journal article·2022-12Open access

Unusual phase transformation and novel hardening mechanisms upon impact loading in a medium entropy alloy with dual heterogeneous structure

Zihan Zhang, Yan Ma, Shuang Qin, Jian Wang, Muxin Yang, Ping Jiang, Xiaolei Wu, Fuping Yuan

Intermetallics· Volume 151

Abstract

Dynamic shear properties and corresponding deformation mechanisms of a CrCoNi-based medium entropy alloy (MEA) with both coherent nanoprecipitate and heterogeneous grain structure were investigated utilizing hat-shaped specimens in Hopkinson-bar and microstructure characterization. The present MEA with dual heterogeneous structure is found to have extraordinary dynamic shear properties, as compared to the other advanced metals and alloys, including the CrCoNi MEA with similar heterogeneous grain structure while with single FCC phase. A formula for considering effects of strain hardening, strain rate and thermal softening was utilized to calculate the critical shear strain for onset of adiabatic shear band for the present MEA, and the experimental results were found to be well predicted by the theoretical estimations. The formations of microscopic shear bands with low-angle grain boundary type, nano-grains, deformation twins, stacking fault network, and Lomer-Cottrell locks were found to be responsible for the multiple strain hardening mechanisms during dynamic shear deformation for both unaged and aged samples. An unusual phase transformation (γ→σ) was observed for only aged samples under dynamic shear loading, which was not found under quasi-static conditions before, should have significant contribution on strain hardening due to the precipitation by-passing hardening by the hard σ nano-particles.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
4. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
5. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
6. Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy10.1038/ncomms15719 ↗
7. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
8. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
9. High-entropy alloys10.1038/s41578-019-0121-4 ↗
10. Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae10.1038/s41467-019-08460-2 ↗
11. Enhancing strength-ductility synergy in an ex situ Zr-based metallic glass composite via nanocrystal formation within hign-entropy alloy particles10.1016/j.matdes.2021.110108 ↗
12. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
13. The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy10.1016/j.actamat.2017.04.033 ↗
14. Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing10.1016/j.scriptamat.2017.02.042 ↗
15. Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures10.1016/j.actamat.2018.02.016 ↗
16. High impact toughness of CrCoNi medium-entropy alloy at liquid-helium temperature10.1016/j.scriptamat.2019.07.010 ↗
17. Ultrastrong medium-entropy single-phase Alloys designed via severe lattice distortion10.1002/adma.201807142 ↗
18. Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys10.1073/pnas.1808660115 ↗
19. Deformation nanotwins suppress shear banding during impact test of CrCoNi medium-entropy alloy10.1016/j.scriptamat.2019.12.017 ↗
20. Deformation induced hcp nano-lamella and its size effect on the strengthening in a CoCrNi medium-entropy alloy10.1016/j.jmst.2020.12.017 ↗
21. Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength10.1073/pnas.1807817115 ↗
22. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways10.1038/s41467-019-11464-7 ↗
23. Short-range order and its impact on the CrCoNi medium-entropy alloy10.1038/s41586-020-2275-z ↗
24. Short-range chemical order and local lattice distortion in a compositionally complex alloy10.1016/j.actamat.2020.04.034 ↗
25. Effects of lattice distortion and chemical short-range order on the mechanisms of deformation in medium entropy alloy CoCrNi10.1016/j.actamat.2020.08.044 ↗
26. Direct observation of chemical short-range order in a medium-entropy alloy10.1038/s41586-021-03428-z ↗
27. Chemical medium-range order in a medium-entropy alloy10.1038/s41467-022-28687-w ↗
28. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
