Ultrasonic elliptical vibratory nanocutting mechanisms of Cu50Zr50 amorphous alloy: A molecular dynamics simulation
Source abstract
Abstract
The mechanical properties of amorphous alloy have been proven to be unique and have a great application value. In this study, the deformation mechanism of Cu 50Zr 50 amorphous alloy during ultrasonic elliptical vibration cutting (UEVC) was revealed via molecular dynamics simulation in detail. It is founded that the amorphous alloy was more easily removed via repeated extrusion during UEVC. The reason is that the shear transition zone (STZ) can be activated and proliferated from the perspectives of the instantaneous change of cutting angle, the reversal of friction, the increase of free volume and the increase of atomic movement. The influences of the evolution laws of shear strain, cutting temperature, cutting forces, and material removal rate (MMR) under different ultrasonic frequency, amplitude ratio, and phase angle were also investigated. The results showed that the dynamic shear strain reactivation of amorphous alloy was realized from shear strain zone (ηMises>0.1) to shear strain zone (ηMises>1.0), following by the STZs and the formation of shear band. Simultaneously, UEVC increases the von Mises shear strain comparing with the conventional cutting, and the energy required for plastic deformation was reduced due to the special driving forces for atomic movement. In addition, the cutting temperatures in UEVC are higher than conventional cutting in all cases, and the UEVC provides a 47.49 % reduction in maximum cutting forces and a 14.22 % reduction in average cutting forces. What`s more, the height of chip atomic piled-up increases from 12.5 Å to 21.0 Å due to the periodic changes of cutting depth, which improves the MMR effectively. The research is able to enrich the understanding of nanoscale deformation mechanisms in ultrasonic elliptical vibration nanocutting of Cu 50Zr 50 amorphous alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Nonlinear Optical Materials Studies · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. The elastic properties, elastic models and elastic perspectives of metallic glasses10.1016/j.pmatsci.2011.07.001 ↗
2. Amorphous–nanocrystalline alloys: fabrication, properties, and applications10.1016/j.mtadv.2019.100027 ↗
3. Structures and functional properties of amorphous alloys10.1002/sstr.202000057 ↗
4. Fractal atomic-level percolation in metallic glasses10.1126/science.aab1233 ↗
5. Indentation of glasses10.1016/j.pmatsci.2021.100834 ↗
6. Machining of a Zr–Ti–Al–Cu–Ni metallic glass10.1016/j.scriptamat.2003.11.052 ↗
7. The fracture of bulk metallic glasses10.1016/j.pmatsci.2015.05.002 ↗
8. Study on predictive model of cutting force and geometry parameters for oblique elliptical vibration cutting10.1016/j.ijmecsci.2016.08.004 ↗
9. Sustainable production of dry-ultra-precision machining of Ti–6Al–4V alloy using PCD tool under ultrasonic elliptical vibration-assisted cutting10.1016/j.jclepro.2019.119254 ↗
10. Microstructure evolution mechanism of tungsten induced by ultrasonic elliptical vibration cutting at atomic/nano scale10.1016/j.ijmecsci.2023.108397 ↗
11. Prediction of critical cutting depth for ductile-brittle transition in ultrasonic vibration assisted grinding of optical glasses10.1007/s00170-015-8274-9 ↗
12. Processing and machining mechanism of ultrasonic vibration-assisted grinding on sapphire10.1016/j.mssp.2022.106470 ↗
13. Ductile-regime machining model for ultrasonic elliptical vibration cutting of brittle materials10.1016/j.jmapro.2018.09.029 ↗
14. Study on the vertical ultrasonic vibration-assisted nanomachining process on single-crystal silicon10.1115/1.4052356 ↗
15. Suppression of forced vibration due to chip segmentation in ultrasonic elliptical vibration cutting of titanium alloy Ti–6Al–4V10.1016/j.precisioneng.2020.03.017 ↗
16. MD simulation of chip formation in nanometric cutting of metallic glass10.4028/www.scientific.net/AMR.476-478.434 ↗
