journal article·2021-11-17

Cold spray for ceramic metallisation: a review

Chao Han, Zhizhong Wang, Li Ma, Bojiang Ma, Guosheng Huang, Yingxiang Ma

Advances in Applied Ceramics· Volume 120· Issue 5-8
Publisher page

Abstract

Since invented in 1980s, cold spraying (CS) has received numerous attentions recently because of its low heat input and high efficiency. Severe plastic deformation induced by high-velocity impaction makes the particles with temperature below the melting point deposited on the substrate. Theoretically, the coating obtained by CS is dense and free of oxidation, so excellent thermal and electrical conductivity can be obtained, which is ideal for ceramic metallisation (CM). Many studies have been done on the CS CM to study the coating structures, bonding mechanism and performances. Mechanical occlusion is considered to be the main bonding type at the interface, local melting plays a small role in the bonding, but local melting improves the bonding strength significantly. However, the specific bonding mechanism of CS CM is still unclear, especially in some metal/ceramic systems with bonding strength greater than 10 MPa, the bonding mechanisms need to be further studied. CS is also difficult to metallise some ceramics, which requires complicated design. Thus, aiming to improve the reliability and the extent of the application of CS CM, a thorough review should be made. In the present paper, the bonding mechanisms of CS metal coating on ceramic proposed by previous researches were summarised to help the researchers a better and quicker understanding for the CS CM. The factors influencing the properties were introduced. The author also made an outlook for the future development of CS in CM.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical and Electrical Engineering, Qingdao University of Science and Technology, Qingdao, People’s Republic of China

State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Qingdao, People’s Republic of China

School of Materials Science and Engineering, China University of Petroleum (East China), Qingdao, People’s Republic of China

School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, People’s Republic of China

Funding

State Key Laboratory for Marine Corrosion and Protection

References (100+)

