Experimental investigation of the effects of dispersed nanoalumina additive on plastic viscosity and yield stress values of cement-based grouts with fly ash
Source abstract
Abstract
The effects of nanoalumina (n-Al2O3) additions at various proportions by mass (0.0, 0.3, 0.6, 0.9, 1.2 and 1.5%) on plastic viscosity and yield stress values of cement-based grout replacement with fly ash at different contents (0% for control purposes, 5, 10, 15, 20, 25 and 30%) were experimentally studied in this work. To minimize nanoalumina precipitation in free water and to provide homogeneous dispersion in water by removing these adhering nanopowders from each other, the ultrasonication method was applied. Test results showed that shear thickening (dilatant) behaviour was observed in all grout samples. The flowability of cement-based grouts containing fly ash considerably increases with the amount of nanoalumina added to the grout samples. The addition of nanoalumina and fly ash together in the grout mixes caused a considerable decrease in the yield stress value of these mixtures. Moreover, using all the experimental data obtained, an artificial neural network was developed to predict the plastic viscosity and yield stress values. The developed model was able to predict plastic viscosity with an average error rate of −0.17% and yield stress with an average error rate of 0.24%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Grouting, Rheology, and Soil Mechanics · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Niğde Ömer Halisdemir University Department of Information Systems and Technologies, , Niğde,
Niğde Ömer Halisdemir University Civil Engineering Department, , Niğde,
Niğde Ömer Halisdemir University Electric and Energy Department, , Niğde,
Funding
The Scientific and Technological Research Council of Türkiye-TUBITAK
References (70)
Show source-provided references
1. Experimental and neural network modeling of partial uptake for a carbon dioxide/methane/water ternary mixture on 13X zeolite10.1002/ente.201600688 ↗
2. Prediction of thermal conductivity of various nanofluids using artificial neural network10.1016/j.icheatmasstransfer.2016.03.008 ↗
3. Application of artificial neural networks (ANN) for vapor-liquid-solid equilibrium prediction for CH4-CO2 binary mixture10.1002/ghg.1833 ↗
4. Prediction of thermal conductivity of alumina water-based nanofluids by artificial neural networks10.1016/j.powtec.2015.03.005 ↗
5. C150: Standard specification for Portland cement
6. Artificial intelligence in the field of nanofluids: a review on applications and potential future directions10.1016/j.powtec.2019.05.034 ↗
7. Nano-SiO2 contribution to mechanical, durability, fresh and microstructural characteristics of concrete: a review10.1016/j.conbuildmat.2018.05.266 ↗
8. An accurate RBF-NN model for estimation of viscosity of nanofluids10.1016/j.molliq.2016.10.049 ↗
9. A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers; its cause, character, and cure10.1016/0377-0257(94)01282-M ↗
10. Accelerating effects of colloidal nano-silica for beneficial calcium-silicate-hydrate formation in cement10.1016/j.cplett.2004.05.071 ↗
11. Open channel junction velocity prediction by using a hybrid self-neuron adjustable artificial neural network10.1016/j.flowmeasinst.2016.04.003 ↗
12. Modeling the influence of a process control agent on the properties of metal matrix composite powders using artificial neural networks10.1016/j.powtec.2012.04.045 ↗
13. Analysis of the effect of a new process control agent technique on the mechanical milling process using a neural network model: measurement and modeling10.1016/j.measurement.2013.02.005 ↗
14. Prediction of effect of reinforcement size and volume fraction on the abrasive wear behavior of AA2014/B4Cp MMCs using artificial neural network10.1007/s13369-014-1157-9 ↗
15. The observation of permeation grouting method as soil improvement technique with different grout flow models
