journal article·2018-02

The influence of high-energy ball milling on the heterogeneous reaction kinetics in the Ti-Si system

A.A. Nepapushev, A.S. Rogachev, A.S. Mukasyan

Intermetallics· Volume 93
Publisher page

Abstract

Abstract The high-temperature (1300–1600 K) kinetics for the Ti-Si reactive system were investigated using electro-thermal analysis. The influence of short-term (1–3 min) high-energy ball milling (HEBM) of Ti+0.6Si heterogeneous powder mixtures on the kinetic parameters was also studied. It was shown that HEBM leads to a significant decrease of the apparent activation energy (Ea) of the solid-state reaction between silicon and titanium. For the non-milled mixture, Ea is 339 ± 63 kJ/mol, while after 3 min of HEBM it drops more than twice to 148 ± 12 kJ/mol. The reaction initiation temperature also decreases with an increase of HEBM time: from 1467 ± 62 K for the pristine mixture to 1110 ± 42 K after 3 min of mechanical treatment. The conclusion was made that a decrease of crystalline size and an increase of the crystal lattice defect concentration, which in combination enhance the grain boundary diffusion, can be responsible for the high reactivity of the mechanically activated mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Electromagnetic Effects on Materials · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Novel materials synthesis by mechanical alloying/milling10.1179/imr.1998.43.3.101 ↗
2. Preparation of multicomponent oxides by mechanochemical methods10.1007/s10853-012-6909-x ↗
3. Fabrication of polymer nanocomposites via ball milling: present status and future perspectives10.1016/j.pmatsci.2017.01.003 ↗
4. Functionalized graphene nanoplatelets from ball milling for energy applications10.1016/j.coche.2016.01.003 ↗
5. Metastable Co3C nanocrystalline powder produced via reactive ball milling: synthesis and magnetic properties10.1016/j.jallcom.2016.03.095 ↗
6. Direct combustion synthesis of silicon carbide nanopowder from the elements10.1111/jace.12107 ↗
7. Combustion synthesis of mechanically activated powders in the Ta-Si system10.1016/j.jallcom.2004.03.142 ↗
8. Combination of mechanochemical activation and self-propagating behaviour for the synthesis of Ti aluminides10.1016/S0921-5093(03)00566-5 ↗
9. The effect of mechanical treatment on the rate and limits of combustion in SHS processes
10. Self-sustaining reactions induced by ball milling10.1016/S0079-6425(01)00002-0 ↗
11. Solid-flame: experimental validation10.1016/j.combustflame.2015.10.025 ↗
12. Ni/Al energetic nanocomposites and the solid flame phenomenon10.1021/acs.jpcc.6b09754 ↗
13. Kinetics of mechanically activated high temperature synthesis of Ni 3Al in the thermal explosion mode10.1016/j.intermet.2010.11.028 ↗
14. Kinetics of high temperature reaction in Ni-Al system: influence of mechanical activation10.1021/jp1018586 ↗
15. Combustion of mechanically activated heterogeneous systems10.1007/s10573-005-0038-7 ↗
16. Mechanoactivation of SHS systems and processes10.3103/S1061386207010062 ↗
17. Synthesis of nanostructured materials by mechanical milling: problems and opportunities10.1016/S0965-9773(97)00014-7 ↗
18. Effect of mechanical activation on SHS: physicochemical mechanism10.3103/S1061386208040018 ↗
19. Influence of high-energy ball milling on reaction kinetics in the Ni-Al system: an electrothermorgaphic study10.3103/S1061386215010082 ↗
20. Reactive Ni/Al nanocomposites: structural characteristics and activation energy10.1021/acs.jpca.6b12314 ↗
21. Influence of the high energy ball milling on structure and reactivity of the Ni + Al powder mixture10.1016/j.jallcom.2013.06.114 ↗
22. Macrokinetics of high-temperature heterogeneous reactions: SHS aspects10.1351/pac199264070965 ↗
23. Kinetics of combustion in the layered Ni-Al system10.1080/00102200108907837 ↗
24. Microstructures and properties of high melting point intermetallic Ti5Si3 and TiSi2 compounds10.1016/0921-5093(92)90081-B ↗
25. Formation and thermal stability of amorphous Ti-Si alloys10.2320/matertrans1989.36.797 ↗
26. Murarka · 1993
27. Some principles of combustion of titanium-silicon mixtures10.1007/BF00785326 ↗
28. On the mechanism of structure formation during combustion synthesis of titanium silicides10.1080/00102209508951895 ↗
29. Influence of reaction mixture porosity on the effective kinetics of gasless combustion synthesis10.1021/ie9704915 ↗
30. Reaction synthesis of titanium silicides via self-propagating reaction kinetics10.1111/j.1151-2916.1998.tb02574.x ↗
31. Formation of titanium silicides Ti5Si3 and TiSi2 by self-propagating combustion synthesis10.1016/j.jallcom.2006.05.131 ↗
32. Experimental investigation of milling regimes in planetary ball mill and their influence on structure and reactivity of gasless powder exothermic mixtures10.1016/j.powtec.2015.01.009 ↗
33. Kinetics study in Ti-Fe2O3 system by electro-thermal explosion method10.1016/j.ijthermalsci.2014.06.008 ↗
34. The scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
35. Combustion of heterogeneous nanostructural systems (Review)10.1007/s10573-010-0036-2 ↗
36. The laws of thermal explosion in the systems with additional nonchemical source of heat
37. Kinetic analysis of temperature profiles of pyrotechnic systems10.1016/0010-2180(86)90005-2 ↗
38. Theory of combustion waves in homogeneous media10.1016/0360-1285(88)90006-8 ↗
39. Kinetic analysis of the combustion synthesis of molybdenum and titanium silicides10.1007/BF02653880 ↗
40. An experimental study on Ti5Si3 formation by combustion synthesis in self-propagating mode10.1016/j.jallcom.2004.11.051 ↗
41. Combustion synthesis of mechanically activated powders in the Ti–Si system10.1557/JMR.2001.0149 ↗