journal article·2023-11-01Open access

Enhancement of geopolymerisation reactivity and thermal resistance using mixed types of fly ash

Viengsai Phavongkham, Suthee Wattanasiriwech, Darunee Wattanasiriwech

Advances in Cement Research· Volume 35· Issue 11

Abstract

Geopolymers prepared with class C fly ash (FA) often suffer from a flash geopolymerisation rate, making it difficult to work. Class F FA, however, may have low reactivity, so an admixture must be added to solve this problem. This research highlighted the use of mixed class C and class F FA as a precursor for geopolymer preparation to alleviate such problems. Optimisation of the precursor recipe and the solid-to-liquid ratio (S/L) was assessed. The highest compressive strength (30.54 MPa) and a suitable initial (136 min) and final (240 min) setting times were obtained with S/L = 2.00, and 50 : 50 proportions of class C to class F FA. The fire resistance test on a 10 mm thick geopolymer panel at 1000°C for 180 min showed a maximum temperature of ∼570–580°C on the reverse side without catastrophic failure, suggesting it can be applied for use in fire retardation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Technical officer, Department of Energy Efficiency and Promotion, Ministry of Energy and Mine, Lao PDR

PhD student, School of Science, Mae Fah Luang University, Thailand

Assistant Professor, School of Science, Mae Fah Luang University, Thailand

Associate Professor, School of Science, Mae Fah Luang University, Thailand (corresponding author: )

References (45)

Show source-provided references
1. 10.11113/aej.v10.1553510.11113/aej.v10.15535 ↗
2. Chindaprasirt P · Case Studies in Construction Materials · 2018 · 9 · e0019810.1016/j.cscm.2018.e00198 ↗
3. 10.1007/s10853-012-6353-y10.1007/s10853-012-6353-y ↗
4. 10.1016/j.micromeso.2007.05.06210.1016/j.micromeso.2007.05.062 ↗
5. Davidovits J (2011) Geopolymer Chemistry and Applications, 3rd edn. Institute Gèopolymère, Saint-Quentin, France.
6. Davidovits J (2015) Geopolymer Chemistry and Applications, 4th edn. Institute Gèopolymère, Saint-Quentin, France.
7. 10.1016/S0016-2361(03)00194-710.1016/S0016-2361(03)00194-7 ↗
8. Hardjito D · Journal of Modern Applied Science · 2008 · 2 · 3
9. 10.1016/j.jclepro.2020.12250010.1016/j.jclepro.2020.122500 ↗
10. 10.1061/(ASCE)MT.1943-5533.000035210.1061/(ASCE)MT.1943-5533.0000352 ↗
11. 10.1016/j.conbuildmat.2022.12652910.1016/j.conbuildmat.2022.126529 ↗
12. 10.1016/j.fuel.2006.07.01010.1016/j.fuel.2006.07.010 ↗
13. 10.4028/www.scientific.net/KEM.766.1910.4028/www.scientific.net/KEM.766.19 ↗
14. 10.1016/j.conbuildmat.2012.07.07510.1016/j.conbuildmat.2012.07.075 ↗
15. 10.1016/j.conbuildmat.2011.12.07910.1016/j.conbuildmat.2011.12.079 ↗
16. Malhotra V · 2008
17. 10.1016/j.conbuildmat.2011.11.02910.1016/j.conbuildmat.2011.11.029 ↗
18. 10.1016/j.conbuildmat.2014.05.08010.1016/j.conbuildmat.2014.05.080 ↗
19. 10.1016/j.proeng.2015.11.07710.1016/j.proeng.2015.11.077 ↗
20. 10.1016/j.conbuildmat.2018.07.07510.1016/j.conbuildmat.2018.07.075 ↗
21. Nurgesang FA (2016) Class C Fly Ash Based Geopolymer–Mullite–Cordierite Composites. Master's thesis, Mae Fah Luang University, Chiangrai, Thailand.
22. Nurgesang FA · Suranaree Journal of Science and Technology · 2016 · 23 · 45
23. 10.1016/j.matdes.2013.07.01810.1016/j.matdes.2013.07.018 ↗
24. 10.1016/j.ceramint.2021.01.19410.1016/j.ceramint.2021.01.194 ↗
25. 10.1016/j.matdes.2013.09.04910.1016/j.matdes.2013.09.049 ↗
26. 10.1533/978184569638210.1533/9781845696382 ↗
27. 10.1016/j.conbuildmat.2020.12166110.1016/j.conbuildmat.2020.121661 ↗
28. 10.1016/j.msea.2011.01.00510.1016/j.msea.2011.01.005 ↗
29. 10.1016/j.clay.2012.10.00610.1016/j.clay.2012.10.006 ↗
30. 10.1016/j.conbuildmat.2017.04.13910.1016/j.conbuildmat.2017.04.139 ↗
31. 10.1016/j.jclepro.2019.04.10310.1016/j.jclepro.2019.04.103 ↗
32. 10.1016/j.proeng.2016.06.62410.1016/j.proeng.2016.06.624 ↗
33. Sobolev K · 2017
34. Suraneni P · ACI Materials Journal · 2021 · 118 · 157
35. 10.1016/j.jmatprotec.2009.03.01610.1016/j.jmatprotec.2009.03.016 ↗
36. Topark-Ngarm P · Journal of Materials in Civil Engineering · 2015 · 27 · 110.1061/(ASCE)MT.1943-5533.0001157 ↗
37. 10.1088/1757-899X/288/1/01201910.1088/1757-899X/288/1/012019 ↗
38. 10.1016/j.ceramint.2017.06.16610.1016/j.ceramint.2017.06.166 ↗
39. 10.1016/j.ceramint.2017.08.21510.1016/j.ceramint.2017.08.215 ↗
40. 10.1016/j.conbuildmat.2021.12484710.1016/j.conbuildmat.2021.124847 ↗
41. 10.1007/s10853-006-0532-710.1007/s10853-006-0532-7 ↗
42. 10.1016/j.conbuildmat.2016.06.06710.1016/j.conbuildmat.2016.06.067 ↗
43. 10.3390/ma805222710.3390/ma8052227 ↗
44. 10.1021/acs.jpcc.8b0069710.1021/acs.jpcc.8b00697 ↗
45. 10.1088/1757-899X/209/1/01208510.1088/1757-899X/209/1/012085 ↗