journal article·2012-12

Controlling grain boundary character distribution of high-temperature B2 phase in Ti–Ni–Fe alloy

Seiichiro Ii, Mitsuhiro Matsuda, Tomomasa Matsui, Towako Fujimoto, Akinori Kakisaka, Takafumi Kikutake, Sadahiro Tsurekawa, Ken-ichi Ikeda, Minoru Nishida

Intermetallics· Volume 31
Publisher page

Abstract

Abstract A method is proposed for controlling the grain boundary character distribution of high-temperature B2 phase in Ti–Ni–Fe alloys. The method utilizes the lattice correspondence between the deformation twins in B19′ martensite and the residual planar defects in the B2 parent phase. The optimal conditions for recrystallization and additional annealing of the tensile-deformed specimen with residual strain of about 20% were determined to be 873 K for 0.9 ks and 773 K for 3.6 ks, respectively. In the specimen annealed under these optimal conditions, over 90% of grain boundaries were coincidence boundaries with Σ ≤ 27. In particular, 33% of the grain boundaries were low-angle boundaries, that is, Σ1 boundaries. The atomic structures of the Σ9 coincidence grain boundaries and the Σ1 low-angle boundaries were observed by high-angle annular dark field scanning transmission electron microscopy. The atomic structure of these boundaries was explained well by theoretical predictions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Otsuka · 1998
2. Deformation behavior of NiTi-based alloys10.1007/BF02661822 ↗
3. Transmission pseudoelasticity and deformation behavior in a Ti-50.6at%Ni alloy10.1016/0036-9748(81)90346-X ↗
4. Mechanisms of the As temperature increase by pre-deformation of an equiatomic TiNi alloy10.2320/matertrans1989.34.919 ↗
5. New deformation twinning mode of B19’ martensite in Ti-Ni shape memory alloy10.1016/S1359-6462(98)00366-2 ↗
6. Microstructure modifications by tensile deformation in Ti-Ni-Fe alloy
7. Tensile properties of NiAl and NiTi
8. Physical metallurgy of Ti-Ni based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
9. Crystallography of deformation twin boundaries in a B2 type Ti-Ni alloy10.1016/j.msea.2006.03.111 ↗
10. Interaction between microstructure and multiple-step transformation in binary NiTi alloys using in-situ transmission electron microscopy observations10.1080/01418619808241907 ↗
11. The mechanism of multistage martensitic transformations in aged Ni-rich NiTi shape memory alloys10.1016/S1359-6454(01)00385-8 ↗
12. Ni4Ti3-precipitation during aging of NiTi shape memory alloys and its influence on martensitic phase transformations10.1016/S1359-6454(02)00257-4 ↗
13. Origin of abnormal multi-stage martensitic transformation behavior in aged Ni-rich Ti-Ni shape memory alloys10.1016/j.actamat.2004.06.002 ↗
14. Effect of heat treatment atmosphere on multistage R-phase transformation in an aged Ti-51.0at%Ni alloy10.2320/matertrans.47.645 ↗
15. Secondary recrystallization in copper
16. Direct evidence of correlation between {201¯}B19’ and {114}B2 defromation twins in Ti-Ni shape memory alloy10.1016/S1359-6462(03)00356-7 ↗
17. Approach to grain boundary design for strong and ductile polycrystals
18. The control of brittleness and development of desirable mechanical properties in polycrystalline systems by grain boundary engineering10.1016/S1359-6454(99)00275-X ↗
19. Structure-dependent intergranular oxidation in Ni-Fe polycrystalline alloy10.1016/S1359-6454(99)00007-5 ↗
20. Twinning-related grain boundary engineering10.1016/j.actamat.2004.05.031 ↗
21. Atomic resolution Z-contrast imaging of interfaces10.1016/0956-7151(92)90275-J ↗
22. Observation of rare-earth segregation in silicon nitride ceramics at subnanometre dimensions10.1038/nature02410 ↗
23. Transmission electron microscopy of antiphase boundary-like structure of B19’ martensite in Ti-Ni shape memory alloy10.1016/j.actamat.2010.09.017 ↗
24. The structure of high-angle grain boundaries10.1016/0001-6160(66)90168-4 ↗
25. Grain boundary energy and structure of α-Fe<110> symmetric tilt boundary10.2355/tetsutohagane1955.86.5_357 ↗
26. Read · 1953
27. CsCl-Type ordered structures in binary alloys of transition elements