journal article·2011-08

Combined ab initio and experimental study of A2 + L21 coherent equilibria in the Fe–Al–X (X = Ti, Nb, V) systems

P.R. Alonso, P.H. Gargano, P.B. Bozzano, G.E. Ramírez-Caballero, P.B. Balbuena, G.H. Rubiolo

Intermetallics· Volume 19· Issue 8
Publisher page

Abstract

Abstract A combined theoretical and experimental study of ordering and phase separation in α-Fe alloys in the Fe–Al–X (X = Ti, Nb, V) systems is presented. The theoretical part is dedicated to the assessment of the BCC-based phase equilibrium diagram in the iron-rich zone of the ternary systems via a truncated cluster expansion, through the combination of Full-Potential-Linear augmented Plane Wave (FP-LAPW) electronic structure calculations and of Cluster Variation Method (CVM) thermodynamic calculations in the irregular tetrahedron approximation. The stability and the solid solubility of Al in the Fe2X Laves phases are also included in the discussion of the ternary BCC ground state diagrams. The approach was employed in order to explore particular vertical sections of the ternary systems where a coherent two-phase microstructure can be generated with an optimal combination of volume fraction of Fe2AlX (L21) Heusler type precipitates and Al content in the α-Fe (A2) matrix. The results indicate that in the Fe–Al–Ti and Fe–Al–V systems there are two kinds of phase separations of the BCC phase, (A2+ L21) and (B2 (FeAl structure) + L21). A tie-line separates both two-phase fields that shrinks and moves toward the Fe-X binary system while its direction remains almost parallel as the temperature increases. Selected experiments were performed on three alloys of the Fe–Al–Ti system belonging to vertical sections that contain this tie-line. The microstructure and composition of the matrix and precipitate phases were characterized by transmission electron microscopy (TEM) and Energy Dispersive Spectroscopy (EDS), the theoretical predictions were borne out.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. The oxidation-sulfidation behavior of iron alloys containing 16–40 at% aluminum10.1016/0010-938X(93)90325-B ↗
2. Compositional influences on the high-temperature corrosion resistance of iron aluminides
3. High temperature corrosion behaviour of iron aluminides and iron-aluminium-chromium alloys10.1002/maco.19960471205 ↗
4. Critical factors affecting the high-temperature corrosion performance of iron aluminides10.1016/S0921-5093(98)00924-1 ↗
5. Iron aluminides: present status and future prospects10.1016/S0921-5093(98)00909-5 ↗
6. Melting and casting of FeAl-based cast alloy10.1016/S0921-5093(98)00938-1 ↗
7. Moisture and hydrogen-induced embrittlement of iron aluminides10.1007/BF03222512 ↗
8. Strengthening at high temperatures by precipitates in Fe–Al–Nb alloys10.1016/j.intermet.2005.10.015 ↗
9. Concepts derived from phase diagram studies for the strengthening of Fe–Al-based alloys10.1016/j.intermet.2004.10.015 ↗
10. Effect of the alloying element chromium on the room temperature ductility of Fe3Al intermetallics10.1016/S0966-9795(00)00115-1 ↗
11. Characterization of the texture evolution during thermomechanical processing of an Fe–30at% Al–6at% Cr alloy10.1016/j.intermet.2006.07.003 ↗
12. Alloys based on Fe3Al or FeAl with strengthening Mo3Al precipitates10.1016/j.intermet.2004.03.013 ↗
13. Mechanical properties of Fe–Al–M–C (M=Ti, V, Nb, Ta) alloys with strengthening carbides and laves phase10.1016/j.intermet.2004.05.010 ↗
14. A study of precipitation in D03 ordered Fe–Al–Nb alloy10.1016/j.intermet.2005.01.008 ↗
15. Microstructure and mechanical properties of Fe3Al-based alloys with strengthening boride precipitates10.1016/j.intermet.2007.02.005 ↗
16. Room and high temperature mechanical behaviour of a Fe3Al-based alloy with α-α″ microstructure10.1016/S1359-6454(96)00178-4 ↗
17. Ferritic Fe–Al–Ni–Cr alloys with coherent precipitates for high-temperature applications10.1016/j.msea.2004.01.108 ↗
18. The strengthening effect of (Ni, Fe) Al precipitates on the mechanical properties at high temperatures of ferritic Fe–Al–Ni–Cr alloys10.1016/j.intermet.2004.07.048 ↗
19. Effects of Al on the microstructure and ductility of NiAl-strengthened ferritic steels at room temperature10.1016/j.intermet.2010.03.026 ↗
