Dual Interlocked Mediators Enable Single-Ion-Conducting Quasi-Solid-State Electrolytes for Ultrafast-Charging Long-Life Sodium Metal Batteries
Source abstract
Abstract
Abstract Quasi-solid-state electrolytes (QSEs) are critical for ultrafast-charging yet high-safety sodium metal batteries (SMBs), yet their implementation is hindered by sluggish Na + transport in bulk and at interfaces. Here, we propose dual interlocked mediator engineering that transcends conventional independent approaches by coupling cationic Sn 2+ salt with anionic difluoro(oxalato)borate (DFOB⁻) salts to simultaneously regulating bulk ion transport and bilateral interface chemistry. During QSE preparation, Sn 2+ initiates in situ cationic polymerization, while DFOB⁻ acts as a retarding agent to suppress runaway polymerization. The first interlocking effect in the Sn-FB QSE bulk builds a uniform network, enabling near-unity Na + transference number (0.94) and robust puncture strength (8.5 kPa). During cell operation, Sn 2+ is reduced to form a hybrid NaSn alloy-based solid-electrolyte interphase, while DFOB⁻ oxidizes to generate a robust yet thin cathode–electrolyte interphase, respectively. This second interlocking effect creates adaptable bilateral interphases that facilitate Na + diffusion and mitigate interfacial degradation. As a result, the symmetric cells exhibit 6000 h stability, and full cells retain 80.1 mAh g –1 at an ultrafast-charging rate of 15C and retain 90% capacity at 3C over 2000 cycles. Furthermore, high-mass-loading full cells and pressure-free pouch cells are demonstrated, underscoring the potential of dual interlocked mediator engineering for practical SMBs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Thermal Expansion and Ionic Conductivity · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. X. Liu, X. Dong, H. Adenusi, Y. Wu, S. Passerini, Co-solvent strategy for rechargeable post-lithium metal batteries. Nat. Rev. Chem. 9(6), 415–426 (2025). https://doi.org/10.1038/s41570-025-00714-610.1038/s41570-025-00714-6 ↗
2. W. Li, Y. Zhai, S. Gong, Y. Zhou, Q. Xia et al., Electrochemical solid-state electrolyte reactors: configurations, applications, and future prospects. Nano-Micro Lett. 17(1), 306 (2025). https://doi.org/10.1007/s40820-025-01824-y10.1007/s40820-025-01824-y ↗
3. Y. Gao, Q. Yu, H. Yang, J. Zhang, W. Wang, The enormous potential of sodium/potassium-ion batteries as the mainstream energy storage technology for large-scale commercial applications. Adv. Mater. 36(39), 2405989 (2024). https://doi.org/10.1002/adma.20240598910.1002/adma.202405989 ↗
4. J.-X. Guo, C. Gao, Y.-F. Du, F. Jiang, N.-L. Shen et al., Thermoresponsive mono-solvent electrolyte inhibiting parasitic reactions for safe lithium metal batteries. Adv. Energy Mater. 15(28), 2500703 (2025). https://doi.org/10.1002/aenm.20250070310.1002/aenm.202500703 ↗
5. F. Jiang, Y.-F. Du, J.-X. Guo, N.-L. Shen, Z.-X. Chen et al., Thermoresponsive solid electrolyte interphase enables safe lithium–sulfur batteries with high energy density. Energy Environ. Sci. 18(10), 4925–4933 (2025). https://doi.org/10.1039/d5ee00412h10.1039/d5ee00412h ↗
