journal article·2021-12

Influence of high-temperature annealing on structure of titanium aluminide materials obtained by combustion and high-temperature shear deformation

A.D. Bazhina, P.M. Bazhin, A.P. Chizhikov, A.S. Konstantinov, A.M. Stolin

Intermetallics· Volume 139
Publisher page

Abstract

A compact material based on initial powders of titanium and aluminum (porosity <1%) was obtained by unrestricted SHS-compression. This method combines combustion processes in the mode of self-propagating high-temperature synthesis (combustion temperature – 1460 °C, combustion front propagation – 3.7 mm/s) and high-temperature shear deformation. The obtained material structure and phase composition were studied. The high-temperature shear deformation was shown to lead to textured structure of the material which consisted of alternating intermetallic phases in the following sequence: α 2-Ti 3Al, γ-TiAl, TiAl 2 и TiAl 3. Influence of high-temperature annealing at T = 1000 °C during 0.5–4 h on the material structure and phase composition was studied.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Advances and challenges of TiAl base alloys
2. Effect of pre-oxidation on cyclic oxidation resistance of γ-TiAl at 900 °C10.1016/j.corsci.2020.108985 ↗
3. Intermetallic titanium aluminides in aerospace applications – processing, microstructure and properties, Mater10.1080/09603409.2016.1163792 ↗
4. TiAl alloys in commercial aircraft engines10.1080/09603409.2016.1183068 ↗
5. An advanced TiAl alloy for high-performance racing applications10.3390/ma13214720 ↗
6. A study of residual Ti3Al in γ(TiAl) sheets using mismatch theory10.1016/j.matlet.2020.128423 ↗
7. Advances in gamma titanium aluminides and their manufacturing techniques10.1016/j.paerosci.2012.04.001 ↗
8. High resolution digital image correlation mapping of strain localization upon room and high temperature, high cycle fatigue of a TiAl intermetallic alloy10.1016/j.ijfatigue.2020.105905 ↗
9. High temperature wear behaviors of TiAl–TiB2 composites10.1007/s11249-017-0924-7 ↗
10. Local deformation at micro-notches and crack initiation in an intermetallic γ-TiAl-alloy10.1111/ffe.12356 ↗
11. Superplasticity of fine grained γ-TiAl based alloy synthesized by pulse current auxiliary sintering10.1016/j.matlet.2009.06.063 ↗
12. Spark plasma sintering of titanium aluminides: a progress review on processing, structure-property relations, alloy development and challenges10.3390/met10081080 ↗
13. Tougher TiAl alloy via integration of hot isostatic pressing and heat treatment10.1016/j.msea.2017.02.028 ↗
14. Structure, physical and mechanical properties of TiB-40 wt.%Ti composite materials obtained by unrestricted SHS compression10.1016/j.mtcomm.2020.101484 ↗
15. Properties and electronic structures of titanium aluminides-alumina composites from in-situ SHS process10.1016/j.msea.2010.11.039 ↗
16. Atomistic modelling of the γ-TiAl/α2-Ti3Al interfacial properties affected by solutes10.1016/j.matchemphys.2020.123434 ↗
17. Grain boundary wetting and material performance in an industrial EZ33A Mg cast alloy10.24425/amm.2019.129463 ↗
18. Bulk and surface low temperature phase transitions in the Mg-alloy EZ33A10.3390/met10091127 ↗
19. Strengthening zones in the Co matrix of WC–Co cemented carbides10.1016/j.scriptamat.2014.03.026 ↗