Show source-provided references
1. 10.1016/j.msea.2018.05.02010.1016/j.msea.2018.05.020 ↗
2. 10.1557/JMR.2000.032110.1557/JMR.2000.0321 ↗
3. 10.1016/j.mseb.2012.05.01510.1016/j.mseb.2012.05.015 ↗
4. 10.1016/j.ceramint.2016.03.04410.1016/j.ceramint.2016.03.044 ↗
5. Chen DQ · Mater Rev · 2004 · 18 · 76
6. Gao LQ · Shandong Ceramics · 2019 · 42 · 7
7. 10.1016/j.surfin.2017.12.00710.1016/j.surfin.2017.12.007 ↗
8. Alkhimov AP, Papyrin AN, Kosarev VF, et al. Gas-dynamic spraying method for applying a coating. United States patent US 5302414. 1994; US5302414A.
9. 10.1016/j.surfcoat.2010.06.02010.1016/j.surfcoat.2010.06.020 ↗
10. 10.1361/105996306X10797710.1361/105996306X107977 ↗
11. 10.1016/j.vacuum.2011.06.02610.1016/j.vacuum.2011.06.026 ↗
12. 10.1007/s11666-010-9541-910.1007/s11666-010-9541-9 ↗
13. Alkhimov AP, Kosarev VF, Papyrin AN. A method of cold gas-dynamic deposition. Transl. American Institute of Physics. 1990;35(12):1047–1049. US5769A.
14. Papyrin A. · Adv Mater Processes · 2001 · 159 · 49
15. 10.1016/S0257-8972(98)00709-910.1016/S0257-8972(98)00709-9 ↗
16. 10.1361/10599639977035025010.1361/105996399770350250 ↗
17. 10.1007/s11666-011-9662-910.1007/s11666-011-9662-9 ↗
18. 10.1007/s11666-013-9951-610.1007/s11666-013-9951-6 ↗
19. 10.1016/S1359-6454(03)00274-X10.1016/S1359-6454(03)00274-X ↗
20. 10.1016/0749-6419(92)90032-810.1016/0749-6419(92)90032-8 ↗
21. 10.1016/j.jeurceramsoc.2013.08.02210.1016/j.jeurceramsoc.2013.08.022 ↗
22. McCune RC, Donlon WT, Cartwright EL, et al. Characterization of copper and steel coatings made by the cold-gas-dynamic spray method. Proceedings of 9th NTSC; 1996. p. 397.10.31399/asm.cp.itsc1996p0397 ↗
23. 10.1016/0924-0136(95)01906-510.1016/0924-0136(95)01906-5 ↗
24. 10.1361/1059963041935510.1361/10599630419355 ↗
25. Drehmann R · J Therm Spray Technol · 2013 · 23 · 68
26. 10.1016/j.surfcoat.2009.03.05410.1016/j.surfcoat.2009.03.054 ↗
27. 10.1007/s11666-018-0718-y10.1007/s11666-018-0718-y ↗
28. 10.1016/j.surfcoat.2010.08.08410.1016/j.surfcoat.2010.08.084 ↗
29. Maev RG · Wiley-VCH · 2008 · 2 · 85
30. Donner KR, Gaertner F, Klassen T. (2017). Metallizat essential factors influencing the bonding strength of cold- sprayed aluminum coatings on ceramic substrates.
31. Gärtner F
32. 10.1002/adem.20110026110.1002/adem.201100261 ↗
33. Drehmann R · J Therm Spray Technol · 2015 · 24 · 92
34. Papyrin AN · 2002 · 380
35. 10.1016/j.matdes.2004.03.00810.1016/j.matdes.2004.03.008 ↗
36. 10.1016/j.surfcoat.2004.10.06310.1016/j.surfcoat.2004.10.063 ↗
37. 10.1361/105996306X10829110.1361/105996306X108291 ↗
38. 10.1361/1059963052273810.1361/10599630522738 ↗
39. 10.1016/j.actamat.2008.07.03410.1016/j.actamat.2008.07.034 ↗
40. 10.1016/j.actamat.2017.02.02110.1016/j.actamat.2017.02.021 ↗
41. 10.1016/j.actamat.2008.06.00310.1016/j.actamat.2008.06.003 ↗
42. 10.1016/j.matlet.2016.03.13210.1016/j.matlet.2016.03.132 ↗
43. 10.1016/j.matlet.2014.07.14210.1016/j.matlet.2014.07.142 ↗
44. 10.1016/S0257-8972(02)00018-X10.1016/S0257-8972(02)00018-X ↗
45. Zhang D, Shipway PH, Mccartney DG. Particle-substrate interactions in cold gas dynamic spraying. In: Thermal spray advancing the science & applying the technology; 2003.10.31399/asm.cp.itsc2003p0045 ↗
46. Mäkinen H · Therm Spray Technol · 2007 · 31
47. Atin S · Acta Mater · 2006 · 54 · 59