6. A. Yao, S.M. Benson, W.C. Chueh, Critically assessing sodium-ion technology roadmaps and scenarios for techno-economic competitiveness against lithium-ion batteries. Nat. Energy 10(3), 404–416 (2025). https://doi.org/10.1038/s41560-024-01701-910.1038/s41560-024-01701-9 ↗
7. F. Sun, L. Wei, J. Zhang, N. Yu, M. Wu et al., Research progress and evaluation methods of lithium-ion battery fast-charge graphite anode material. Energy Storage Sci. Technol. 6, 1223–1230 (2017). https://doi.org/10.12028/j.issn.2095-4239.2017.009810.12028/j.issn.2095-4239.2017.0098 ↗
8. S. Tang, W. Guo, Y. Fu, Advances in composite polymer electrolytes for lithium batteries and beyond. Adv. Energy Mater. 11(2), 2000802 (2021). https://doi.org/10.1002/aenm.20200080210.1002/aenm.202000802 ↗
9. X. Wu, X. Lan, R. Hu, Y. Yao, Y. Yu et al., Tin-based anode materials for stable sodium storage: progress and perspective. Adv. Mater. 34(7), e2106895 (2022). https://doi.org/10.1002/adma.20210689510.1002/adma.202106895 ↗
10. Y. Liu, H. Mao, R. Bai, S. Weng, Q. Zhang et al., Designing an isotropic epilayer for stable 4.2 V solid-state Na batteries. Nat. Energy 10(11), 1305–1314 (2025). https://doi.org/10.1038/s41560-025-01857-y10.1038/s41560-025-01857-y ↗
11. G. Deysher, J.A.S. Oh, Y.-T. Chen, B. Sayahpour, S.-Y. Ham et al., Design principles for enabling an anode-free sodium all-solid-state battery. Nat. Energy 9, 1161–1172 (2024). https://doi.org/10.1038/s41560-024-01569-910.1038/s41560-024-01569-9 ↗
12. F. Huang, P. Xu, G. Fang, S. Liang, In-depth understanding of interfacial Na+ behaviors in sodium metal anode: migration, desolvation, and deposition. Adv. Mater. 36(41), 2405310 (2024). https://doi.org/10.1002/adma.20240531010.1002/adma.202405310 ↗
13. X. Chen, C. Qin, F. Chu, F. Li, J. Liu et al., Contriving a gel polymer electrolyte to drive quasi-solid-state high-voltage Li metal batteries at ultralow temperatures. Energy Environ. Sci. 18(2), 910–922 (2025). https://doi.org/10.1039/d4ee04011b10.1039/d4ee04011b ↗
14. G. Liu, J. Yang, J. Wu, Z. Peng, X. Yao, Inorganic Sodium solid electrolytes: structure design, interface engineering and application. Adv. Mater. 36(37), e2311475 (2024). https://doi.org/10.1002/adma.20231147510.1002/adma.202311475 ↗
15. Y. Sun, J.-C. Li, H. Zhou, S. Guo, Wide-temperature-range sodium-metal batteries: from fundamentals and obstacles to optimization. Energy Environ. Sci. 16(11), 4759–4811 (2023). https://doi.org/10.1039/d3ee02082g10.1039/d3ee02082g ↗
16. C. Shan, Y. Wang, M. Liang, K. Lu, C. Xiong et al., A comprehensive review of single ion-conducting polymer electrolytes as a key component of Lithium metal batteries: from structural design to applications. Energy Storage Mater. 63, 102955 (2023). https://doi.org/10.1016/j.ensm.2023.10295510.1016/j.ensm.2023.102955 ↗
17. X. Shan, Z. Song, H. Ding, L. Li, Y. Tian et al., Polymer electrolytes with high cation transport number for rechargeable Li–metal batteries: current status and future direction. Energy Environ. Sci. 17(22), 8457–8481 (2024). https://doi.org/10.1039/d4ee03097d10.1039/d4ee03097d ↗
18. S. Lou, F. Zhang, C. Fu, M. Chen, Y. Ma et al., Interface issues and challenges in all-solid-state batteries: Lithium, Sodium, and beyond. Adv. Mater. 33(6), 2000721 (2021). https://doi.org/10.1002/adma.20200072110.1002/adma.202000721 ↗