20. Characterization of microstructures, mechanical properties, and oxidation behavior of coherent A2 + L21 Fe-Al-Ti10.1557/jmr.2009.0403 ↗
21. Iron and its dilute substitutional solid solutions10.1007/BF02680580 ↗
22. Deformation behaviour of iron-rich iron-aluminium alloys at high temperatures10.1016/S1359-6454(03)00144-7 ↗
23. Assessment of the Al–Fe–Ti system10.1016/j.intermet.2005.11.026 ↗
24. Phase equilibria in the Fe corner of the Fe–Al–Nb system between 800 and 1150°C10.1016/j.jallcom.2008.07.036 ↗
25. Phase equilibria in iron-rich Fe-Al-V ternary alloy system
26. First principles calculation of L21+A2 coherent equilibria in the Fe–Al–Ti system10.1016/j.physb.2009.06.096 ↗
27. Ab initio modeling of alloy phase equilibria
28. Cluster approach to order-disorder transformations in alloys
29. First-principles statistical mechanics of structural stability of intermetallic compounds10.1103/PhysRevB.44.512 ↗
30. Automating first-principles phase diagram calculations10.1361/105497102770331596 ↗
31. A combined CALPHAD/first-principles remodeling of the thermodynamics of Al–Sr: unsuspected ground state energies by “rounding up the (un) usual suspects”10.1016/j.actamat.2004.02.022 ↗
32. Generalized cluster description of multicomponent systems10.1016/0378-4371(84)90096-7 ↗
33. Ordering and phase separation around Ti50Al25Mo25 composition in ternary Ti–Al–Mo bcc alloys10.1016/S0925-8388(03)00454-7 ↗
34. First-principles investigation of the Ni–Fe–Al system10.1016/j.intermet.2005.02.009 ↗
35. Ab initio calculation of the BCC Fe–Al–Mo (Iron–Aluminum–Molybdenum) phase diagram: Implications for the nature of the τ2 phase10.1016/j.calphad.2009.04.003 ↗
36. Singh · 2006
37. A technique for relativistic spin-polarised calculations10.1088/0022-3719/10/16/019 ↗
38. Blaha · 2001
39. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
40. Generalized gradient approximation made simple10.1103/PhysRevLett.78.1396 ↗
41. A theory of cooperative phenomena10.1103/PhysRev.81.988 ↗
42. Superposition approximation and natural iteration calculation in cluster- variation method
43. Electron theoretical investigation of the stability of the B2-TiFe compound10.1016/j.jallcom.2008.02.044 ↗
44. Theory and direct observation of dislocations in the Fe3Al superlattices10.1016/0001-6160(61)90107-9 ↗
45. Relative stability of bcc structures in ternary alloys with Ti50Al25Mo25 composition10.1103/PhysRevB.62.237 ↗
46. Phase stability study of the Al-Nb system10.1103/PhysRevB.56.552 ↗
47. Transition-metal aluminide formation: Ti, V, Fe, and Ni aluminides10.1103/PhysRevB.58.5981 ↗
48. Total energies and magnetic moments in Fe, V, and ordered FeV10.1103/PhysRevB.45.2934 ↗
49. Ternary transition-metal aluminide alloy formation: the BiF3 structure10.1103/PhysRevB.57.12134 ↗
50. Kubaschewski · 1982
51. Ab initio calculation of the bcc Fe–Al phase diagram including magnetic interactions10.1016/j.scriptamat.2005.12.024 ↗
52. Calculated thermal properties of metals10.1103/PhysRevB.37.790 ↗
53. Murray · 1987
54. Phase diagram features associated with multicritical points in alloys systems10.1007/BF02869288 ↗
55. Ordering and phase separation in the b.c.c. Phase of the Fe–Al–Ti system10.1016/S1359-6454(97)00376-5 ↗
56. Asta · Phys Rev B · 1998 · 57 · 1126510.1103/PhysRevB.57.11265 ↗
57. Clouet · Phys Rev B · 2002 · 65 · 09410510.1103/PhysRevB.65.094105 ↗
58. Chepulskii · Acta Materialia · 2009 · 57 · 531410.1016/j.actamat.2009.07.037 ↗
59. Chepulskii · Phys Rev B · 2009 · 79 · 13420310.1103/PhysRevB.79.134203 ↗
60. Combined ab initio and experimental study of structural and elastic properties of Fe3Al-based ternaries10.1016/j.intermet.2010.02.025 ↗
61. L21-ordered Fe–Al–Ti alloys10.1016/j.intermet.2009.12.036 ↗
62. Neutron diffraction study on site occupation of substitutional elements at sub lattices in Fe3Al intermetallics10.1016/S0921-5093(98)00919-8 ↗
63. Mechanisms of phase transformations within the miscibility gap of Fe-rich Fe-Al alloys10.1016/0001-6160(76)90063-8 ↗
64. Orientation relationship between C14 p.ecipitate and (A2 + D03) matrix in an Fe–20at.%Al–8at.%Ti alloy10.1016/j.scriptamat.2007.03.038 ↗
65. Formation of (B2 + D03) phases at a/2<1 0 0> anti-phase boundary in an Fe–23 at.%Al–8.5 at.%Ti alloy10.1016/j.scriptamat.2007.07.023 ↗