16. An investigation of rheological properties of cement-based grout mixed with rice husk ash (RHA)10.1016/j.conbuildmat.2015.05.025 ↗
17. Rheological and workability effects of bottom ash usage as a mineral additive on the cement-based permeation grouting method10.1016/j.conbuildmat.2020.120186 ↗
18. Developing optimal artificial neural network (ANN) to predict the specific heat of water based yttrium oxide (Y2O3) nanofluid according to the experimental data and proposing new correlation10.1615/HeatTransRes.2020034724 ↗
19. A novel comparative analysis between the experimental and numeric methods on viscosity of zirconium oxide nanofluid: Developing optimal artificial neural network and new mathematical model10.1016/j.powtec.2020.12.053 ↗
20. An experimental study on the comparative analysis of the effect of the number of data on the error rates of artificial neural networks10.1002/er.5680 ↗
21. Experimental study for predicting the specific heat of water based Cu-Al2O3 hybrid nanofluid using artificial neural network and proposing new correlation10.1002/er.5417 ↗
22. Artificial intelligence approach in predicting the effect of elevated temperature on the mechanical properties of PET aggregate mortars: an experimental study10.1007/s13369-020-05280-1 ↗
23. An example of artificial neural networks modeling the distribution of mercury (Hg), which poses a risk to human health in the selection of settlements: Sarayönü (Türkiye)10.1007/s12517-023-11355-8 ↗
24. Influence of nano-sized mineral additions on performance of SCC10.1680/aonicd.34082.0006 ↗
25. Study of the shear thickening effect of superplasticizers on the rheological behaviour of cement pastes containing or not mineral additives10.1016/S0008-8846(00)00330-6 ↗
26. Agro-waste shaped porous Al2O3/Ni composites: Corrosion resistance performance and artificial neural network modelling10.1016/j.matchar.2018.05.026 ↗
27. Artificial neural network technique to predict the properties of multiwall carbon nanotube-fly ash reinforced aluminium composite10.1016/j.jmrt.2019.07.005 ↗
28. The thermal conductivity, viscosity, and cloud points of bentonite nanofluids with n-pentadecane as the base fluid10.1016/j.molliq.2019.112307 ↗
29. Carbonation model for fly ash concrete based on artificial neural network: development and parametric analysis10.1016/j.conbuildmat.2020.121050 ↗
30. Proximate analysis based prediction of gross calorific value of coals: a comparison of support vector machine, alternating conditional expectation and artificial neural network10.1016/j.fuproc.2014.09.001 ↗
31. Influence of superplasticizer on rheological behaviour of fresh cement mortars10.1016/j.cemconres.2003.07.002 ↗
32. Artificial intelligence approach on predicting current values of polymer interface Schottky diode based on temperature and voltage: an experimental study10.1016/j.spmi.2021.106864 ↗
33. Explanation for cause of shear thickening in concentrated colloidal suspensions10.1122/1.550884 ↗
34. Modification effects of colloidal nano SiO2 on cement hydration and its gel property10.1016/j.compositesb.2012.05.056 ↗
35. The influence of temperature on the rheological properties of superplasticized cement pastes
36. Effect of welan gum-high-range water reducer combinations on rheology of cement grout
37. Advance treatment by nanographite for Portland pulverised fly ash cement (the class F) systems10.1016/j.compositesb.2015.08.003 ↗
38. Highly dispersed carbon nanotube reinforced cement-based materials10.1016/j.cemconres.2010.02.015 ↗
39. Artificial neural network prediction on wear of Al6061 alloy metal matrix composites reinforced with -Al2O3
40. Stability, thermal performance and artificial neural network modeling of viscosity and thermal conductivity of Al2O3-ethylene glycol nanofluids10.1016/j.powtec.2020.01.006 ↗
41. Effect of nano-CaCO3 on properties of cement paste10.1016/j.egypro.2012.01.158 ↗
