journal article·2023-02Open access

Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy at elevated temperatures

Zequn Zhang, Simon Fellner, Sergey Ketov, Megan J. Cordill, Huaping Sheng, Christian Mitterer, Kaikai Song, Christoph Gammer, Jürgen Eckert

Intermetallics· Volume 153

Abstract

The phase evolution of alloys is closely related to atomic diffusion. The influence of reactive diffusion on phase formation in high-entropy alloys (HEAs) is however still unclear. The present work systematically investigates the phase evolution of a multicomponent CoCrFeNi/Al diffusion couple through isochronous-reactive interdiffusion experiments. This provides a direct way to study the influence of enthalpy and entropy on the phase formation and element diffusion behavior. At temperatures below 1173 K, the enthalpy contribution dominates the total energy, leading to the formation of intermetallic compounds. When the temperature is in the range of 1173–1573 K, the entropy of mixing starts to play a more important role. This causes diffusion of Al towards the HEA without phase transformation, forming a more disordered state on the microscale. Even after the system reaches a disordered state, the enthalpy contribution cannot be totally ignored, which is reflected by the uphill diffusion of Ni towards Al. This demonstrates the combined effects of entropy and enthalpy on the phase formation in HEAs at elevated temperatures. Considering the homologous temperature for different equimolar alloys reveals that a multicomponent configuration does not stabilize the disordered state, while the mixing enthalpies between atomic pairs have a large impact on the transition temperature from ordered to disordered state. Finally, it is shown that surface modification of the HEA can be realized through a combination of film deposition and annealing processes. Compared to the HEA matrix, the formation of intermetallic compounds results in a hard surface layer. After the system becomes disordered, the higher hardness of the film side compared to the matrix can be attributed to the lattice distortion induced by Al.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
2. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
3. A hexagonal close-packed high-entropy alloy: the effect of entropy10.1016/j.matdes.2016.01.149 ↗
4. An understanding of high entropy alloys from phase diagram calculations
5. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
6. Physical metallurgy of high-entropy alloys
7. Alloy design strategies and future trends in high-entropy alloys
8. High-entropy alloys: a critical assessment of their founding principles and future prospects10.1080/09506608.2016.1180020 ↗
9. Microstructure and properties of a refractory high-entropy alloy after cold working10.1016/j.jallcom.2015.07.209 ↗
10. Phase separation of metastable CoCrFeNi high entropy alloy at intermediate temperatures10.1016/j.scriptamat.2016.08.008 ↗
11. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
12. Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties10.1016/j.actamat.2017.09.035 ↗
13. Effects of Al addition on microstructure and mechanical properties of AlxCoCrFeNi High-entropy alloy10.1016/j.msea.2015.09.034 ↗
14. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
15. Mechanical properties of low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system10.1016/j.msea.2012.12.018 ↗
16. Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties10.1063/1.2734517 ↗
17. Effect of Zr content on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.matdes.2016.01.033 ↗
18. Phase stability as a function of temperature in a refractory high-entropy alloy10.1557/jmr.2018.223 ↗
19. Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures10.1016/j.jallcom.2013.11.084 ↗
20. Phase formation and thermal stability of CoCrFeNi and CoCrFeMnNi equiatomic high entropy alloys10.1016/j.jallcom.2018.09.342 ↗
21. Evidence for superplasticity in a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion10.1016/j.msea.2017.01.016 ↗
22. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
23. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
24. Effect of atomic size difference on the type of major intermetallic phase in arc-melted CoCrFeNix high-entropy alloys10.1016/j.jallcom.2016.10.286 ↗
25. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys10.1016/j.actamat.2013.01.042 ↗
26. Microstructure evolution and mechanical properties of diffusion bonding Al5(TiZrHfNb)95 refractory high entropy alloy to Ti2AlNb alloy10.1016/j.msea.2020.140610 ↗
