journal article·2020-03

Microstructural characterization of YSZ-CoNiCrAlY two-layered thermal barrier coating formed on γ-TiAl intermetallic alloy via APS process

Saeed Nouri, Saeid Sahmani, Masoud Asayesh, Mohammad Mohammadi Aghdam

Intermetallics· Volume 118
Publisher page

Abstract

Abstract With the aid of development in materials science in recent years, γ-TiAl alloys have been extensively utilized to reduce mass density and enhance mechanical characteristics of gas turbine blades used in the last stage of low pressure part. In the current study, the γ-TiAl alloy with chemical composition of Ti-48Al-2Nb–2Cr (at. %) is employed as the substrate material. Two different coatings including a single-layer coating applied via Co-based powder of AMDRY 995C [CoNiCrAlY] and a two-layered TBC coating consisted of a ceramic top coat of YSZ and a metallic bond coat of CoNiCrAlY using APS process at 2000 °C . Microstructural analysis as well as the isothermal oxidation resistance of the both obtained coatings at 1050 °C is investigated. For the two-layered TBC coating, it is demonstrated that the dominant compounds include ZrO2 oxide with a little amount of Y2O3 oxide. The presence of these oxides plays the essential role in high temperature oxidation resistance of the formed TBC coating on the γ-TiAl alloy. Furthermore, it is revealed that the best high temperature oxidation resistance is obtained by the two-layered TBC coating on the γ-TiAl substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. High temperature materials for aerospace applications: Ni-based superalloys and γ-TiAl alloys10.1016/j.crhy.2018.10.002 ↗
2. Enhanced high-temperature tensile property by gradient twin structure of duplex high-Nb-containing TiAl alloy10.1016/j.actamat.2018.09.007 ↗
3. Nonlinear bending and instability analysis of bioceramics composed with magnetite nanoparticles: fabrication, characterization, and simulation10.1016/j.ceramint.2018.02.175 ↗
4. Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy10.1016/j.actamat.2018.02.013 ↗
5. Vibrations of beam-type implants made of 3D printed bredigite-magnetite bio-nanocomposite scaffolds under axial compression: application, communication and simulation10.1016/j.ceramint.2018.03.173 ↗
6. Nonlinear resonance response of porous beam-type implants corresponding to various morphology shapes for bone tissue engineering applications10.1007/s11665-018-3619-9 ↗
7. Oxidation behavior of protective Ti-Al-Cr based coatings applied on the γ-TiAl alloys Ti-48-2-2 and TNM-B110.1016/j.surfcoat.2018.05.067 ↗
8. Analytical and experimental analyses for mechanical and biological characteristics of novel nanoclay bio-nanocomposite scaffolds fabricated via space holder technique10.1016/j.clay.2018.08.013 ↗
9. Synergistic effect of B and Y on the isothermal oxidation behavior of TiAl-Nb-Cr-V alloy10.1016/j.corsci.2017.12.013 ↗
10. Mechanical and biological performance of axially loaded novel bio-nanocomposite sandwich plate-type implant coated by biological polymer thin film10.1016/j.jmbbm.2018.08.030 ↗
11. Microstructures and mechanical properties of directionally solidified C-containing γ-TiAl alloys via electromagnetic cold crucible10.1016/j.intermet.2019.106587 ↗
12. Effect of copper oxide nanoparticles on electrical conductivity and cell viability of calcium phosphate scaffolds with improved mechanical strength for bone tissue engineering10.1140/epjp/i2019-12375-x ↗
13. Friction and wear properties of a high Nb-containing TiAl alloy against WC-8Co, Si3N4, and GCr15 in an unlubricated contact10.1016/j.intermet.2018.11.019 ↗
14. Nonlinear resonance investigation of nanoclay based bio-nanocomposite scaffolds with enhanced properties for bone substitute applications10.1016/j.jallcom.2018.09.211 ↗
15. Effect of Nb additions on microstructure and properties of γ-TiAl based alloys fabricated by selective laser melting10.1016/S1003-6326(19)65009-0 ↗
16. Influence of MgO nanoparticles on the mechanical properties of coated hydroxyapatite nanocomposite scaffolds produced via space holder technique: fabrication, characterization and simulation10.1016/j.jmbbm.2019.03.014 ↗
17. Phase constituent control and correlated properties of titanium aluminide intermetallic alloys through dual-wire arc additive manufacturing10.1016/j.matlet.2019.01.112 ↗
18. Mechanical properties improvement of Al–Li 8090 alloy by using the new proposed method of directional quenching
19. High-temperature sliding wear behavior of an intermetallic γ–based TiAl alloy10.1016/j.wear.2018.11.025 ↗
20. Study on the oxidation resistance of γ-TiAl intermetallic alloy coated via different diffusion coating processes10.1088/2053-1591/ab36d5 ↗
21. Improvement of high-temperature oxidation resistance of γ-TiAl intermetallic alloy by YSZ-NiCoCrAlY coating using APS process10.1088/2053-1591/ab56ab ↗
22. High temperature compressive flow behavior and associated microstructural development in a β-stabilized high Nb-containing γ-TiAl based alloy10.1016/j.jallcom.2019.02.207 ↗
23. Nonlocal strain gradient nonlinear resonance of bi-directional functionally graded composite micro/nano-beams under periodic soft excitation10.1016/j.tws.2019.106226 ↗
