Revealing the effects of cooling rate on soft magnetic properties of (Fe0·9Co0·1)86Ni1B13 amorphous alloy
Source abstract
Abstract
Cooling rate is the key factor affecting soft magnetic properties of amorphous ribbons. So, is the faster the cooling rate conducive to better soft magnetic performance as theoretical hypotheses? The uncertainty of the debate on this issue in practical application motivates the present work. (Fe 0.9Co 0.1) 86Ni 1B 13 amorphous ribbons with different thicknesses were prepared by deliberately varying the cooling rate. It was found that the amorphous ribbon prepared at a lower cooling rate exhibits better soft magnetic properties than the one prepared at a higher cooling rate. The reasons behind the improvement of the soft magnetic properties of amorphous ribbons were investigated in this work. The results prove that cooling rate strongly affect the surface morphology and residual stress of amorphous ribbons and thus the magnetic structure and properties of amorphous ribbons. On the premise of ensuring the formation of amorphous structure, high surface quality and low defects density of the ribbon prepared at low cooling rate promise candidates for the potential application in electric devices rather than the ribbons prepared at a high cooling rate.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Tailoring soft magnetic properties of Fe-based amorphous alloys through C addition10.1016/j.pnsc.2020.02.001 ↗
2. Composition design of high Bs Fe-based amorphous alloys with good amorphous-forming ability10.1016/j.jallcom.2015.09.216 ↗
3. Magnetic properties and promising cryogenic magneto-caloric performances of Gd20Ho20Tm20Cu20Ni20 amorphous ribbons
4. Achievement of giant cryogenic refrigerant capacity in quinary rare-earths based high-entropy amorphous alloy10.1016/j.jmst.2021.06.028 ↗
5. Large refrigerant capacity induced by table-like magnetocaloric effect in amorphous Er0.2Gd0.2Ho0.2Co0.2Cu0.2 ribbons10.1080/21663831.2018.1471749 ↗
6. The effects of magnetic field intensity on the magnetic properties of Fe80Si9B11 amorphous alloys during magnetic annealing10.1016/j.intermet.2021.107200 ↗
7. Thermal, magnetic and mechanical behavior of large-sized Fe-based amorphous alloy ribbons by twin-roll strip casting10.1016/j.intermet.2021.107144 ↗
8. Soft magnetic FeSiBPCu heteroamorphous alloys with high Fe content10.1063/1.3060579 ↗
9. Fe-based bulk metallic glasses: glass formation, fabrication, properties and applications10.1016/j.pmatsci.2019.01.003 ↗
10. Influence of the preparation cooling rate on crystallization kinetics of Fe74Mo6P13C7 amorphous alloys10.1016/j.jnoncrysol.2017.09.012 ↗
11. Influence of production method on the magnetic parameters and structure of Fe61Co10Y8Nb1B20 amorphous alloys in the as-quenched state10.1016/j.jallcom.2014.03.028 ↗
12. Influence of the production method of Fe61Co10Y8W1B20 amorphous alloy on the resulting microstructure and hyperfine field distribution10.1016/j.jallcom.2014.12.136 ↗
13. Extremely high BS (Fe1-xCox)86Ni1B13 amorphous soft magnetic alloys with good bending ductility10.1016/j.intermet.2020.106959 ↗
14. Effect of surface crystallization on magnetic properties of Fe82Cu1Si4B11.5Nb1.5 nanocrystalline alloy ribbons10.1016/j.jmmm.2017.04.086 ↗
15. Magnetic softness and magnetization dynamics of FeSiBNbCu(P,Mo) nanocrystalline alloys with good high-frequency characterization10.1016/j.jmmm.2019.01.116 ↗
16. Analysis of the coercivity of amorphous ferromagnetic alloys10.1016/0304-8853(82)90167-6 ↗
17. Origin of low coercivity of Fe-(Al, Ga)-(P, C, B, Si, Ge) bulk glassy alloys10.2320/matertrans.44.2020 ↗
18. Maintaining high saturation magnetic flux density and reducing coercivity of Fe-based amorphous alloys by addition of Sn10.1016/j.jnoncrysol.2019.119710 ↗
19. Bulk metallic glasses: smaller is softer10.1063/1.2696502 ↗
20. Origin of low coercivity of (Fe0.75B0.15Si0.10)100−xNbx (x=1–4) glassy alloys10.1063/1.2158587 ↗
21. Quasi-dislocation dipole-type defects and low coercivity of Fe-based soft magnetic glassy alloys
22. Magnetic structure of deformation-induced shear bands in amorphous Fe80B16Si4 observed by magnetic force microscopy10.1063/1.369802 ↗
23. Development of soft magnetic amorphous alloys with distinctly high Fe content10.1007/s11433-017-9051-6 ↗
24. Shear-band affected zone revealed by magnetic domains in a ferromagnetic metallic glass10.1038/s41467-018-06919-2 ↗
25. Magnetic domains in amorphous metal ribbons10.1063/1.335490 ↗
26. Correlation between soft-magnetic properties and Tx1-Tc in high Bs FeCoSiBPC amorphous alloys10.1016/j.jallcom.2015.11.044 ↗
27. Significant improvement of soft magnetic properties for Fe(Co)BPSiC amorphous alloys by magnetic field annealing10.1016/j.jallcom.2018.01.311 ↗