journal article·2020-09

Effects of isothermal aging on interfacial microstructure evolution and shear behavior of Au-12Ge/Ni(P)/Kovar Solder Joints

Yufeng Huang, Xun Chen, Feng Xue, Tong Wu, Wensheng Liu, Yunzhu Ma, Siwei Tang

Intermetallics· Volume 124
Publisher page

Abstract

Abstract Au-12Ge(wt.%) eutectic solder is widely used in electronic packaging thanks to its good electrical conductivity, solderability, and chemical stability. To investigate the stability of Au-12Ge solder during high-temperature service, the effects of different isothermal aging conditions on the microstructure and performance of Au/Ni(P)/Kovar substrate after soldering were investigated. Solder joints produced at 400 °C for 1 min showed excellent wetting behavior with NiGe/Ni5Ge3/Ni3(P,Ge) intermetallic layers formed at the interface. The thickness of generated interfacial intermetallic compounds was estimated to only 1.56 μm due to the amorphous nature of Ni-P coating that hindered the diffusion of Ni atoms. As aging increased with time and temperature, the interfacial intermetallic compounds grow further, leading to deterioration and failure of solder joints. The growth mechanism of interfacial intermetallic compounds was then examined, and activation energy was estimated to 95.4 kJ/mol. In turn, shear strength of solder joints declined and fracture mode became brittle as aging time and temperature increased. Meanwhile, fracture position evolved from IMC layer to Ni-P layer. At aging temperatures above 290 °C, Ni-P layer showed crystallization transition to porous Ni3P, leading to formation of holes and cracks, and resulting in exfoliation of coating with Kovar substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Improving the mechanical performance of Sn57.6Bi0.4Ag solder joints on Au/Ni/Cu pads during aging and electromigration through the addition of tungsten (W) nanoparticle reinforcement10.1016/j.msea.2016.05.092 ↗
2. Effects of Ni-coated carbon nanotubes addition on the microstructure and mechanical properties of Sn–Ag–Cu solder alloys10.1016/j.msea.2013.10.008 ↗
3. Reliability of Au-Ge and Au-Si eutectic solder alloys for high-temperature electronics10.1007/s11664-012-2114-6 ↗
4. Development of Au–Ge based candidate alloys as an alternative to high-lead content solders10.1016/j.jallcom.2009.10.108 ↗
5. Development of high-temperature solders: Review10.1016/j.microrel.2012.02.018 ↗
6. The microstructure of ultrafine eutectic Au-Sn solder joints on Cu10.1007/s11664-000-0170-9 ↗
7. Interfacial reactions and shear strength on Cu and electrolytic Au/Ni metallization with Sn-Zn solder10.1557/jmr.2006.0198 ↗
8. Formation of alternating interfacial layers in Au-12Ge/Ni joints10.1038/srep04557 ↗
9. Solid state interfacial reaction of Sn–37Pb and Sn–3.5Ag solders with Ni–P under bump metallization10.1016/j.actamat.2003.12.042 ↗
10. Wetting and soldering behavior of eutectic Au-Ge alloy on Cu and Ni substrates10.1007/s11664-011-1639-4 ↗
11. Low temperature TLP bonding of Al2O3–ceramics using eutectic Au–(Ge,Si) alloys10.1007/s10853-013-7526-z ↗
12. Nickel dissolution into AuGe in alloyed AuGe/Ni/Au Ohmic contacts on GaAs/AlGaAs multilayer structures10.1016/j.tsf.2010.04.119 ↗
13. Interfacial microstructure evolution and shear behavior of Au–12Ge/Ni solder joints during isothermal aging10.1007/s10854-016-5974-3 ↗
14. Experimental investigation and thermodynamic modeling of the Au-Ge-Ni system10.1007/s00706-012-0772-y ↗
15. Characterization of the isothermal solidification process in the Ni/Au–Ge layer system10.1007/s10853-015-8952-x ↗
16. Comparison of interfacial reactions of Ni and Ni-P in extended contact with liquid Sn-Bi-based solders10.1016/j.actamat.2006.09.003 ↗
17. ChemInform abstract: systems Ni-Ge-P10.1002/chin.199532023 ↗
18. Solid-State interfacial reaction between eutectic Au−Ge solder and Cu/Ni(P)/Au metalized ceramic substrate and its suppression10.1016/j.jmst.2014.10.010 ↗
19. Origin and evolution of voids in electroless Ni during soldering reaction10.1016/j.actamat.2012.02.018 ↗
20. Impurity and alloying effects on interfacial reaction layers in Pb-free soldering10.1016/j.mser.2009.12.001 ↗
21. Interfacial reaction mechanism and kinetics between Au–20Sn and Sn10.1007/s10854-016-4520-7 ↗
22. Interfacial structure and growth kinetics of intermetallic compounds between Sn-3.5Ag solder and Al substrate during solder process10.1016/j.jallcom.2016.04.263 ↗
23. Elimination of voids in reactions between Ni and Sn: a novel effect of silver10.1016/j.scriptamat.2011.10.032 ↗