 10.1016/S0032-3861(99)00216-510.1016/S0032-3861(99)00216-5 ↗
31. 10.1016/S0032-3861(98)00169-410.1016/S0032-3861(98)00169-4 ↗