24. The creep behavior of a fully lamellar γ-TiAl based alloy10.1016/j.intermet.2019.106611 ↗
25. Nonlocal strain gradient nonlinear primary resonance of micro/nano-beams made of GPL reinforced FG porous nanocomposite materials
26. Improved oxidation performance of TiAl alloy by a novel Al–Si composite coating10.1016/j.surfcoat.2019.125126 ↗
27. Calcium phosphate-PLA scaffolds fabricated by fused deposition modeling technique for bone tissue applications: fabrication, characterization and simulation10.1016/j.ceramint.2019.09.238 ↗
28. Anodic characteristics and electrochemical machining of two typical γ-TiAl alloys and its quantitative dissolution model in NaNO3 solution10.1016/j.electacta.2019.135429 ↗
29. Surface elastic shell model for nonlinear primary resonant dynamics of FG porous nanoshells incorporating modal interactions10.1016/j.ijmecsci.2019.105203 ↗
30. Influence of alloying transition metals on structural, elastic, electronic and optical behaviors of γ-TiAl based alloys: a comparative DFT study combined with data mining technique10.1016/j.matchemphys.2019.122455 ↗
31. Microstructure refinement via martensitic transformation in TiAl alloys10.1016/j.jallcom.2018.01.216 ↗
32. Brittle–ductile transition during creep in nearly and fully lamellar high-Nb TiAl alloys10.1016/j.intermet.2017.11.009 ↗
33. Microstructure stability and micro-mechanical behavior of as-cast gamma-TiAl alloy during high-temperature low cycle fatigue10.1016/j.actamat.2017.12.040 ↗
34. High-temperature torsion induced gradient microstructures in high Nb-TiAl alloy10.1016/j.matlet.2017.07.124 ↗
35. TiAl alloys in commercial aircraft engines10.1080/09603409.2016.1183068 ↗
36. Microstructure control of Ti 45Al 8.5 Nb (W, B, Y) alloy during the solidification process10.1016/j.actamat.2016.04.021 ↗
37. Development of β-solidifying γ-TiAl alloys sheet10.1016/j.matlet.2017.03.173 ↗
38. Modeling concepts for intermetallic titanium aluminides10.1016/j.pmatsci.2016.01.001 ↗
39. High temperature oxidation behavior of Ti (Al, Si)3 diffusion coating on γ-TiAl by cold spray10.1016/S1003-6326(16)64214-0 ↗
40. Microstructural investigation of Si -modified aluminide coating formed on γ-TiAl alloy by the slurry method10.1007/s13632-015-0190-8 ↗
41. Characterization of Si-aluminide coating and oxide scale microstructure formed on γ-TiAl alloy during long-term oxidation at 950° C10.1016/j.intermet.2017.04.015 ↗
42. High temperature oxidation protection of γ-titanium aluminide using (Cr, Al) ON coatings deposited by high-speed physical vapor deposition10.1016/j.surfcoat.2017.09.071 ↗
43. Microstructure and oxidation behavior of a SiC-Al2O3-glass composite coating on Ti-47Al-2Cr-2Nb alloy10.1016/j.corsci.2014.06.015 ↗
44. Microstructure and mechanical properties of precision cast TiAl turbocharger wheel10.1016/j.jmatprotec.2005.03.019 ↗
45. Effect of Cr addition on the properties of aluminide coating layers formed on TiAl alloys10.1016/S0257-8972(01)01716-9 ↗
46. Effects of Nb addition on oxidation behavior of TiAl10.1016/0966-9795(95)94254-C ↗
47. Microstructure and oxidation behavior of Cr/Mo modified TiAl alloy containing high Nb
48. High temperature oxidation of Ti–46Al–6Nb–0.5 W–0.5 Cr–0.3 Si–0.1 C alloy10.1016/j.intermet.2016.04.005 ↗
49. The isothermal and cyclic high temperature oxidation behaviour of Ti–48Al–2Mn–2Nb compared with Ti–48Al–2Cr–2Nb and Ti–48Al–2Cr10.1016/S0966-9795(98)00076-4 ↗
50. Oxidation behaviour of Ti–46.7 Al–1.9 W–0.5 Si in air and Ar–20% O2 between 750 and 950°C10.1016/j.corsci.2004.08.014 ↗
51. Two-step Cr and Al diffusion coating on TiAl at high temperatures10.1016/S0966-9795(02)00233-9 ↗
52. An Al+ Y coating process for improvement of the high-temperature oxidation resistance of a TiAl alloy10.1023/A:1010399825117 ↗
53. Protectiveness of a CVD-Al2O3 film on TiAl intermetallic compound against high-temperature oxidation10.2320/matertrans1989.32.299 ↗
54. Preparation and characterization of Cr/CrC multilayer on γ-TiAl alloy by the double glow plasma surface alloying technology10.1016/j.matlet.2017.12.104 ↗
55. Al-Si and Al-Si-Y coatings deposited by HS-PVD for the oxidation protection of γ-TiAl10.1016/j.surfcoat.2018.06.074 ↗
56. Enhanced high temperature oxidation resistance for γ-TiAl alloy with electrodeposited SiO2 film10.1016/j.corsci.2018.05.025 ↗
57. Microstructure and oxidation resistance of Si modified aluminide coating on TiAl based alloys10.1179/1743294414Y.0000000411 ↗
58. Reproducibility of the single-phase structural state of the multielement high-entropy Ti-V-Zr-Nb-Hf system and related superhard nitrides formed by the vacuum-arc method10.1134/S1063785012070127 ↗
59. Microstructures and residual strain/stresses of YSZ coatings prepared by plasma spraying10.1016/j.matlet.2018.12.126 ↗
60. High temperature indentation tests of YSZ coatings in air up to 1200°C10.1016/j.matlet.2017.07.091 ↗
61. A comparative study of oxidation kinetics and thermal cyclic performance of thermal barrier coatings (TBCs)10.1016/j.surfcoat.2018.12.082 ↗
62. Oxidation behavior of a nanostructured compositionally graded layer (CGL) thermal barrier coating (TBC) deposited on IN-738LC10.1016/j.surfcoat.2019.06.024 ↗
63. Bose · 2018 · 199