19. Y. Zhang, Y. You, R. Hu, R. Wang, Y. Su et al., Identifying the tri-roles of anion vacancy on improving K-ion storage. Mater. Rep. Energy 5(3), 100351 (2025). https://doi.org/10.1016/j.matre.2025.10035110.1016/j.matre.2025.100351 ↗
20. J. Yin, Y.S. Zhang, H. Liang, W. Zhang, Y. Zhu, Synthesis strategies of hard carbon anodes for Sodium-ion batteries. Mater. Rep. Energy 4(2), 100268 (2024). https://doi.org/10.1016/j.matre.2024.10026810.1016/j.matre.2024.100268 ↗
21. M. Lao, Y. Zhang, W. Luo, Q. Yan, W. Sun et al., Alloy-based anode materials toward advanced Sodium-ion batteries. Adv. Mater. 29(48), 1700622 (2017). https://doi.org/10.1002/adma.20170062210.1002/adma.201700622 ↗
22. Z. Hui, S. Yu, S. Wang, G. Hyun, J. Holoubek et al., Nucleation processes at interfaces with both substrate and electrolyte control Lithium growth. Nat. Chem. 18(1), 33–42 (2026). https://doi.org/10.1038/s41557-025-01911-y10.1038/s41557-025-01911-y ↗
23. T. Wang, B. Chen, Y. Liu, Z. Song, Z. Wang et al., Fatigue of Li metal anode in solid-state batteries. Science 388(6744), 311–316 (2025). https://doi.org/10.1126/science.adq680710.1126/science.adq6807 ↗
24. Q. Liu, L. Zhang, H. Sun, L. Geng, Y. Li et al., In situ observation of sodium dendrite growth and concurrent mechanical property measurements using an environmental transmission electron microscopy–atomic force microscopy (ETEM-AFM) platform. ACS Energy Lett. 5(8), 2546–2559 (2020). https://doi.org/10.1021/acsenergylett.0c0121410.1021/acsenergylett.0c01214 ↗
25. L. Wang, N. Ren, W. Jiang, H. Yang, S. Ye et al., Tailoring Na+ solvation environment and electrode-electrolyte interphases with Sn(OTf)2 additive in non-flammable phosphate electrolytes towards safe and efficient Na-S batteries. Angew. Chem. Int. Ed. 63(12), e202320060 (2024). https://doi.org/10.1002/anie.20232006010.1002/anie.202320060 ↗
26. S. Zhang, B. Xie, X. Zhuang, S. Wang, L. Qiao et al., Great challenges and new paradigm of the in situ polymerization technology inside lithium batteries. Adv. Funct. Mater. 34(17), 2314063 (2024). https://doi.org/10.1002/adfm.20231406310.1002/adfm.202314063 ↗
27. S. Zou, Y. Yang, J. Wang, X. Zhou, X. Wan et al., In situ polymerization of solid-state polymer electrolytes for lithium metal batteries: a review. Energy Environ. Sci. 17(13), 4426–4460 (2024). https://doi.org/10.1039/d4ee00822g10.1039/d4ee00822g ↗
28. H. An, M. Li, Q. Liu, Y. Song, B. Deng et al., Hybrid electrolyte enables solid-state sodium batteries sustaining 50,000 cycles. Nat. Sustain. 8(6), 661–671 (2025). https://doi.org/10.1038/s41893-025-01544-610.1038/s41893-025-01544-6 ↗
29. M. Bai, X. Tang, M. Zhang, H. Wang, Z. Wang et al., An in-situ polymerization strategy for gel polymer electrolyte Si||Ni-rich lithium-ion batteries. Nat. Commun. 15(1), 5375 (2024). https://doi.org/10.1038/s41467-024-49713-z10.1038/s41467-024-49713-z ↗
30. J. Li, J. Chen, X. Xu, J. Shen, Z. Wang et al., Developing quasi-solid-state ether-based electrolytes with trifluorotoluylation ionic liquids for high voltage lithium metal batteries. Adv. Mater. 37(28), 2501006 (2025). https://doi.org/10.1002/adma.20250100610.1002/adma.202501006 ↗