17. Molecular dynamics simulations of nanometric cutting mechanisms of amorphous alloy10.1016/j.apsusc.2014.08.031 ↗
18. Machining mechanism and deformation behavior of high-entropy alloy under elliptical vibration cutting10.1016/j.intermet.2020.107079 ↗
19. Microstructure evolution mechanism of tungsten induced by ultrasonic elliptical vibration cutting at atomic/nano scale10.1016/j.ijmecsci.2023.108397 ↗
20. Revealing nanoscale material deformation mechanism and surface/subsurface characteristics in vibration-assisted nano-grinding of single-crystal iron10.1016/j.apsusc.2022.153692 ↗
21. Anisotropy dependence of material removal and deformation mechanisms during nanoscratch of gallium nitride single crystals on (0001) plane10.1016/j.apsusc.2021.152028 ↗
22. Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process10.1016/j.triboint.2012.06.027 ↗
23. Numerical investigation on the temperature effect in nanometric cutting of polycrystalline silicon10.1016/j.ijmecsci.2022.107172 ↗
24. Molecular dynamics, Monte Carlo simulations, and Langevin dynamics: a computational review10.1155/2015/183918 ↗
25. LAMMPS-a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
26. Accuracy of pair distribution function analysis applied to crystalline and non-crystalline materials10.1107/S0108767391011327 ↗
27. Using atomistic computer simulations to analyze x-ray diffraction data from metallic glasses10.1063/1.2769157 ↗
28. A second-generation reactive empirical bond order (REBO) potential energy expression for hydrocarbons10.1088/0953-8984/14/4/312 ↗
29. Allen · 2017
30. Study of nanoindentation behavior of amorphous alloy using molecular dynamics10.1016/j.apsusc.2014.02.179 ↗
31. Atomistic investigation of machinability of monocrystalline 3C–SiC in elliptical vibration-assisted diamond cutting10.1016/j.ceramint.2020.09.078 ↗
32. A novel investigation on horizontal and 3D elliptical ultrasonic vibrations in rotary ultrasonic surface machining of carbon fiber reinforced plastic composites10.1016/j.jmapro.2020.01.027 ↗
33. A novel ultrasonic elliptical vibration cutting device based on a sandwiched and symmetrical structure10.1007/s00170-018-2015-9 ↗
34. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
35. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
36. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
37. Strength and ductility enhancement of high-entropy FeCoNi2Al0. 9 alloy by ultrasonically refining eutectic structures10.1016/j.scriptamat.2022.115154 ↗
38. Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses10.1073/pnas.0806051105 ↗
39. Reduced glass transition temperature and glass forming ability of bulk glass forming alloys10.1016/S0022-3093(00)00064-8 ↗
40. Nanotribological characteristics and strain hardening of amorphous Cu64Zr36/crystalline Cu nanolaminates10.1016/j.triboint.2020.106275 ↗
41. Estimation of the glass transition temperature in metallic glasses10.1016/0921-5093(95)10054-7 ↗
42. Superior glass-forming ability of CuZr alloys from minor additions10.1557/jmr.2006.0212 ↗
43. Effect of machining parameters in ultrasonic vibration cutting10.1016/j.ijmachtools.2008.01.013 ↗
44. A molecular dynamics investigation into the mechanisms of subsurface damage and material removal of monocrystalline copper subjected to nanoscale high speed grinding10.1016/j.apsusc.2014.02.178 ↗
45. Study on strain rate and heat effect on the removal mechanism of SiC during nano-scratching process by molecular dynamics simulation10.1016/j.ijmecsci.2018.12.022 ↗
46. Material removal mechanism of SiC ceramics by elliptic ultrasonic vibration-assisted grinding (EUVAG) using single grain10.1016/j.ceramint.2022.11.184 ↗
47. Material removal mechanism and corresponding models in the grinding process: a critical review10.1016/j.jmapro.2023.08.045 ↗
48. Material removal rate prediction and surface quality study for ultrasonic vibration polishing of monocrystalline silicon10.1007/s00170-023-11811-5 ↗
49. Stability of amorphous metallic alloys10.1063/1.323173 ↗