journal article·2022-03

Short-term corrosion behavior of polycrystalline Ni3Al-based superalloy in sulfur-containing atmosphere

Chang Liu, Haomin Feng, Yikai Yang, Enkuan Zhang, Jian Ding, Jiahang Dai, Xingchuan Xia, Ying Tang, Chong Li, Xueguang Chen, Kaihong Song, Yongchang Liu

Intermetallics· Volume 142
Publisher page

Abstract

Harsh service environment especially in sulfur-containing atmosphere and complex structures of dominant γ` + γ dendrite, interdendritic region and interface region have significant effect on service life of polycrystalline Ni 3 Al-based superalloys. In this work, hot corrosion behavior of polycrystalline Ni 3 Al-based superalloy in sulfur-containing atmosphere was studied at 900 °C. Growth behaviors of corrosion products were analyzed by X-ray Photoelectron Spectroscopy, Raman spectrometer, Scanning Electron Microscope and Transmission Electron Microscope. The results showed that the growth behaviors of corrosion products were different in different regions. Corrosion products in interdendritic regions were Ni 3S 2 and Al 2O 3. While, as for dominant γ` + γ dendrite and interface regions, corrosion products were mainly composed of Ni 3S 2, Cr 3S 4 and mixed oxides. However, though the corrosion products are similar in composition, they have different growth mechanism. Spatial structure and precipitates were observed to analyze and explain the reasons for difference of corrosion behaviors in different regions.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Precipitation and growth behavior of mushroom-like Ni3Al10.1016/j.matlet.2017.09.033 ↗
2. The effect of shear strains on grain size in the Ni3Al intermetallic compound synthesized under pressure10.1016/j.mechmat.2021.103988 ↗
3. Improving cyclic oxidation resistance of Ni3Al-based single crystal superalloy with low-diffusion platinum-modified aluminide coating10.1016/j.jmst.2020.05.007 ↗
4. Microstructure evolution behavior of Ni3Al (γ') phase in eutectic γ-γ' of Ni3Al-based alloy10.1016/j.intermet.2018.04.010 ↗
5. Study on high temperature deformation behavior of WC-10 wt% Ni3Al cemented carbide10.1016/j.jallcom.2019.153156 ↗
6. The effect of long term high temperature annealing on twinning and detwinning of the wrought Ni3Al-based alloy10.1016/j.matchar.2017.09.015 ↗
7. Effect of initial microstructure on the hot deformation behavior of a Ni3Al-based alloy10.1016/j.intermet.2019.106584 ↗
8. Effect of annealing treatment on microstructure evolution and creep behavior of a multiphase Ni3Al-based superalloy10.1016/j.msea.2018.11.126 ↗
9. Cyclic oxidation behavior of Ni3Al-based superalloy10.1016/j.vacuum.2019.108938 ↗
10. Precipitation and growth behavior of γ' phase in Ni3Al-based superalloy under thermal exposure10.1007/s10853-019-03821-0 ↗
11. Cyclic oxidation behavior of Ni3Al-basedsuperalloy10.1016/j.vacuum.2019.108938 ↗
12. Deformation behavior and processing maps of Ni3Al-based superalloy during isothermal hot compression10.1016/j.jallcom.2017.04.116 ↗
13. Natesan · 2002 · vol. 3
14. Effect of laser shock peening on the hot corrosion behavior of Ni-based single-crystal superalloy at 750 °C10.1016/j.corsci.2021.109419 ↗
15. Influence of alloying elements on hot corrosion resistance of nickel-based single crystal superalloys coated with Na2SO4 salt at 900 °C10.1016/j.matdes.2020.109197 ↗
16. Influence of heat treatment on resistance to electrochemical corrosion of the strain-hardened strips made of the Ni3Al phase based alloys10.1016/S1644-9665(12)60092-2 ↗
17. Elucidation of orientation relations between Fe-Cr alloys and corrosion products after high temperature SO2 corrosion10.1016/j.corsci.2020.108809 ↗