31. Q. Liu, Y. Sun, S. Wang, Q. An, L. Duan et al., Highly adaptable SEI/CEI interfacial layers enabling remarkable performance of high-nickel solid-state batteries. Mater. Today 64, 21–30 (2023). https://doi.org/10.1016/j.mattod.2023.02.01110.1016/j.mattod.2023.02.011 ↗
32. C. Lei, T. Zhou, M. Zhang, T. Liu, C. Xu et al., Universal copolymerization of crosslinked polyether electrolytes for all-solid-state lithium-metal batteries. Adv. Sci. 11(36), 2405482 (2024). https://doi.org/10.1002/advs.20240548210.1002/advs.202405482 ↗
33. J. Zheng, W. Zhang, C. Huang, Z. Shen, X. Wang et al., In-situ polymerization with dual-function electrolyte additive toward future lithium metal batteries. Mater. Today Energy 26, 100984 (2022). https://doi.org/10.1016/j.mtener.2022.10098410.1016/j.mtener.2022.100984 ↗
34. H. Yang, M. Jing, L. Wang, H. Xu, X. Yan et al., PDOL-based solid electrolyte toward practical application: opportunities and challenges. Nano-Micro Lett. 16(1), 127 (2024). https://doi.org/10.1007/s40820-024-01354-z10.1007/s40820-024-01354-z ↗
35. J. Zheng, L. Duan, H. Ma, Q. An, Q. Liu et al., Leveraging polymer architecture design with acylamino functionalization for electrolytes to enable highly durable lithium metal batteries. Energy Environ. Sci. 17(18), 6739–6754 (2024). https://doi.org/10.1039/d4ee02218a10.1039/d4ee02218a ↗
36. S. Liu, B. Wu, S. Huang, Z. Lin, H. Song et al., Controllable in situ polymerization of 1, 3-dioxolane via sustained-release effect for solid-state lithium metal batteries. Adv. Energy Mater. 15(4), 2402848 (2025). https://doi.org/10.1002/aenm.20240284810.1002/aenm.202402848 ↗
37. X. Liu, L. Guo, Z. Zhang, J. Wang, H. Lin et al., In situ formation of gel electrolyte with enhanced diffusion kinetics and stability for achieving fast-charging Li-ion batteries. Adv. Funct. Mater. 35(3), 2570017 (2025). https://doi.org/10.1002/adfm.20257001710.1002/adfm.202570017 ↗
38. F. Pei, L. Wu, Y. Zhang, Y. Liao, Q. Kang et al., Interfacial self-healing polymer electrolytes for long-cycle solid-state lithium-sulfur batteries. Nat. Commun. 15(1), 351 (2024). https://doi.org/10.1038/s41467-023-43467-w10.1038/s41467-023-43467-w ↗
39. Z. Ju, X. Tao, Y. Wang, Q. Yang, T. Liu et al., A self-healing Li-crosslinked elastomer promotes a highly robust and conductive solid–electrolyte interphase. Energy Environ. Sci. 17(13), 4703–4713 (2024). https://doi.org/10.1039/d4ee01359j10.1039/d4ee01359j ↗
40. P.G. Bruce, C.A. Vincent, Steady state current flow in solid binary electrolyte cells. J. Electroanal. Chem. Interfacial Electrochem. 225(1–2), 1–17 (1987). https://doi.org/10.1016/0022-0728(87)80001-310.1016/0022-0728(87)80001-3 ↗
41. Z. Tian, Y. Zou, G. Liu, Y. Wang, J. Yin et al., Electrolyte solvation structure design for sodium ion batteries. Adv. Sci. 9(22), 2201207 (2022). https://doi.org/10.1002/advs.20220120710.1002/advs.202201207 ↗
42. Z. Yang, H. Jiang, X. Li, X. Liang, J. Wei et al., Fabricating wide-temperature-range quasi-solid sodium batteries with fast ion transport via tin additives. Adv. Funct. Mater. 34(45), 2407713 (2024). https://doi.org/10.1002/adfm.20240771310.1002/adfm.202407713 ↗
43. W. Zhang, J. Zhang, X. Liu, H. Li, Y. Guo et al., In-situ polymerized gel polymer electrolytes with high room-temperature ionic conductivity and regulated Na+ solvation structure for sodium metal batteries. Adv. Funct. Mater. 32(25), 2201205 (2022). https://doi.org/10.1002/adfm.20220120510.1002/adfm.202201205 ↗
