journal article·2024-01-01

Cryogenic cooling using liquid nitrogen to produce massive concrete: temperature, setting time and compressive strength

Malik I. Alamayreh, Rana A. M. Alhorani, Subhi M. Bazlamit

Advances in Cement Research· Volume 36· Issue 1
Publisher page

Abstract

Mixing cement with water in mass concrete production is associated with hydration heat generation, which may cause concrete mixes to dry out and crack. The experimental work aims to evaluate the effects of using liquid nitrogen (LN) in cooling mortar mixes and concrete. LN was used in doses of 0, 25, 50, 75 and 100% by water volume to either cool the mixing water at T = 4°C or to inject it into concrete mixtures directly. The concrete mix proportions were based on ACI PRC-207.1-21 for mass concrete. The mortars' initial and final setting times and temperatures indicated that a greater percentage of LN delayed the hardening process and the peak hardening rates, exhibiting slower cement hydration. LN cooling enhances the compressive strength of mortar and concrete cubes when VLN/Vwater≤1. However, concrete compressive strength decreased due to ice formation that turned into voids when VLN/Vwater>1. Cooling concrete with chilled water (T = 4°C) showed a 30% and 34.51% increase in mortar and concrete cubes' compressive strength, respectively, and a maximum of 16.45% and 12.97% when LN was injected into mortars and concrete mixes. Cooling the concrete with chilled water (T = 4°C) showed a slower cooling process, which improved cement hydration results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Associate Professor, Department of the Alternative Energy Technology, Faculty of Engineering and Technology, Al-Zaytoonah University of Jordan, Amman, Jordan (corresponding author: )

Assistant Professor, Civil and Infrastructure Engineering Department, Faculty of Engineering and Technology, Al-Zaytoonah University of Jordan, Amman, Jordan

Professor, Director of Standards and Policy, Indiana Department of Transportation, Indianapolis, IN, USA

References (50)

Show source-provided references
1. 10.4028/www.scientific.net/KEM.711.11810.4028/www.scientific.net/KEM.711.118 ↗
2. 10.3311/CCC2018-01910.3311/CCC2018-019 ↗
3. 10.1680/jstbu.20.0006710.1680/jstbu.20.00067 ↗
4. ACI (American Concrete Institute) (2016) ACI 301-16: Specifications for structural concrete. American Concrete Institute, Farmington Hills, MI, USA.
5. ACI (2020a) ACI PRC-207.4-20: Cooling and insulating systems for mass concrete. American Concrete Institute, Farmington Hills, MI, USA.
6. ACI (2020b) ACI PRC-305-20: Guide to hot weather concreting. American Concrete Institute, Farmington Hills, MI, USA.
7. 10.1016/B978-0-08-100693-1.00003-510.1016/B978-0-08-100693-1.00003-5 ↗
8. 10.3176/oil.2019.4.0510.3176/oil.2019.4.05 ↗
9. 10.1615/TFEC2017.iac.01732210.1615/TFEC2017.iac.017322 ↗
10. 10.3390/en1503112910.3390/en15031129 ↗
11. 10.1016/j.conbuildmat.2015.01.03510.1016/j.conbuildmat.2015.01.035 ↗
12. 10.1007/978-3-319-76617-1_610.1007/978-3-319-76617-1_6 ↗
13. Bamforth P and Price W (1995) Report 135. Concreting Deep Lifts and Large Volume Pours. Ciria (Construction Industry Research and Information Association), London, UK.
14. 10.1016/j.conbuildmat.2013.12.07310.1016/j.conbuildmat.2013.12.073 ↗
15. Beaver W · Concrete International · 2004 · 26 · 93
16. 10.1016/B978-0-08-028670-9.50015-610.1016/B978-0-08-028670-9.50015-6 ↗
17. 10.1016/j.conbuildmat.2016.12.13610.1016/j.conbuildmat.2016.12.136 ↗
18. 10.1016/j.cemconcomp.2014.02.00610.1016/j.cemconcomp.2014.02.006 ↗
19. El-Naqa A · JJEES · 2021 · 12 · 306
20. 10.1016/j.conbuildmat.2022.12707010.1016/j.conbuildmat.2022.127070 ↗
21. Harith IK · Innovative Infrastructure Solutions · 2022 · 7 · 110.1007/s41062-021-00731-6 ↗
22. 10.1016/j.cemconres.2019.10582710.1016/j.cemconres.2019.105827 ↗
23. 10.1016/j.conbuildmat.2019.07.08510.1016/j.conbuildmat.2019.07.085 ↗
24. ICOLD (International Commission on Large Dams) · 1990
25. Juenger MC · ACI Materials Journal · 2010 · 107 · 123
26. 10.1007/s13369-021-06496-510.1007/s13369-021-06496-5 ↗
27. 10.1016/j.cemconres.2019.05.01510.1016/j.cemconres.2019.05.015 ↗
28. Mehta PK · 2014
29. Mohd Zuki SS · 157
30. 10.1051/matecconf/2017870102110.1051/matecconf/20178701021 ↗
31. Neville AM · 1995
32. 10.1016/S1877-7058(14)00002-210.1016/S1877-7058(14)00002-2 ↗
33. Rutherford & Titan · 2023
34. 10.1016/j.cscm.2019.e0028910.1016/j.cscm.2019.e00289 ↗
35. 10.1016/j.cemconres.2015.05.02510.1016/j.cemconres.2015.05.025 ↗
36. 10.1016/j.conbuildmat.2015.11.03910.1016/j.conbuildmat.2015.11.039 ↗
37. Singh G (2019) Building Construction and Materials. Rajsons Publications Pvt. Ltd, New Delhi, India, pp. 344–345.
38. 10.1007/978-3-319-76617-1_510.1007/978-3-319-76617-1_5 ↗
39. Tanash AO · Construction · 2022 · 2 · 110.15282/construction.v2i1.7188 ↗
40. 10.1016/j.istruc.2019.03.01510.1016/j.istruc.2019.03.015 ↗
41. Vespalec A · Materials · 2020 · 13 · 210.3390/ma13225147 ↗
42. 10.1016/j.conbuildmat.2017.12.05410.1016/j.conbuildmat.2017.12.054 ↗
43. 10.1016/j.conbuildmat.2020.11880710.1016/j.conbuildmat.2020.118807 ↗
44. 10.1016/j.conbuildmat.2021.12373410.1016/j.conbuildmat.2021.123734 ↗
45. 10.1002/suco.20170000910.1002/suco.201700009 ↗
46. 10.1016/j.istruc.2022.09.10110.1016/j.istruc.2022.09.101 ↗
47. 10.1016/j.jobe.2020.10191510.1016/j.jobe.2020.101915 ↗
48. 10.1016/j.cemconres.2021.10661110.1016/j.cemconres.2021.106611 ↗
49. 10.1016/j.cemconres.2020.10628310.1016/j.cemconres.2020.106283 ↗
50. 10.1016/B978-0-12-814519-7.00012-410.1016/B978-0-12-814519-7.00012-4 ↗