42. The pozzolanic reactivity of monodispersed nanosilica hydrosols and their influence on the hydration characteristics of Portland cement10.1016/j.cemconres.2012.09.004 ↗
43. Effect of graphite nanoplatelets and carbon nanofibers on rheology, hydration, shrinkage, mechanical properties, and microstructure of UHPC10.1016/j.cemconres.2018.01.001 ↗
44. Carbon nanofiber-reinforced cement-based materials10.3141/2142-17 ↗
45. Moseley · 199310.4324/9780203305201 ↗
46. The effects of SiO2 nanoparticles on physical and mechanical properties of high strength compacting concrete10.1016/j.compositesb.2010.09.025 ↗
47. Effect of nano-SiO2, nano-Al2O3 and nano-Fe2O3 powders on compressive strengths and capillary water absorption of cement mortar containing fly ash: a comparative study10.1016/j.enbuild.2012.12.014 ↗
48. A viscosity prediction model for cement paste with nano-SiO2 particles10.1016/j.conbuildmat.2018.07.070 ↗
49. Influence of nano-SiO2, nano-CaCO3 and nano-Al2O3 on rheological properties of cement–fly ash paste10.3390/ma1216259 ↗
50. Influence of temperature on the yield value of highly flowable micromortars made with sulfonate-based superplasticizer10.1016/j.cemconres.2004.04.025 ↗
51. Coupled effect of time and temperature on variations of yield value of highly flowable mortar10.1016/j.cemconres.2008.12.007 ↗
52. Surface-modified graphite nanomaterials for improved reinforcement efficiency in cementitious paste10.1016/j.carbon.2013.06.069 ↗
53. A synopsis about the effect of nano-Al2O3, nano-Fe2O3, nano-Fe3O4 and nano-clay on some properties of cementitious materials – A short guide for civil engineer10.1016/j.matdes.2013.05.035 ↗
54. An inspection of thermal conductivity of CuO-SWCNTs hybrid nanofluid versus temperature and concentration using experimental data, ANN modeling and new correlation10.1016/j.molliq.2017.02.015 ↗
55. The influence of wall slip on yield stress and viscoelastic measurements of cement pastes10.1016/S0008-8846(00)00440-3 ↗
56. Preparation of size controlled silica nano particles and ıts functional role in cementitious system10.3151/jact.10.345 ↗
57. Experimental design to optimize high-volume of fly ash grout in the presence of welan gum and super plasticizer10.1007/BF02483157 ↗
58. Rheological properties of grouts with viscosity modifying agents as diutan gum and welan gum incorporating pulverised fly ash10.1016/j.cemconres.2006.05.016 ↗
59. Optimization of cement grouts containing silica fume and viscosity modifying admixture10.1061/(ASCE)MT.1943-5533.0000026 ↗
60. Effect of nanosilica on rheology, fresh properties, and strength of cement-based grouts10.1061/(ASCE)MT.1943-5533.0001080 ↗
61. Optimisation of rheological parameters and mechanical properties of superplasticised cement grouts containing metakaolin and viscosity modifying admixture10.1016/j.conbuildmat.2012.07.102 ↗
62. The mechanical properties and electrochemical behavior of cement paste containing nano-MgO at different curing temperature10.1016/j.conbuildmat.2018.01.011 ↗
63. Automatic recognition of oil reservoir models from well testing data by using multi-layer perceptron networks10.1016/j.petrol.2011.03.002 ↗
64. Artificial neural network approach for prediction of thermal behavior of nanofluids flowing through circular tubes10.1016/j.powtec.2014.06.062 ↗
65. Prediction of the influence of processing parameters on synthesis of Al2024–B4C composite powders in a planetary mill using an artificial neural network10.1515/secm-2013-0148 ↗
66. Shear thickening in colloidal dispersions10.1063/1.3248476 ↗
67. Grouting post-tensioned concrete bridges: the prevention of voids
68. Analytical models for estimating yield stress of high-performance pseudo plastic grout10.1016/S0008-8846(01)00476-8 ↗
69. Effect of temperature on the properties of superplasticized concrete
70. The fresh properties of nano silica incorporating polymer-modified cement pastes10.1016/j.conbuildmat.2018.02.084 ↗