44. W. Tian, Z. Li, L. Miao, Z. Sun, Q. Wang et al., Composite quasi-solid-state electrolytes with organic–inorganic interface engineering for fast ion transport in dendrite-free sodium metal batteries. Adv. Mater. 36(13), 2308586 (2024). https://doi.org/10.1002/adma.20230858610.1002/adma.202308586 ↗
45. X. Zhou, Z. Li, W. Li, X. Li, J. Fu et al., Regulating Na-ion solvation in quasi-solid electrolyte to stabilize Na metal anode. Adv. Funct. Mater. 33(11), 2212866 (2023). https://doi.org/10.1002/adfm.20221286610.1002/adfm.202212866 ↗
46. W. Tian, G. Lin, S. Yuan, T. Jin, Q. Wang et al., Competitive coordination and dual interphase regulation of MOF-modified solid-state polymer electrolytes for high-performance sodium metal batteries. Angew. Chem. Int. Ed. 64(13), e202423075 (2025). https://doi.org/10.1002/anie.20242307510.1002/anie.202423075 ↗
47. Z. Xu, C. Lin, J. Qiu, Z. Wang, Polymer-regulated solvation and interphase engineering for long-life and safe quasi-solid-state anode-free sodium batteries. Adv. Mater. 37(34), 2506037 (2025). https://doi.org/10.1002/adma.20250603710.1002/adma.202506037 ↗
48. Y. Ren, M. Yang, Z. Shi, J. Guo, D. Chu et al., A metalophilic, anion-trapped composite gel electrolyte enables highly stable electrode/electrolyte interfaces in sodium metal batteries. Energy Storage Mater. 61, 102909 (2023). https://doi.org/10.1016/j.ensm.2023.10290910.1016/j.ensm.2023.102909 ↗
49. X. Guo, Z. Xie, R. Wang, J. Luo, J. Chen et al., Interface-compatible gel-polymer electrolyte enabled by NaF-solubility-regulation toward all-climate solid-state sodium batteries. Angew. Chem. Int. Ed. 63(18), e202402245 (2024). https://doi.org/10.1002/anie.20240224510.1002/anie.202402245 ↗
50. M. Yang, F. Feng, Z. Shi, J. Guo, R. Wang et al., Facile design of asymmetric flame-retardant gel polymer electrolyte with excellent interfacial stability for sodium metal batteries. Energy Storage Mater. 56, 611–620 (2023). https://doi.org/10.1016/j.ensm.2023.01.04310.1016/j.ensm.2023.01.043 ↗
51. X. Zhang, M. Zhang, J. Wu, X. Hu, B. Fu et al., Lewis acid fluorine-donating additive enables an excellent semi-solid-state electrolyte for ultra-stable lithium metal batteries. Nano Energy 115, 108700 (2023). https://doi.org/10.1016/j.nanoen.2023.10870010.1016/j.nanoen.2023.108700 ↗
52. J.-X. Guo, F. Jiang, N.-L. Shen, W.-B. Tang, T. Wang et al., Host–guest interactions for electrochemically stable and thermally safe lithium metal batteries. ACS Energy Lett. 9(10), 4800–4809 (2024). https://doi.org/10.1021/acsenergylett.4c0158310.1021/acsenergylett.4c01583 ↗
53. G. Ye, L. Zhu, Y. Ma, M. He, C. Zheng et al., Molecular design of solid polymer electrolytes with enthalpy-entropy manipulation for Li metal batteries with aggressive cathode chemistry. J. Am. Chem. Soc. 146(40), 27668–27678 (2024). https://doi.org/10.1021/jacs.4c0906210.1021/jacs.4c09062 ↗
54. T. Wang, B. Chen, C. Liu, T. Li, X. Liu, Build a high-performance all-solid-state lithium battery through introducing competitive coordination induction effect in polymer-based electrolyte. Angew. Chem. Int. Ed. 63(16), e202400960 (2024). https://doi.org/10.1002/anie.20240096010.1002/anie.202400960 ↗
