journal article·1997-01

X-ray mapping of interstitial phases in sulphate resisting cement clinker

E. Bäckström, S. Hansen

Advances in Cement Research· Volume 9· Issue 33
Publisher page

Abstract

Industrial sulphate-resisting cement clinker has been investigated by elemental mapping and X-ray microanalysis (EDS) in a scanning electron microscope; powder X-ray diffraction (XRD) and X-ray fluorescence analysis. The interstitial material mainly consists of ferrite Ca2·01(07)Al0·71( 7)Fe0·89(6)Mg0·08(2)Mn0·05(2)Si0·16(4)Ti0·03(1)P0·009(3) O5 (EDS), plus minor amounts of an orthorhombic aluminate (XRD) and potassium sulphate (EDS). In the elemental maps (Ca, Si, Al, Fe, K. S), recorded using the characteristic Ka X-rays; alite, belite, ferrite, potassium sulphate and pores are readily identified, while aluminates are only rarely distinguishable. Free lime, periclase, unreacted silica, and secondary alite should be easy to recognize, but were not observed. Chlorine or sodium were not detected in the clinker. More potassium sulphate was associated with belite, than with a lite, and the texture of the interstitial potassium sulphate suggests that at high temperature, molten potassium sulphate wets the belite crystals, but not the alite crystals.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Euroc Research AB; National Centre for HREM

References

Reference metadata was not supplied for this record.