27. Vacuum diffusion bonding of high-entropy Al0.85CoCrFeNi alloy to TiAl intermetallic10.1016/j.jmatprotec.2019.116455 ↗
28. Microstructure and mechanical properties of diffusion bonded joints of high-entropy alloy Al5(HfNbTiZr)95 and TC4 titanium alloy10.1016/j.jmrt.2021.02.003 ↗
29. Diffusion bonding of AlCoCrFeNi2.1 eutectic high entropy alloy to GH4169 superalloy10.1016/j.msea.2020.139843 ↗
30. Callister · 2018
31. Ni tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys10.1016/j.jallcom.2016.07.239 ↗
32. Effect of solid carburization on the surface microstructure and mechanical properties of the equiatomic CoCrFeNi high-entropy alloy10.1016/j.jallcom.2018.07.329 ↗
33. Laser cladding FeCrCoNiTiAl high entropy alloy coatings reinforced with self-generated TiC particles10.2351/1.4966052 ↗
34. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
35. On the origins and mechanisms of the indentation size effect
36. Micro- and nanoindentation techniques for mechanical characterisation of materials10.1179/174328006X102475 ↗
37. Paul · 2014
38. Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy10.1016/j.matdes.2022.110530 ↗
39. Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing10.1016/j.msea.2017.08.083 ↗
40. Heat treatment impacts the micro-structure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.jallcom.2016.05.034 ↗
41. Microstructure and properties of age-hardenable AlxCrFe1.5MnNi0.5 alloys10.1016/j.msea.2010.05.052 ↗
42. Microstructure and aging behaviour of Al5Cr32Fe35Ni22Ti6 high entropy alloy10.1179/1743284715Y.0000000025 ↗
43. Overview of intermetallic sigma phase precipitation in stainless steels10.5402/2012/732471 ↗
44. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
45. Microstructure and mechanical properties of non-equilibrium solidified CoCrFeNi high entropy alloy10.1016/j.matchemphys.2017.06.037 ↗
46. Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0 ≤ x ≤ 2) high-entropy alloys10.1016/j.jallcom.2009.08.090 ↗
47. Atomic scale analysis and phase separation understanding in a thermally aged Fe-20 at.%Cr alloy10.1016/j.jnucmat.2008.10.008 ↗
48. The Co-Cr-Mo (cobalt-chromium-molybdenum) system10.1007/s11669-005-0071-y ↗
49. Microstructural evolution, electrochemical and corrosion properties of AlxCoCrFeNiTiy high entropy alloys10.1016/j.matdes.2019.107698 ↗
50. Kinetics of short-range and long-range B2 ordering in FeCo
51. Magnetic structure in ordered FeCr10.1103/PhysRevB.60.56 ↗
52. On the boron effect in FeAl (B2) intermetallic alloys10.1016/S0921-5093(98)00923-X ↗
53. Physical and mechanical properties of the B2 compound NiAl10.1179/imr.1993.38.4.193 ↗
54. Melting behaviour and homogeneity range of B2 CoAl and updated thermodynamic description of the Al-Co system10.1016/j.intermet.2013.03.011 ↗
55. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
56. Study on σ phase in Fe–Al–Cr alloys10.3390/met9101092 ↗
57. Mechanically induced phase transformations of the sigma phase of nanograined and of coarse-grained near-equiatomic FeCr alloys10.1016/j.jallcom.2005.12.070 ↗
58. Significant hardening due to the formation of a sigma phase matrix in a high entropy alloy10.1016/j.intermet.2012.09.022 ↗
59. Criterion for sigma phase formation in Cr- and V-Containing high-entropy alloys10.1080/21663831.2013.831382 ↗
60. The atomic mechanism of the body-centred cubic to σ-phase transformation10.1107/S056773946800046X ↗
61. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
62. Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements10.1007/s11661-006-0234-4 ↗
63. Tracer diffusion in the Ni–CoCrFeMn system: transition from a dilute solid solution to a high entropy alloy10.1016/j.scriptamat.2018.09.011 ↗
64. Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys10.1016/j.actamat.2017.12.052 ↗
65. Near equiatomic FeCo alloys: constitution, mechanical and magnetic properties10.1016/j.pmatsci.2005.04.001 ↗
66. Massalski · 1986 · 1
67. The Cr-Ni-Zr (chromium-nickel-zirconium) system10.1007/s11669-010-9666-z ↗
68. The Fe-Ni system: thermodynamic modelling assisted by atomistic calculations10.1016/j.intermet.2010.02.026 ↗
69. Experimental determination of phase equilibria of Al-rich portion in the Al–Fe binary system10.1016/j.jallcom.2016.01.215 ↗
70. Aluminum-Chromium)10.1007/s11669-007-9225-4 ↗
71. A new strategy of tailoring strength and ductility of CoCrFeNi based high-entropy alloy10.1016/j.msea.2020.138940 ↗
72. Courtney · 2000 · vol. 2