Diffusion behavior of iron and samarium atoms in Sm2Fe17 alloy compound layer
Source abstract
Abstract
The Sm 2Fe 17 alloy compound has been widely studied and used as a precursor for Sm 2Fe 17N x rare-earth permanent magnets. However, the growth mechanism of Sm 2Fe 17 remains unclear. In this study, based on the high temperature diffusion method, a Sm 2Fe 17 layer was prepared by fabricating a Sm–Fe (sat)/Fe(s) diffusion couple in the temperature range of 1060–1140 °C. Results indicated that the diffusion of Fe and Sm atoms is the rate-determining step in the growth of the Sm 2Fe 17 layer. The atomic concentrations of Fe and Sm in samples with different holding times at 1060–1140 °C were analyzed using an electron microprobe, which revealed that the growth of the Sm 2Fe 17 layer primarily depended on the diffusion of Fe atoms. The diffusion coefficients of Fe atoms in the Sm 2Fe 17 layer were 2.33 × 10 −9, 4.29 × 10 −9, and 5.37 × 10 −9 cm 2 s −1 at 1060, 1100, and 1140 °C, respectively. Moreover, the relationship between the diffusion coefficient of Fe atoms (D Fe) and temperature (T) was obtained.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Hydrogen Storage and Materials · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Improved magnetic properties by treatment of iron-based rare earth intermetallic compounds in ammonia10.1016/0304-8853(90)90756-G ↗
2. Research on the magnetic material of Sm-Fe matrix nitrides
3. Recent advances in pseudobinary iron based permanent magnets10.1179/imr.1995.40.4.137 ↗
4. Hard magnetic properties of anisotropic Sm-Fe-N magnets produced by compression shearing method10.1016/j.jmmm.2011.03.022 ↗
5. Bonded thin cylinder magnets using Sm-Fe-N anisotropic powder10.1109/TMAG.2005.854871 ↗
6. Current status and recent topics of rare-earth permanent magnets10.1088/0022-3727/44/6/064001 ↗
7. Cobalt-rare earth intermetallic compounds produced by calcium hydride reduction of oxides
8. Mössbauer investigation of amorphous Sm–Fe–B ribbons under applied field10.1016/S0925-8388(02)01088-5 ↗
9. High coercivity Sm-Fe melt-spun ribbon10.1063/1.3068545 ↗
10. Production of Sm-Fe-N bulk magnets by spark plasma sintering method10.1016/j.jmmm.2014.06.034 ↗
11. Highly dense and thin composite-bonded magnets with spherical fine powder10.1016/j.jmmm.2006.10.1073 ↗
12. Explosive consolidation of Sm–Fe–N and Sm–Fe–N/(Ni, Co) magnetic powders10.1016/j.jmmm.2006.10.1078 ↗
13. Magnetic properties of Sm(Fe, Ti) 7Cx Nδ/α-Fe nanocomposites10.1016/S0925-8388(01)01673-5 ↗
14. Anodic dissolution of U, Zr and U-Zr alloy and convolution voltammetry of Zr4+/Zr2+ couple in the molten LiCl-KCl eutectic10.1016/j.electacta.2011.06.027 ↗
15. Electrochemical formation of Nd–Ni alloys in molten NaCl–KCl–NdCl310.1016/j.electacta.2013.01.049 ↗
16. Electrochemical formation of Dy–Ni alloys in molten NaCl–KCl–DyCl310.1016/j.electacta.2013.05.095 ↗
17. Electrodeposition of tungsten from Li2WO4-Na2WO4-K2WO4 based melts10.5796/electrochemistry.77.621 ↗
18. Electrodeposition of tungsten from ZnCl2-NaCl-KCl-KF-WO3 melt and investigation on tungsten species in the melt10.1016/j.electacta.2009.10.021 ↗
19. Electrodeposition of RE–TM (RE = La, Sm, Gd; TM = Fe, Co, Ni) films and magnetic properties in urea melt10.1016/j.jallcom.2008.10.157 ↗
20. Preparation and characterization of Sm2Fe17 alloy in LiF-CaF2 -SmF3 molten salt10.1016/j.jallcom.2018.03.048 ↗
21. Electrochemical behavior for preparation of Sm2Fe17 in CaCl2-CaF2-SmCl3 system10.1016/j.jallcom.2019.03.094 ↗
22. The diffusion couple technique in phase diagram determination10.1016/S0925-8388(00)01487-0 ↗
23. Solid state diffusion and reactive phase formation10.1016/S0167-2738(96)00550-4 ↗
24. F.J.J. van Loo , A.A. Kodentsov, Interfacial chemistry: react ions in inorganic systems, Pure Appl. Chem. https://doi.org/10.1351/pac199870020501.10.1351/pac199870020501 ↗
25. Formation of Sm–Fe intermetallic compounds by the reduction-diffusion process with CaH210.2320/matertrans1989.33.1163 ↗
26. Diffusion behavior of lanthanum in γ phase grain boundary of Fe-based alloy
27. Concepts derived from phase diagram studies for the strengthening of Fe–Al-based alloys10.1016/j.intermet.2004.10.015 ↗
28. Yan · 2018
29. Study on the binary intermetallic compounds in the Mg–Ce system10.1016/j.intermet.2009.01.002 ↗
30. Stoichiometry study on the binary compounds in the Mg–Ce system—Part I10.1016/j.jallcom.2008.07.042 ↗
31. Effect of Ti on morphology and growth of Zn–Fe intermetallic phases10.1080/10426914.2015.1037896 ↗
32. Dybkov · 2002
33. Diffusion research in BCC Ti-Al-Ni ternary alloys10.1007/s11669-017-0544-9 ↗
34. Microstructure and diffusion behaviors of the diffusion bonded Mg/Al joint10.1515/htmp-2016-0023 ↗
35. Fe2+ diffusion in CVD ZnSe during annealing in different (Ar, Zn, and Se) atmospheres10.1134/S0020168519120124 ↗
36. Massalski · 1990
37. Growth behavior of compound layers during reactive diffusion between solid Cu and liquid Al10.1016/j.msea.2006.09.047 ↗
38. Study on Fe–Al layers of Fe/(Zn-11%Al-3%Mg-0.2%Si) solid–liquid diffusion couples10.1080/10426914.2017.1328117 ↗
39. Growth characterization of intermetallic compound at the Ti/Al solid state interface10.3390/ma12030472 ↗
40. Ti and Si diffusion in rutile10.2138/am-2019-7030 ↗
41. Al diffusion in quartz10.2138/am-2018-5613 ↗