Investigations on the microstructures and tribological behaviors of as-cast CrFeCoNiCux high entropy alloys
Source abstract
Abstract
In this work, the microstructures and tribological properties of as-cast CrFeCoNiCu x (x = 0, 0.5 and 1.0) HEAs were studied in details. Experimental results revealed that t he addition of Cu could lead to formation of Cu-rich phase existing in the inter-dendrite region. The friction coefficient of the Cu-free HEA increased with the sliding duration, and a trend of increasing first and then decreasing was acquired in the Cu-containing HEAs. An increase in the sliding duration changed the wear mechanism from micro-cutting to oxidation wear. The results of finite element analysis indicated that a significant tensile stress was generated on the local regions of the worn surface, thus leading to the initiation of cracks and the spalling of the tribo-oxide layer. There were obvious piling-ups along the edge of the wear track as the material flow was obstructed. Moreover, the thickness of the tribo-oxide layer increased quasi-linearly with sliding duration, indicating its forming mechanism of diffusion-controlled. The dislocations generated within the tribologically-deformed subsurface were considered as the high diffusion pathways.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Alloy design strategies and future trends in high-entropy alloys10.1007/s11837-013-0761-6 ↗
4. Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
5. Anomalous decrease in X-ray diffraction intensities of Cu–Ni–Al–Co–Cr–Fe–Si alloy systems with multi-principal elements10.1016/j.matchemphys.2007.01.003 ↗
6. Local atomic structure of a high-entropy alloy: an X-ray and neutron scattering study10.1007/s11661-012-1474-0 ↗
7. High-temperature tensile deformation behavior of hot rolled CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2017.09.293 ↗
8. Hot deformation behavior of CoCrFeMnNi FCC high entropy alloy10.1016/j.matchemphys.2017.06.062 ↗
9. The role of carbon in grain refinement of cast CrFeCoNi high-entropy alloys10.1007/s11661-018-4549-8 ↗
10. Strengthening FCC-CoCrFeMnNi high entropy alloys by Mo addition10.1016/j.jmst.2018.10.009 ↗
11. Engineering multi-scale B2 precipitation in a heterogeneous FCC based microstructure to enhance the mechanical properties of a Al0.5Co1.5CrFeNi1.5 high entropy alloy10.1016/j.jallcom.2020.154707 ↗
12. Phase stability and kinetics of σ-phase precipitation in CrMnFeCoNi high-entropy alloys10.1016/j.actamat.2018.09.040 ↗
13. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
14. Influence of Cr content on the microstructure and mechanical properties of CrxFeNiCu high entropy alloys10.1016/j.pnsc.2020.01.012 ↗
15. Precipitation and its strengthening of Cu-rich phase in CrMnFeCoNiCux high-entropy alloys10.1016/j.msea.2017.12.060 ↗
16. Effect of Cu on the strengthening and embrittling of an FeCoNiCr-xCu HEA10.1016/j.msea.2021.142413 ↗
17. Microstructure and mechanical properties of face‐centered‐cubic‐based Cr‐free equiatomic high‐entropy alloys10.1002/adem.202000848 ↗
18. Microstructure and mechanical properties of Al x Si 0.2 CrFeCoNiCu 1−x high-entropy alloys10.1016/j.matdes.2015.11.013 ↗
19. Influence of Cu content on high temperature oxidation behavior of AlCoCrCuxFeNi high entropy alloys (x = 0; 0.5; 110.1016/j.intermet.2016.12.015 ↗
20. High temperature wear in CoCrFeNiCux high entropy alloys: the role of Cu10.1016/j.scriptamat.2018.10.007 ↗
21. Liquid-phase separation in undercooled CoCrCuFeNi high entropy alloy10.1016/j.intermet.2017.03.021 ↗
22. Semi-solid processing of the CoCrCuFeNi high entropy alloy10.1016/j.matdes.2017.01.082 ↗
23. Tribological behavior of an AlCoCrFeNi2.1 eutectic high entropy alloy sliding against different counterfaces10.1016/j.triboint.2020.106599 ↗
24. Overview no. 55 Wear-Mechanism maps10.1016/0001-6160(87)90209-4 ↗
25. Explicit equations for the stresses beneath a sliding spherical contact
26. Liquid phase separation and rapid dendritic growth of high-entropy CoCrCuFeNi alloy10.1016/j.intermet.2016.07.003 ↗
27. High diffusivity pathways govern massively enhanced oxidation during tribological sliding10.1016/j.actamat.2021.117353 ↗
28. The role of atmospheres and lubricants in the oxidational wear of metals10.1016/S0301-679X(02)00034-8 ↗
29. Origins of folding instabilities on polycrystalline metal surfaces10.1103/PhysRevApplied.2.064004 ↗
30. Stages in the tribologically-induced oxidation of high-purity copper10.1016/j.scriptamat.2018.05.008 ↗
31. The origin of surface microstructure evolution in sliding friction10.1016/j.scriptamat.2018.04.048 ↗