journal article·2015-11

Densification mechanism of Ti-based metallic glass powders during spark plasma sintering process

L.H. Liu, C. Yang, Y.G. Yao, F. Wang, W.W. Zhang, Y. Long, Y.Y. Li

Intermetallics· Volume 66
Publisher page

Abstract

Abstract Densification mechanism of Ti 40.6 Zr 9.4 Cu 37.5 Ni 9.4 Al 3.1 metallic glass (MG) powder with different heating rates during spark plasma sintering process was investigated using annealed crystalline counterpart powder as the object of reference. Results show that compared with single-stage densification process in the whole sintering process for the annealed crystalline counterpart powder, MG powder contains a two-stage densification process. Meanwhile, higher heating rate promotes obviously densification behavior for the both kinds of alloy powders. Further densification mechanism analysis based on Frenkel model indicates that the activation energy of the viscous flow for MG powder in the supercooled liquid region decreases with increasing heating rate, thus promoting densification behavior of the MG powder in the first stage. In contrast, for the annealed crystalline counterpart powder, the promoting densification behavior with increasing heating rate is attributed to the higher temperature gradient between the sample center and the edge. The variation in the viscosity of melt-solidified Ti 40.6 Zr 9.4 Cu 37.5 Ni 9.4 Al 3.1 bulk MG with temperature at different heating rates confirms the correctness of the obtained densification mechanism in our case. The results obtained can provide a new insight to understand the advantage of MG powder in fabrication of nano/ultrafine-grained titanium alloys with nearly full density.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Bulk metallic glasses10.1016/j.mser.2004.03.001 ↗
2. Recent development and application products of bulk glassy alloys10.1016/j.actamat.2010.11.027 ↗
3. A new glass-forming ability criterion for bulk metallic glasses10.1016/S1359-6454(02)00166-0 ↗
4. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
5. Fabrication of 10 mm diameter fully dense Al86Ni6Y4.5Co2La1.5 bulk metallic glass with high fracture strength10.1016/j.msea.2013.01.041 ↗
6. Synthesis of Al-rich bulk metallic glass composites by warm extrusion of gas atomized powders10.1016/j.jallcom.2012.11.199 ↗
7. Consolidation and properties of ball-milled Ti50Cu18Ni22Al4Sn6 glassy alloy by equal channel angular extrusion10.1016/j.msea.2006.06.085 ↗
8. Bulk multimodal-grained irons with large plasticity fabricated by spark plasma sintering10.1016/j.msea.2013.10.076 ↗
9. New developments of Ti-based alloys for biomedical applications10.3390/ma7031709 ↗
10. Unusual dry sliding tribological behavior of biomedical ultrafine-grained TiNbZrTaFe composites fabricated by powder metallurgy10.1557/jmr.2014.58 ↗
11. Effect of Fe content on glass-forming ability and crystallization behavior of a (Ti69.7Nb23.7Zr4.9Ta1.7)100−xFex alloy synthesized by mechanical alloying10.1016/j.jallcom.2012.10.154 ↗
12. Effect of minor alloying substitution on glass-forming ability and crystallization behavior of a Ni57Zr22X8Nb8Al5 (X = Ti, Cu) alloy synthesized by mechanical alloying10.2320/matertrans.M2013184 ↗
13. Effect of V content on microstructure and mechanical property of a TiVCuNiAl composite fabricated by spark plasma sintering10.1016/j.matdes.2013.05.084 ↗
14. Equiaxed grained structure: a structure in titanium alloys with higher compressive mechanical properties10.1016/j.msea.2013.05.066 ↗
15. Ti-based bulk metallic glass matrix composites with in situ precipitated β-Ti phase fabricated by spark plasma sintering10.1016/j.jnoncrysol.2012.09.028 ↗
16. Ultrafine-grained Ti-based composites with high strength and low modulus fabricated by spark plasma sintering10.1016/j.msea.2012.09.047 ↗
17. Fabrication of biomedical Ti-35Nb-7Zr-5Ta alloys by mechanical alloying and spark plasma sintering10.1179/1743290111Y.0000000021 ↗
18. Fabrication of ultrafine-grained Ti66Nb18Cu6.4Ni6.1Al3.5 composites with High strength and distinct plasticity by spark plasma sintering and crystallization of amorphous phase10.2320/matertrans.MD201110 ↗
19. Microstructure evolution and thermal properties in FeMoPCB alloy during mechanical alloying10.1016/j.jnoncrysol.2012.03.024 ↗
20. Fabrication of Ti66V13Cu8Ni6.8Al6.2 bulk composites with high strength by spark plasma sintering and crystallization of amorphous phase10.4028/www.scientific.net/AMR.284-286.25 ↗
21. Nucleation and growth mechanism of crystalline phase for fabrication of ultrafine-grained Ti66Nb13Cu8Ni6.8Al6.2 composites by spark plasma sintering and crystallization of amorphous phase10.1016/j.msea.2010.09.037 ↗
22. Ultrafine-grained Ti66Nb13Cu8Ni6.8Al6.2 composites fabricated by spark plasma sintering and crystallization of amorphous phase10.1557/jmr.2009.0231 ↗
23. Viscous flow of the Pd 43Ni10Cu27P20 bulk metallic glass-forming liquid10.1063/1.1644052 ↗
24. A new Ti–Zr–Hf–Cu–Ni–Si–Sn bulk amorphous alloy with high glass-forming ability10.1016/j.jallcom.2006.03.006 ↗
25. Ti-based amorphous alloys with a wide supercooled liquid region10.1016/j.matlet.2007.03.048 ↗
26. Glass-forming ability and mechanical properties of Ti-based bulk glassy alloys with large diameters of up to 1cm10.1016/j.intermet.2008.05.006 ↗
27. Investigation of glass-forming ability, deformation and corrosion behavior of Ni-free Ti-based BMG alloys designed for application as dental implants10.1016/j.msec.2008.07.009 ↗
28. Viscosity measurements of Zr55Cu30Al10Ni5 supercooled liquid alloys by using penetration viscometer under high-speed heating conditions10.1016/j.intermet.2006.01.046 ↗
29. Viscous flow during sintering of attrition milled nanocrystalline titanium powders10.1016/j.materresbull.2006.10.008 ↗
30. Consolidation enhancement in spark-plasma sintering: Impact of high heating rates10.1063/1.2822189 ↗
31. The viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercooled liquid10.1063/1.114891 ↗
32. Viscous flow during spark plasma sintering of Ti-based metallic glassy powders10.1016/j.jallcom.2012.12.129 ↗
33. Study of temperature field in spark plasma sintering10.1016/S0921-5107(01)00780-2 ↗