Mechanochemical synthesis and thermoelectric properties of TiFe2Sn Heusler alloy
Source abstract
Abstract
Abstract Heusler alloys have attracted much attention due to their low toxicity, mechanical and thermal stability, relative abundance, and potential for thermoelectric power generation. Herein, we demonstrate that TiFe2Sn full-Heusler alloy can be obtained by a mechanochemical synthesis of metal precursors followed by spark plasma sintering. It is shown that thus prepared samples exhibit the ordered structure (Heusler phase, MnCu2Al-type). The influence of processing parameters on microstructure, phase composition, and thermoelectric properties of TiFe2Sn is studied. The thermoelectric figure of merit of the sample fabricated under optimal mechanochemical processing parameters is comparable to that of TiFe2Sn synthesized using the conventional route. Thus, our results indicate that the mechanochemical synthesis is a facile, scalable, and cost-effective route for the preparation of TiFe2Sn Heusler alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Heusler alloys: electronic and magnetic properties · Advanced Thermoelectric Materials and Devices · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Realising the potential of thermoelectric technology: a Roadmap10.1039/C9TC05710B ↗
2. Perspectives of high-temperature thermoelectric applications and p-type and n-type Aluminoborides10.1007/s11837-016-2069-9 ↗
3. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
4. Thermoelectric materials and applications for energy harvesting power generation10.1080/14686996.2018.1530938 ↗
5. Ioffe · 1957
6. Advances in thermoelectric materials research: looking back and moving forward10.1126/science.aak9997 ↗
7. Recent developments in Earth-abundant copper-sulfide thermoelectric materials10.1063/1.5119345 ↗
8. n-Type skutterudites (R,Ba,Yb)yCo4Sb12 (R=Sr, La, Mm, DD, SrMm, SrDD) approaching ZT≈2.010.1016/j.actamat.2013.09.039 ↗
9. Layered oxygen-containing thermoelectric materials: mechanisms, strategies, and beyond, Mater
10. 2016
11. Simple rules for the understanding of Heusler compounds10.1016/j.progsolidstchem.2011.02.001 ↗
12. Engineering half-Heusler thermoelectric materials using Zintl chemistry10.1038/natrevmats.2016.32 ↗
13. Mechanical properties of half-Heusler alloys10.1016/j.actamat.2016.01.031 ↗
14. Effect of Ti substitution on the thermoelectric properties of (Zr,Hf)NiSn half-Heusler compounds10.1063/1.1868063 ↗
15. (V,Nb)-doped half Heusler alloys based on {Ti,Zr,Hf}NiSn with high ZT10.1016/j.actamat.2017.03.071 ↗
16. Phase separation as a key to a thermoelectric high efficiency10.1039/C2CP43946H ↗
17. Half-Heusler alloys for efficient thermoelectric power conversion10.1007/s11664-016-4810-0 ↗
18. High thermoelectric figure of merit by resonant dopant in half-Heusler alloys
19. Thermoelectric high ZT half-Heusler alloys Ti1−x−yZrxHfyNiSn (0 ≤ x ≤ 1; 0 ≤ y ≤ 1)10.1016/j.actamat.2015.11.022 ↗
20. Realizing high figure of merit in heavy-band p-type half-Heusler thermoelectric materials10.1038/ncomms9144 ↗
21. Thermoelectric Half-Heusler compounds TaFeSb and Ta1-xTixFeSb (0 ≤ x ≤ 0.11): formation and physical properties10.1016/j.intermet.2019.04.011 ↗
22. Achieving high power factor and output power density in p-type half-Heuslers Nb1-x TixFeSb10.1073/pnas.1617663113 ↗
23. Unique role of refractory Ta alloying in enhancing the figure of merit of NbFeSb thermoelectric materials10.1002/aenm.201701313 ↗
24. Band engineering of high performance p-type FeNbSb based half-Heusler thermoelectric materials for figure of merit zT > 110.1039/C4EE03042G ↗
25. Enhancing the figure of merit of heavy-band thermoelectric materials through hierarchical phonon scattering10.1002/advs.201600035 ↗
26. Fe-based semiconducting Heusler alloys10.1134/S1063782617060136 ↗
27. Structural and thermoelectric properties of ternary full-heusler alloys10.1007/s11664-016-4944-0 ↗
