journal article·2004-07

Tensile behaviour of hybrid fibre-reinforced concrete

P. Sukontasukkul

Advances in Cement Research· Volume 16· Issue 3
Publisher page

Abstract

In this work, the tensile behaviour of hybrid fibre-reinforced concrete (FRC) was studied. Two different fibres, steel and polypropylene, were used to form single and hybrid FRC systems at five different volume fractions (1% to 5%). It was found that the tensile properties of FRC depended mostly on the type, content and selected FRC system. Single type steel fibre-reinforced concrete (SS-FRC) was found to behave in a typical manner, with peak load occurring at a very small deformation followed by a drop of the load to zero with no sign of load recovery. In the case of single type polypropylene fibre-reinforced concrete (SP-FRC) the behaviour was more ductile and presented mostly a double-peak response: a first peak at small deformation and a second peak large deformation. Steel fibres are believed to contribute more to strength whereas polypropylene fibres are believed to contribute to the ductility (i.e. toughness). For hybrid systems (Hy-FRC), it was found that the behaviour was in fact the combined behaviour of steel and polypropylene. The response of Hy-FRC was more balanced in terms of strength (first peak) and post-peak ductility.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, Faculty of Engineering, King Mongkut's Institute of Technology—North Bangkok, 1518 Pibulsongkram Road, Bangsue, Bangkok 10800, Thailand

References (8)

Show source-provided references
1. Romualdi J. P. · Proceedings of the ASCE · 1963 · 89 · 147
2. Romualdi J. P. · ACI Journal, Proceedings · 1964 · 61 · 657
3. Manfore G. E. · Journal, PCA Research and Development Laboratories · 1968 · 10 · 36
4. Shah S. P. · ACI Journal, Proceedings · 1971 · 68 · 126
5. Shah S. P. · Journal, Structural Division, ASCE · 1970 · 96 · 116710.1061/JSDEAG.0002601 ↗
6. Ramakrishnan V. · 1987 · 1 · 2·3
7. Balaguru P. · ACI Materials Journal · 1988 · 85 · 189
8. 10.1016/S0958-9465(01)00043-910.1016/S0958-9465(01)00043-9 ↗