29. Extraordinary strain hardening by gradient structure10.1073/pnas.1324069111 ↗
30. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗
31. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
32. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
33. Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy10.1038/s41467-020-16085-z ↗
34. High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys10.1038/s41467-018-06600-8 ↗
35. Enhanced tensile properties by heterogeneous grain structures and coherent precipitates in a CoCrNi-based medium entropy alloy10.1016/j.msea.2021.142440 ↗
36. Designing structures with combined gradients of grain size and precipitation in high entropy alloys for simultaneous improvement of strength and ductility10.1016/j.actamat.2022.117847 ↗
37. Coherent precipitation and strengthening in a dual-phase AlNi2Co2Fe1.5Cr1.5 high-entropy alloy10.1016/j.msea.2019.138241 ↗
38. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
39. Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy10.1016/j.scriptamat.2019.01.034 ↗
40. Mechanism-based strain gradient crystal plasticity—I10.1016/j.jmps.2004.08.008 ↗
41. Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
42. Dynamic behavior and microstructure characterization of TaNbHfZrTi high-entropy alloy at a wide range of strain rates and temperatures10.1016/j.ijmecsci.2020.105738 ↗
43. High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: remarkable resistance to shear failure
44. Strain rate dependent shear localization and deformation mechanisms in the CrMnFeCoNi high-entropy alloy with various microstructures10.1016/j.msea.2020.139854 ↗
45. Twin-coupled shear bands in an ultrafine-grained CoCrFeMnNi high-entropy alloy deformed at 77K10.1080/21663831.2022.2053220 ↗
46. Shear band-driven precipitate dispersion for ultrastrong ductile medium-entropy alloys10.1038/s41467-021-25031-6 ↗
47. Superior mechanical properties and deformation mechanisms of heterogeneous laminates under dynamic shear loading10.1016/j.msea.2019.04.082 ↗
48. Enhanced quasi-static and dynamic shear properties by heterogeneous gradient and lamella structures in 301 stainless steels10.1016/j.msea.2016.10.111 ↗
49. Influence of shock prestraining on the formation of shear localization in 304 stainless steel10.1007/s11661-005-0239-4 ↗
50. Development of adiabatic shear bands in annealed 316L stainless steel: Part I. Correlation between evolving microstructure and mechanical behavior10.1007/BF02586217 ↗
51. Dynamic shear response and evolution mechanisms of adiabatic shear band in an ultrafine-grained austenite–ferrite duplex steel10.1016/j.mechmat.2015.06.004 ↗
52. Study of adiabatic localized shear in metals by split Hopkinson pressure bar method10.1051/epjconf/20101000029 ↗
53. Thermo-viscoplastic behavior and constitutive modeling of pure copper under high-strain-rate shear condition10.1016/j.mechmat.2018.12.007 ↗
54. Effect of preloading on the formation of adiabatic localized shear in copper10.1134/S0010508213050146 ↗
55. Behaviour of Cu-Zn alloys in high speed shear tests and in chip formation processes10.1016/j.msea.2004.12.030 ↗
56. Dynamic behavior of HIPed Ti–6Al–4V10.1016/j.ijimpeng.2006.01.006 ↗
57. Catastrophic thermoplastic shear10.1115/1.3629585 ↗
58. A plastic constitutive equation incorporating strain, strain-rate, and temperature10.1016/j.ijplas.2010.02.005 ↗
59. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
60. A study of dislocation junctions in FCC metals by an orientation dependent line tension model10.1016/S1359-6454(02)00356-7 ↗
61. Role of stress-induced martensitic transformation in TRIP effect of metastable austenitic steels10.1016/j.jallcom.2011.11.071 ↗
62. Crack-resistant σ/FCC interfaces in the Fe40Mn40Co10Cr10 high entropy alloy with the dispersed σ-phase10.1016/j.msea.2021.142039 ↗
63. Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds10.1016/j.actamat.2018.12.010 ↗
64. Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates10.1016/j.ijplas.2017.10.005 ↗
65. Growth kinetics of σ-phase precipitates and underlying diffusion processes in CrMnFeCoNi high-entropy alloys10.1016/j.actamat.2020.08.023 ↗