55. J. Guo, F. Feng, X. Jiang, R. Wang, D. Chu et al., Boosting selective Na+ migration kinetics in structuring composite polymer electrolyte realizes ultrastable all-solid-state sodium batteries. Adv. Funct. Mater. 34(26), 2313496 (2024). https://doi.org/10.1002/adfm.20231349610.1002/adfm.202313496 ↗
56. S. Kim, J.H. Jeon, K. Park, S.H. Kweon, J.-H. Hyun et al., Electrolyte design for high-voltage lithium-metal batteries with synthetic sulfonamide-based solvent and electrochemically active additives. Adv. Mater. 36(24), e2401615 (2024). https://doi.org/10.1002/adma.20240161510.1002/adma.202401615 ↗
57. W. Xie, J. Wu, X. Li, Z. Song, L. Tong et al., Synergizing interfacial electric field regulation and in situ robust interphases for stable lithium metal batteries at high currents. Angew. Chem. Int. Ed. 64(15), e202501005 (2025). https://doi.org/10.1002/anie.20250100510.1002/anie.202501005 ↗
58. S. Tang, Y.-Y. Zhang, X.-G. Zhang, J.-T. Li, X.-Y. Wang et al., Stable Na plating and stripping electrochemistry promoted by in situ construction of an alloy-based sodiophilic interphase. Adv. Mater. 31(16), 1807495 (2019). https://doi.org/10.1002/adma.20180749510.1002/adma.201807495 ↗
59. X.X. Liu, L. Pan, H. Zhang, C. Liu, M. Cao et al., Indium-MOF as multifunctional promoter to remove ionic conductivity and electrochemical stability constraints on fluoropolymer electrolytes for all-solid-state lithium metal battery. Nano-Micro Lett. 17(1), 249 (2025). https://doi.org/10.1007/s40820-025-01760-x10.1007/s40820-025-01760-x ↗
60. Q. Liu, Q. An, K. Zeng, M. Yang, H. Zhu et al., Tuning electronic structure of MOF-based solid-state electrolytes to activate dormant lithium and facilitate ion transport kinetics towards lithium metal batteries. Energy Environ. Sci. 18(10), 4934–4948 (2025). https://doi.org/10.1039/d5ee00545k10.1039/d5ee00545k ↗
61. P. Xu, Y.-C. Gao, Y.-X. Huang, Z.-Y. Shuang, W.-J. Kong et al., Solvation regulation reinforces anion-derived inorganic-rich interphase for high-performance quasi-solid-state Li metal batteries. Adv. Mater. 36(44), 2409489 (2024). https://doi.org/10.1002/adma.20240948910.1002/adma.202409489 ↗
62. T. Hou, D. Wang, B. Jiang, Y. Liu, J. Kong et al., Ion bridging enables high-voltage polyether electrolytes for quasi-solid-state batteries. Nat. Commun. 16(1), 962 (2025). https://doi.org/10.1038/s41467-025-56324-910.1038/s41467-025-56324-9 ↗
63. Z. Li, R. Yu, S. Weng, Q. Zhang, X. Wang et al., Tailoring polymer electrolyte ionic conductivity for production of low- temperature operating quasi-all-solid-state lithium metal batteries. Nat. Commun. 14(1), 482 (2023). https://doi.org/10.1038/s41467-023-35857-x10.1038/s41467-023-35857-x ↗
64. Z. Yang, G. Li, J. Sun, L. Xie, Y. Jiang et al., High performance cathode material based on Na3V2(PO4)2F3 and Na3V2(PO4)3 for sodium-ion batteries. Energy Storage Mater. 25, 724–730 (2020). https://doi.org/10.1016/j.ensm.2019.09.01410.1016/j.ensm.2019.09.014 ↗
65. B. Ge, L. Hu, X. Yu, L. Wang, C. Fernandez et al., Engineering triple-phase interfaces around the anode toward practical alkali metal-air batteries. Adv. Mater. 36(27), e2400937 (2024). https://doi.org/10.1002/adma.20240093710.1002/adma.202400937 ↗