18. Effect of pre-oxidation on hot corrosion of a nickel-base superalloy
19. High-temperature corrosion of an Fe-Ni-based alloy HR6W under various conditions at 750 °C and 810 °C: effect of the temperature, water vapor, simulated ash and SO210.1016/j.matchemphys.2020.123670 ↗
20. Hot corrosion mechanism of intermetallic compound Ni3Al10.1016/S0254-0584(01)00567-3 ↗
21. Precipitation behavior of spherical γ' phase in eutectic area of Ni3Al-based alloy10.1002/adem.201801318 ↗
22. Vermicular Ni3S2-Ni(OH)2 heterostructure supported on nickel foam as efficient electrocatalyst for hydrogen evolution reaction in alkaline solution
23. Sn-doped nickel sulfide (Ni3S2) derived from bimetallic MOF with ultra high capacitance10.1016/j.jallcom.2020.157798 ↗
24. XPS analysis of the interface of ceramic thin films for humidity sensors10.1016/0169-4332(93)90459-O ↗
25. An XPS study of the electronic structure of the ZnxSd1-xCr2(X=S, Se) spinel system10.1016/0022-3697(89)90487-3 ↗
26. 3D hierarchical flower-like NiMoO4@Ni3S2 composites on Ni foam for high-performance battery-type supercapacitors10.1016/j.jpcs.2020.109697 ↗
27. High-valent bimetal Ni3S2/Co3S4 induced by Cu doping for bifunctional electrocatalytic water splitting10.1016/j.apcatb.2021.120225 ↗
28. Self-standing, hybrid three-dimensional-porous MoS2/NiS2 foam electrocatalyst for hydrogen evolution reaction in alkaline medium10.1016/j.ijhydene.2020.12.014 ↗
29. Fabrication of Ni3S2 nanoneedle-sheets electrode material with ultrahigh areal capacity of over 15 mAh cm-210.1016/j.matlet.2020.128716 ↗
30. McCreery · 2000
31. Study of Raman spectra for γ-Al2O3 models by using first-principles method10.1016/j.ssc.2013.09.030 ↗
32. Zhang · 2019 · 1
33. Interaction of Ta and Cr on Type-I hot corrosion resistance of single crystal Ni-based superalloys10.1016/j.corsci.2017.01.011 ↗
34. High temperature properties of several chromium-containing Co-based alloys reinforced by different types of MC carbides (M=Ta, Nb, Hf and/or Zr)10.1016/j.jallcom.2009.03.091 ↗
35. Understanding imprint formation, plastic instabilities and hardness evolutions in FCC, BCC and HCP metal surfaces10.1016/j.actamat.2021.117122 ↗
36. Directional coarsening behavior of primary γ' phase in Ni3Al-based superalloy during aging heat treatment10.1016/j.jallcom.2021.159674 ↗
37. 2010
38. Preparation of Ni3Al intermetallic compound and its corrosion resistance
39. Isothermal oxidation behavior of micro-regions in multiphase Ni3Al-based superalloys10.1016/j.matchar.2020.110748 ↗
40. High temperature corrosion behavior of GH3625 alloy under acidic atmosphere SO2
41. High temperature corrosion of pure chromium in CO-CO2-SO2-N2 atmospheres10.1016/0010-938X(94)90004-3 ↗
42. Vasilyev F, Kobylin P, Roine A, HSC Chemistry, V. 10, January 2020, Research Software, Metso Outotec, Finland.10.1016/S1365-6937(20)30348-8 ↗
43. Isothermal oxidation behavior of a cast Ni3Al-base superalloy MX 246A10.1016/S1006-706X(08)60052-7 ↗
44. On oxide formation on a single crystalline Ni-based superalloy at 900 °C in SO2 containing atmosphere: the effect of surface treatment10.1016/j.corsci.2020.109154 ↗
45. The hot corrosion of nickel-based ternary alloys and superalloys for gas turbine applications-I. corrosion in SO2/O2 atmospheres10.1016/0010-938X(87)90071-0 ↗
46. Sulphide formation after pre-oxidation of chromia formers10.1016/S0010-938X(96)00069-8 ↗
47. High temperature corrosion of metallic materials in composed oxidizing environments
48. Hot-corrosion behavior associated with the evolution of corrosion scales of a Ni-based superalloy in molten salts10.1016/j.pnsc.2021.04.004 ↗
49. Effects of Al and Ta on the high temperature oxidation of Ni-based superalloys10.1016/j.corsci.2014.10.025 ↗