journal article·2023-09

Surface hardening of Al0.1CoCrFeNi and Al0.5CoCrFeNi high-entropy alloys by low-temperature gaseous carburization

Yawei Peng, Han Duan, Yajian Feng, Jianming Gong, Marcel A.J. Somers

Intermetallics· Volume 160
Publisher page

Abstract

The effect of low-temperature gaseous carburization on Al xCoCrFeNi high-entropy alloys (HEAs) ( x = 0.1 and 0.5) was investigated. The results show that low-temperature gaseous carburization can be successfully applied to surface hardening of Al xCoCrFeNi HEAs. After carburization, a hardened case is formed in the surface region of HEAs, which shows that the maximum nano-hardness varies from 12.9 to 11.9 GPa and is accompanied by a case depth ranging from 16 to 10 μm when the Al content is changed from x = 0.1 (2.4 at.%) to x = 0.5 (11.1 at.%). The surface hardness originates from a hard carbide-free carbon-enriched case. For carburized Al 0.1 CoCrFeNi the case is a single-phase supersaturated interstitial solid solution of C atoms in FCC (expanded FCC). For carburized Al 0.5CoCrFeNi the case is a dual-phase and consists of expanded FCC phase and a supersaturated interstitial solid solution of C atoms in BCC (expanded BCC). Increasing the Al content reduces the potential for surface hardening by low-temperature gaseous carburization, because the Al-stabilized BCC phase has a relatively low capacity to dissolve C atoms, despite a high Cr content.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
4. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
5. High-entropy alloys: a critical assessment of their founding principles and future prospects10.1080/09506608.2016.1180020 ↗
6. Gao · 2016
7. Murty · 2019
8. Corrosion of AlxCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior10.1016/j.corsci.2017.02.019 ↗
9. The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures10.1016/j.intermet.2015.11.002 ↗
10. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
11. Microstructure and wear properties of nitrided AlCoCrFeNi high-entropy alloy10.1016/j.matchemphys.2017.05.029 ↗
12. Surface modification of plasma nitriding on AlxCoCrFeNi high-entropy alloys10.1016/j.jmst.2020.01.057 ↗
13. Effect of solid carburization on the surface microstructure and mechanical properties of the equiatomic CoCrFeNi high-entropy alloy10.1016/j.jallcom.2018.07.329 ↗
14. Structure and corrosion resistance of plasma nitrided stainless steel10.1179/sur.1985.1.2.131 ↗
15. Low temperature gaseous nitriding and carburising of stainless steel10.1179/174329405X68597 ↗
16. Carbon supersaturation due to paraequilibrium carburization: stainless steels with greatly improved mechanical properties10.1016/j.actamat.2005.11.029 ↗
17. Low-temperature carburised AISI 316L austenitic stainless steel: wear and corrosion behaviour10.1016/j.matdes.2012.02.019 ↗
18. Effect of low-temperature surface hardening by carburization on the fatigue behavior of AISI 316L austenitic stainless steel10.1016/j.msea.2019.138524 ↗
19. Stability of low-temperature-gaseous-carburization layer in AISI316L stainless steel at high temperature
20. Microstructural, mechanical, and corrosion properties of plasma-nitrided CoCrFeMnNi high-entropy alloys10.1016/j.surfcoat.2018.06.088 ↗
21. Surface modification of CoCrFeNi high entropy alloy by low-temperature gaseous carburization10.1016/j.matlet.2020.128896 ↗
22. The effect of plastic pre-strain on low-temperature surface carburization of AISI 304 austenitic stainless steel10.1016/j.surfcoat.2016.05.047 ↗
23. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
24. Cooling rate effect on microstructure and mechanical properties of AlxCoCrFeNi high entropy alloys10.1016/j.matdes.2017.07.008 ↗
25. Low-temperature plasma carburizing of AISI 420 martensitic stainless steel: influence of gas mixture and gas flow rate10.1016/j.surfcoat.2012.06.022 ↗
26. Sequential low-temperature plasma-assisted thermochemical treatments of the AISI 420 martensitic stainless steel10.1016/j.surfcoat.2021.127459 ↗
27. Investigation of the high-temperature oxidation behavior of the Al0.5CoCrFeNi high entropy alloy
28. Lattice expansion of carbon-stabilized expanded austenite10.1016/j.scriptamat.2010.05.031 ↗
29. Experimental and numerical analysis of residual stress in carbon-stabilized expanded austenite10.1016/j.scriptamat.2018.08.006 ↗
30. Reaktionstypen bei der Oxydation von Legierungen
31. Mittemeijer · 2015
32. Low temperature carburizing of stainless steels and the development of carbon expanded austenite10.1515/htm-2022-0001 ↗
33. Local mechanical properties of AlxCoCrCuFeNi high entropy alloy characterized using nanoindentation10.1016/j.intermet.2017.11.010 ↗