48. 10.1016/j.actamat.2006.09.00610.1016/j.actamat.2006.09.006 ↗
49. 10.1016/j.surfcoat.2012.01.03110.1016/j.surfcoat.2012.01.031 ↗
50. 10.1007/s11666-007-9086-810.1007/s11666-007-9086-8 ↗
51. 10.1007/s11666-010-9571-310.1007/s11666-010-9571-3 ↗
52. 10.1016/j.surfcoat.2014.07.07410.1016/j.surfcoat.2014.07.074 ↗
53. 10.1016/j.surfcoat.2008.06.17110.1016/j.surfcoat.2008.06.171 ↗
54. Maurice J · Energy Procedia · 2014 · 55 · 342
55. 10.1016/j.apsusc.2005.03.14810.1016/j.apsusc.2005.03.148 ↗
56. 10.1361/10599639877035094510.1361/105996398770350945 ↗
57. 10.1361/10599630277034868210.1361/105996302770348682 ↗
58. Stoltenhoff T, Voyer J, Kreye H. CS-state of the art and applicability kaltgasspritzen -stand der technik und anwendungsmöglichkeiten. International Thermal Spray Conference-ITSC; 2002. p. 366–374.10.31399/asm.cp.itsc2002p0366 ↗
59. 10.1361/10599630377034838410.1361/105996303770348384 ↗
60. Stoltenhoff T, Voyer J, Kreye H. Cold spraying-state of the art and applicability. Thermal Spray. 2002:366–374.10.31399/asm.cp.itsc2002p0366 ↗
61. 10.1016/j.surfcoat.2014.04.03910.1016/j.surfcoat.2014.04.039 ↗
62. 10.1016/j.surfcoat.2005.02.20910.1016/j.surfcoat.2005.02.209 ↗
63. 10.1016/j.msea.2003.10.31210.1016/j.msea.2003.10.312 ↗
64. 10.1016/j.surfcoat.2006.04.03510.1016/j.surfcoat.2006.04.035 ↗
65. 10.1007/s11666-018-0743-x10.1007/s11666-018-0743-x ↗
66. Lu YP · Vac Sci Technol · 2000 · 3 · 190
67. 10.1016/j.actamat.2005.10.00510.1016/j.actamat.2005.10.005 ↗
68. 10.1016/j.apsusc.2011.03.12610.1016/j.apsusc.2011.03.126 ↗
69. 10.1361/105996306X10817410.1361/105996306X108174 ↗
70. 10.1361/105996306X10821910.1361/105996306X108219 ↗
71. 10.1016/j.surfcoat.2008.04.03410.1016/j.surfcoat.2008.04.034 ↗
72. 10.1016/j.surfcoat.2009.03.05410.1016/j.surfcoat.2009.03.054 ↗
73. 10.1007/s11666-009-9298-110.1007/s11666-009-9298-1 ↗
74. 10.1007/s00170-011-3642-610.1007/s00170-011-3642-6 ↗
75. 10.1007/s11666-018-0718-y10.1007/s11666-018-0718-y ↗
76. 10.1361/105996306X10811010.1361/105996306X108110 ↗
77. 10.1007/s11666-012-9803-910.1007/s11666-012-9803-9 ↗
78. 10.1016/j.surfcoat.2015.02.04810.1016/j.surfcoat.2015.02.048 ↗
79. 10.1016/j.surfcoat.2012.04.08110.1016/j.surfcoat.2012.04.081 ↗
80. 10.1016/j.surfcoat.2014.11.00910.1016/j.surfcoat.2014.11.009 ↗
81. 10.1007/s10853-015-9304-610.1007/s10853-015-9304-6 ↗
82. 10.1007/s11666-015-0312-510.1007/s11666-015-0312-5 ↗
83. Watanabe Y · J Therm Spray Technol · 2014 · 24 · 86
84. 10.1007/s11666-012-9871-x10.1007/s11666-012-9871-x ↗
85. 10.1007/s11666-007-9082-z10.1007/s11666-007-9082-z ↗
86. Irissou E · 2008
87. 10.1007/s11666-011-9623-310.1007/s11666-011-9623-3 ↗
88. 10.1016/j.ast.2005.03.00510.1016/j.ast.2005.03.005 ↗
89. 10.1361/105996306X14714410.1361/105996306X147144 ↗
90. Zhang D · 2003 · 45
91. 10.1007/s11666-010-9568-y10.1007/s11666-010-9568-y ↗
92. 10.1007/s11666-011-9720-310.1007/s11666-011-9720-3 ↗
93. 10.1007/s11666-007-9091-y10.1007/s11666-007-9091-y ↗
94. 10.1007/s11666-007-9121-910.1007/s11666-007-9121-9 ↗
95. 10.1361/1059963041967010.1361/10599630419670 ↗
96. 10.1016/S0040-6090(01)00769-610.1016/S0040-6090(01)00769-6 ↗
97. Li C · Thermal Spray · 1998 · 385 · 132
98. 10.1016/j.surfcoat.2003.10.04810.1016/j.surfcoat.2003.10.048 ↗
99. 10.1016/j.surfcoat.2006.07.18410.1016/j.surfcoat.2006.07.184 ↗
100. 10.1179/174329406X15044010.1179/174329406X150440 ↗