journal article·2019-10Open access

Examination of Ni-based superalloy/intermetallic diffusion couples containing multiphase regions

M.R. McGregor, M.E. Hancock, L. Pallett, W.J. Clegg

Intermetallics· Volume 113

Abstract

Increasing gas turbine operating temperatures are driving the development of novel coatings for niche applications. One such application is as an anchor phase material for use in the high-pressure turbine stage, for which NiAlTa alloys are a promising candidate. Extended exposure to the high temperatures of this environment can cause interdiffusion of elements between the coating and the underlying blade material. In this study, NiAlTa/CMSX-4 diffusion couples were investigated experimentally and computationally. The couples initially contained two two-phase regions ( γ + γ ' ) and ( β + τ 1 ). After heat treatment at 1100 °C, interdiffusion had caused the τ 1 Laves phase in the coating to transform to the τ 2 Heusler phase, and TCP precipitation was observed in the CMSX-4. A CALPHAD-based model, using Thermo-Calc and DICTRA, developed for this system was able to predict the concentration profiles across the diffusion couple at 1000 °C, with the presence of the predicted phases in the interdiffusion zone verified by x-ray diffraction. However, due to the limited diffusion data for intermetallic phases available in the kinetic database, the model predictions were poor at higher temperatures. In order for the development of intermetallic coatings to be aided by CALPHAD-based simulations, more kinetic data is needed for intermetallic phases than is available at present.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Effects of turbine tip clearance on gas turbine performance
2. Advanced coating systems for future shroudless turbines
3. 2014
4. Material needs for turbine sealing at high temperature10.1179/1743284714Y.0000000527 ↗
5. Kuznetsov · 1991 · vol. 3 · 1
6. Tensile behavior of a new single-crystal nickel-based superalloy (CMSX-4) at room and elevated temperatures10.1007/BF02654502 ↗
7. Advances in coating design for high- performance gas turbines10.1557/mrs2003.194 ↗
8. Diffusion cells and chemical failure of MCrAlY bond coats in thermal-barrier coating systems10.1023/A:1010369024142 ↗
9. DICTRA, a tool for simulation of diffusional transformations in alloys10.1361/105497100770340057 ↗
10. Application of thermodynamic and kinetic modeling to diffusion simulations in nickel-base superalloy systems10.4028/www.scientific.net/AMR.278.198 ↗
11. Examination of Ni-base superalloy diffusion couples containing multiphase regions10.1016/j.msea.2005.07.016 ↗
12. Modeling interdiffusion processes in CMSX-10/Ni diffusion couple10.1007/s11669-015-0444-9 ↗
13. Multiphase diffusion simulations in 1D using the DICTRA homogenization model
14. Simulation of reaction-diffusion between substrate and coating during vapor deposition processes
15. Thermo-Calc and DICTRA modelling of the β-phase depletion behaviour in CoNiCrAlY coating alloys at different Al contents10.1016/j.commatsci.2018.02.013 ↗
16. Effect of alloying elements in Ni-base substrate material on interdiffusion processes in MCrAlY-coated systems10.1016/j.surfcoat.2018.07.020 ↗
17. A new computational approach for modelling the microstructural evolution and residual lifetime assessment of MCrAlY coatings10.1179/0960340914Z.00000000063 ↗
18. Predicting the microstructural evolution in a multi-layered corrosion resistant coating on a Ni-base superalloy10.1080/09603409.2017.1396650 ↗
19. Simulating the effect of aluminizing on a CoNiCrAlY-coated Ni-base superalloy
20. Calculation of multicomponent tantalum based phase diagrams10.1016/0364-5916(91)90005-5 ↗
21. Interdiffusion and intrinsic diffusion in the NiAl (delta) phase of the Al-Ni system10.1007/BF02661819 ↗
22. Phenomenological treatment of diffusion in Al-Fe and Al-Ni alloys having B2-B.C.C. ordered structure10.1016/S1359-6454(99)00010-5 ↗
23. “Interdiffusion in the face-centred cubic phase of the Ni–Re, Ni–Ta and Ni–W systems between 900 and 1300°C10.1016/S0921-5093(99)00705-4 ↗
24. Interdiffusion in fcc Ni-X (X = Rh, Ta, W, Re and Ir) alloys10.1016/j.jallcom.2015.10.120 ↗
25. “Atomic mobilities in fcc Ni–rich NiX (X=Rh, Ta, W, Re, and Ir) systems
26. High-throughput measurement of the composition-dependent interdiffusivity matrices in Ni-rich fcc Ni-Al-Ta alloys at elevated temperatures10.1016/j.jallcom.2016.07.003 ↗
27. Experimental investigation and CALPHAD assessment of the eutectic trough in the system NiAl-Cr-Mo10.1007/s11669-016-0490-y ↗
28. TCNI8 Database version 8.1.
29. MOBNi3 Database version 3.1.
30. A homogenization approach to diffusion simulations applied to α + γ Fe-Cr-Ni diffusion couples10.1016/j.actamat.2006.01.020 ↗
31. A model for 1D multiphase moving phase boundary simulations under local equilibrium conditions
32. Unified treatment of Kirkendall shift and migration of phase interfaces10.1016/j.actamat.2005.10.022 ↗
33. The precipitation of topologically close-packed phases in rhenium-containing superalloys10.1016/S1359-6454(01)00265-8 ↗
34. The effect of TCP morphology on the development of aluminide coated superalloys10.1016/j.msea.2005.01.005 ↗
35. Al-Ni-Ta (Aluminum-Nickel-Tantalum)
36. High temperature deformation and oxidation resistance of NiAl based intermetallic compounds
37. Intermetallic NiAl-Ta alloys with strengthening Laves phase for high-temperature applications. I. Basic properties10.1016/S0966-9795(97)00031-9 ↗
38. Interdiffusion of the platinum-group metals in nickel at elevated temperatures10.1016/S1359-6454(03)00105-8 ↗