28. Thermal and transport properties of the Heusler-type Fe2VAl1−xGex (0≤x≤0.20) alloys: effect of doping on lattice thermal conductivity, electrical resistivity, and Seebeck coefficient10.1103/PhysRevB.74.115115 ↗
29. High thermoelectric power factor near room temperature in full-heusler alloys10.1007/s11664-008-0626-x ↗
30. Electronic transport in Heusler-type Fe2VAl1−xMx alloys (M = B, In, Si)10.1103/PhysRevB.77.224415 ↗
31. Thermoelectric performance of a metastable thin-film Heusler alloy10.1038/s41586-019-1751-9 ↗
32. Significant off-stoichiometry effect leading to the N-type conduction and ferromagnetic properties in titanium doped Fe2VAl thin films10.1016/j.actamat.2020.09.067 ↗
33. Observation of enhanced thermopower due to spin fluctuation in weak itinerant ferromagnet10.1126/sciadv.aat5935 ↗
34. Thermal and transport properties of the Heusler-type compounds Fe2−xTi1+xSn10.1063/1.1776639 ↗
35. Large Seebeck coefficients of Fe2TiSn and Fe2TiSi: first-principles study10.7567/APEX.6.025504 ↗
36. Low-dimensional transport and large thermoelectric power factors in bulk semiconductors by band engineering of highly directional electronic states10.1103/PhysRevLett.114.136601 ↗
37. Magnetic and transport properties in Heusler-type Fe2TiSn compound10.1016/S0921-4526(02)02472-9 ↗
38. Weak ferromagnetism induced by atomic disorder in Fe2TiSn10.1103/PhysRevB.62.3296 ↗
39. Mechanochemical synthesis of intermetallic compounds10.1070/RC2001v070n01ABEH000598 ↗
40. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
41. Mechanochemistry and mechanical activation of solids10.1070/RC2006v075n03ABEH001205 ↗
42. Experimental investigation of milling regimes in planetary ball mill and their influence on structure and reactivity of gasless powder exothermic mixtures10.1016/j.powtec.2015.01.009 ↗
43. High-energy ball milling of nonstoichiometric compounds10.3367/UFNe.2019.06.038581 ↗
44. Programs for X-ray analysis of polycrystals10.1007/BF02471306 ↗
45. Diffusion in mechanical alloying10.1016/S0924-0136(96)02826-9 ↗
46. Sherif · 2015
47. Phase transformations in nanocrystalline alloys synthesized by mechanical alloying10.1023/B:JMSC.0000039180.66006.0f ↗
48. On the reactive sintering of Heusler Fe2VAl-based thermoelectric compounds10.1016/j.intermet.2020.106890 ↗
49. A review of multi-physical fields induced phenomena and effects in spark plasma sintering: fundamentals and applications10.1016/j.matdes.2020.108662 ↗
50. Thermoelectric properties of heusler Fe2TiSn alloys
51. On the formation of ternary phases in the Ti–Fe–Sn ternary system at 773 K10.30970/cma6.0232 ↗
52. Magnetic properties of heusler type alloys M2XSn (M = Fe, Co or Ni, X = Ti or V)10.1016/S0022-3697(72)80437-2 ↗
53. Magnetic and thermoelectric properties of Fe–Ti–Sn alloys
54. Thermoelectric performance and the role of anti-site disorder in the 24-electron Heusler TiFe2Sn10.1088/1361-648X/aa81e7 ↗
55. Preparation and study of the thermoelectric properties of Fe2TiSn1–xSix Heusler alloys10.1134/S1063782617070363 ↗
56. Influence of V Doping on the thermoelectric properties of Fe2Ti1-xVxSn heusler alloys10.1134/S1063782619060277 ↗
57. Theoretical modeling of the thermoelectric properties of Fe2Ti1–xVxSn heusler alloys10.1134/S1063782619070030 ↗
58. Crystal structure of new heusler compounds10.1002/zaac.200900036 ↗
59. Webster · 1968
60. Mössbauer effect study of atomic disorder in Fe2TiSn alloy
61. Electron-correlation effects in a disordered Fe2TiSn Heusler alloy10.1088/0022-3727/39/5/S12 ↗
62. Ueber die Wärme-Leitungsfähigkeit der Metalle (in German)10.1002/andp.18531650802 ↗
63. Characterization of Lorenz number with Seebeck coefficient measurement10.1063/1.4908244 ↗
64. Heat flow and lattice vibrations in glasses10.1016/0038-1098(89)90630-3 ↗
65. Boosting the thermoelectric performance of Fe2VAl−type Heusler compounds by band engineering10.1103/PhysRevB.103.085202 ↗
66. The electronic pseudo band gap states and electronic transport of the full-Heusler compound Fe2VAl10.1039/D0TC05187J ↗