journal article·2019-02-17Open access

Dense and strong ZrO 2 ceramics fully densified in <15 min

Duan Li, Yongsheng Liu, Yuan Zhong, Leifeng Liu, Erik Adolfsson, Zhijian Shen

Advances in Applied Ceramics· Volume 118· Issue 1-2

Abstract

Crack-free zirconia ceramics were consolidated via sintering by intense thermal radiation (SITR) approach at 1600–1700°C for 3–5 min. The resulted ceramic bulks can achieve a relative density up to 99.6% with a grain size of 300–1200 nm. Their bending strength, Vickers hardness and indentation toughness values are up to 1244 ± 139 MPa, 13.3 ± 0.3 GPa and 5.5 ± 0.1 MPa m1/2, respectively. Quantitative Raman and XRD analysis show the presence of minor m phase on the natural surface (&lt;7%), fracture surface (&lt;10%) and indentation areas (&lt;15%). It reveals that the SITR method is efficient for rapidly manufacturing zirconia ceramics with desired density, fine grained microstructure and good mechanical properties that are strongly demanded in dental applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials and Environmental Chemistry, Arrhenius Laboratory, Stockholm University, Stockholm, Sweden

Science and Technology on Advanced Ceramic Fibers and Composites Laboratory, National University of Defense Technology, Changsha, People’s Republic of China

Science and Technology on Thermostructure Composite Materials Laboratory, Northwestern Polytechnical University, Xi’an, People’s Republic of China

Swerea IVF, Mölndal, Sweden

Funding

Vetenskapsrådet · European Commission · FP7 People: Marie-Curie Actions

References (32)

Show source-provided references
1. 10.1038/258703a010.1038/258703a0 ↗
2. 10.1111/j.1151-2916.2000.tb01221.x10.1111/j.1151-2916.2000.tb01221.x ↗
3. 10.1016/j.actamat.2014.12.03210.1016/j.actamat.2014.12.032 ↗
4. 10.1016/S0079-6425(00)00005-010.1016/S0079-6425(00)00005-0 ↗
5. 10.1111/j.1551-2916.2009.03278.x10.1111/j.1551-2916.2009.03278.x ↗
6. 10.1016/j.actamat.2014.07.05310.1016/j.actamat.2014.07.053 ↗
7. 10.1016/j.jeurceramsoc.2014.10.02310.1016/j.jeurceramsoc.2014.10.023 ↗
8. 10.3390/ma302080010.3390/ma3020800 ↗
9. 10.1016/j.jeurceramsoc.2014.10.02210.1016/j.jeurceramsoc.2014.10.022 ↗
10. 10.1016/S0142-9612(98)00010-610.1016/S0142-9612(98)00010-6 ↗
11. 10.1016/j.dental.2005.12.00810.1016/j.dental.2005.12.008 ↗
12. Filser F · Int J Comput Dent · 2001 · 4 · 89
13. 10.1179/174367508X29781210.1179/174367508X297812 ↗
14. 10.1016/j.jeurceramsoc.2013.06.00410.1016/j.jeurceramsoc.2013.06.004 ↗
15. 10.1111/j.1551-2916.2007.01781.x10.1111/j.1551-2916.2007.01781.x ↗
16. 10.1179/174367608X31884410.1179/174367608X318844 ↗
17. 10.1016/j.actamat.2007.01.04810.1016/j.actamat.2007.01.048 ↗
18. 10.1016/j.jeurceramsoc.2014.12.02710.1016/j.jeurceramsoc.2014.12.027 ↗
19. 10.1088/1468-6996/15/4/04500310.1088/1468-6996/15/4/045003 ↗
20. 10.1016/j.jeurceramsoc.2015.03.02110.1016/j.jeurceramsoc.2015.03.021 ↗
21. 10.1039/C5RA00766F10.1039/C5RA00766F ↗
22. 10.1111/jace.1392610.1111/jace.13926 ↗
23. 10.1016/j.scriptamat.2012.02.01310.1016/j.scriptamat.2012.02.013 ↗
24. 10.1111/j.1151-2916.1972.tb11290.x10.1111/j.1151-2916.1972.tb11290.x ↗
25. 10.1006/jssc.1994.116010.1006/jssc.1994.1160 ↗
26. 10.1111/j.1151-2916.1984.tb19715.x10.1111/j.1151-2916.1984.tb19715.x ↗
27. 10.1023/A:101858782126010.1023/A:1018587821260 ↗
28. 10.1006/jssc.1999.856510.1006/jssc.1999.8565 ↗
29. 10.1016/S1359-6454(02)00283-510.1016/S1359-6454(02)00283-5 ↗
30. 10.1007/BF0072470610.1007/BF00724706 ↗
31. Howell JR · 2011
32. 10.1108/1355254131129273610.1108/13552541311292736 ↗