journal article·2018-07

A newly developed strength-graded material and its deformation behaviour

Xiaodong Zhao, Guoqing Zhou, Ruilin Li

Advances in Cement Research· Volume 30· Issue 7
Publisher page

Abstract

The design and preparation of a cement-based composite material (CCM) with a strength gradient is described. The strength gradient was achieved by altering the water/cement ratio and the curing time along the section height of the sample. The experimental results were compared with thermal-gradient-induced deformation (TGD) obtained in K0DCGF tests (freezing with non-uniform temperature under loading after K0 consolidation). The deformation behaviour in the CCM, which was different from any previously functionally graded material, coincided well with the TGD. The scaled-up mean stress and strain of the CCM were, respectively, over 97% and less than 120% of the values obtained in the K0DCGF test. A simulated TGD profile from the CCM was used to characterise the thermal-gradient-induced heterogeneity. A linear response between peak strength or volumetric strain and heterogeneity was observed in the K0DCGF test, and this was independent of the selection of the describing variable. The use of CCMs to model and reconstruct TGD profiles offers potential advantages because it can prevent problems arising from measuring deformation in a non-transparent environment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou, Jiangsu, China (corresponding author: )

State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou, Jiangsu, China

References (15)

Show source-provided references
1. Hu XD · Journal of China Coal Society · 2012 · 37 · 379
2. 10.1016/j.coldregions.2010.08.00610.1016/j.coldregions.2010.08.006 ↗
3. 10.1016/S0165-232X(98)00020-210.1016/S0165-232X(98)00020-2 ↗
4. 10.1029/1999JB90037110.1029/1999JB900371 ↗
5. 10.1016/j.tust.2015.07.00810.1016/j.tust.2015.07.008 ↗
6. Sheng TB · Chinese Journal of Geotechnical Engineering · 2012 · 34 · 1516
7. Singh KK · International Journal of Geomechanics · 2014 · 14 · 153210.1061/(ASCE)GM.1943-5622.0000295 ↗
8. 10.1016/j.tust.2007.06.01010.1016/j.tust.2007.06.010 ↗
9. Wang JZ (2008)) Research into the Mechanics Characteristics of Heterogeneous Thick Frozen Wall in Deep Alluvium. PhD thesis, China University of Mining and Technology, Xuzhou, China (in Chinese).
10. Zhao XD · Chinese Journal of Geotechnical Engineering · 2014 · 34 · 2350
11. 10.1016/j.coldregions.2011.02.00910.1016/j.coldregions.2011.02.009 ↗
12. 10.1016/j.tust.2013.09.00310.1016/j.tust.2013.09.003 ↗
13. 10.1007/s11440-015-0424-610.1007/s11440-015-0424-6 ↗
14. 10.1016/j.coldregions.2017.01.00110.1016/j.coldregions.2017.01.001 ↗
15. Zhang QY · Rock and Soil Mechanics · 2008 · 29 · 2126