journal article·2024-04Open access

Multistage strain hardening facilitated by in-situ TiO(C) nanoparticles in CoCrFeMnNi high entropy nanocomposite subjected to high strain rate compression

Zhen Zhang, Yuehuang Xie, Jiamiao Liang, Yang Zhou, Sammy Lap Ip Chan, Jun Wang

Intermetallics· Volume 167

Abstract

Second phase nanoparticles have been notable reinforcements to enhance strength of high entropy alloys based on Orowan mechanism, but their contributions to improving strain hardening ability through facilitating deformation behaviors are still unclear. In this study, an in-situ TiO(C) nanoparticles reinforced CoCrFeMnNi high entropy nanocomposite was fabricated through powder metallurgy routes. The microstructure subjected to high strain rate compression was investigated to elucidate the deformation behaviors facilitated by TiO(C) nanoparticles and the corresponding contributions to strain hardening ability. The results demonstrated that stacking faults and nanotwins were triggered under the sufficient high flow stress facilitated by Orowan mechanism of TiO(C) nanoparticles. It is noted that a FCC to HCP phase transformation was only nucleated adjacent to TiO(C) nanoparticles due to extra stress concentration. These multiple deformation mechanisms including stacking faults, nanotwins and HCP phase transformation led to multistage strain hardening phenomenon, achieving a simultaneous increase of strength and ductility from 1487 MPa and 51.7% to 1735 MPa and 68.2% compared with CoCrFeMnNi high entropy alloy without nanoparticles.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Multicomponent high-entropy Cantor alloys10.1016/j.pmatsci.2020.100754 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
4. Multi-type dislocation substructure evolution in a high-strength and ductile duplex high-entropy nanocomposites10.1016/j.compositesb.2022.110322 ↗
5. Micro-laminated CoCrFeMnNi−TiNp/CoCrFeMnNi high-entropy alloy matrix composite with bimodal grain structure via multi-material selective laser melting (MM-SLM) additive manufacturing10.1016/j.coco.2022.101366 ↗
6. Grain growth and strengthening mechanisms of ultrafine-grained CoCrFeNiMn high entropy alloy matrix nanocomposites fabricated by powder metallurgy10.1016/j.jallcom.2019.152937 ↗
7. Grain refinement and localized amorphization of additively manufactured high-entropy alloy matrix composites reinforced by nano ceramic particles via selective-laser-melting/remelting10.1016/j.coco.2020.03.001 ↗
8. Multiple deformation mechanisms induced by pre-twinning in CoCrFeNi high entropy alloy10.1016/j.scriptamat.2021.114266 ↗
9. Microstructure and mechanical properties of ultrafine grained CoCrFeNi and CoCrFeNiAl0.3 high entropy alloys reinforced with Cr2O3/Al2O3 nanoparticles10.1016/j.msea.2021.141313 ↗
10. Fabrication of CoCrFeNiMn high entropy alloy matrix composites by thermomechanical consolidation of a mechanically milled powder10.1016/j.matchar.2019.01.002 ↗
11. Nitrogen interstitial alloying of CoCrFeMnNi high entropy alloy through reactive powder milling10.3390/e21040363 ↗
12. Grains, phases, and interfaces: an introduction of microstructure
13. Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures
14. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility10.1038/nmat3544 ↗
15. Enhanced tensile plasticity in ultrafine-grained metallic composite fabricated by friction stir process10.1016/j.scriptamat.2008.06.040 ↗
16. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
17. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum
18. High strain-rate compressive deformation behavior of the Al0. 1CrFeCoNi high entropy alloy10.1016/j.matdes.2015.07.161 ↗
19. High-entropy CoCrFeMnNi alloy subjected to high-strain-rate compressive deformation10.1016/j.matchar.2018.10.028 ↗
20. Dynamic deformation behavior of a face-centered cubic FeCoNiCrMn high-entropy alloy10.1016/j.scib.2018.01.022 ↗
21. Mechanical properties and microstructure of the CoCrFeMnNi high entropy alloy under high strain rate compression10.1007/s11665-016-2105-5 ↗
22. Influence of ordered L12 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy10.1038/s41598-019-42870-y ↗
23. Mechanical properties and microstructure of a NiCrFeCoMn high-entropy alloy deformed at high strain rates10.3390/e20110892 ↗
24. Strain rate effects of dynamic compressive deformation on mechanical properties and microstructure of CoCrFeMnNi high-entropy alloy10.1016/j.msea.2018.02.031 ↗
25. Dynamic mechanical responses of the Al0· 1CoCrFeNi high entropy alloy at cryogenic temperature10.1016/j.msea.2020.140125 ↗
26. Mechanical properties and microstructure of the Al0. 3CoCrFeNiTi0. 3 high entropy alloy under dynamic compression10.1016/j.msea.2021.141147 ↗
27. Influence of fine-scale B2 precipitation on dynamic compression and wear properties in hypo-eutectic Al0. 5CoCrFeNi high-entropy alloy10.1016/j.jallcom.2020.157126 ↗
28. Hierarchical nanotwins in Fe27Co24Ni23Cr26 high-entropy alloy subjected to high strain-rate Hopkinson bar deformation10.1016/j.matchar.2022.111737 ↗
29. Mechanical response and deformation behavior of Al0.6CoCrFeNi high-entropy alloys upon dynamic loading10.1016/j.msea.2018.05.001 ↗
30. High-velocity deformation of Al0. 3CoCrFeNi high-entropy alloy: remarkable resistance to shear failure
31. Exceptional high-strain-rate tensile mechanical properties in a CrCoNi medium-entropy alloy
32. Humphreys · 2012
33. Dislocation-induced breakthrough of strength and ductility trade-off in a non-equiatomic high-entropy alloy10.1016/j.actamat.2019.11.055 ↗
34. A novel nanostructure to achieve ultrahigh strength and good tensile ductility of a CoCrFeNiMn high entropy alloy10.1039/C9NR09512H ↗
35. Recent advances in hot working: fundamental dynamic softening mechanisms10.1007/BF02833651 ↗
36. S. Zhao, Z. Li, C. Zhu, W. Yang, Z. Zhang, E.J. Armstrong David, S. Grant Patrick, O. Ritchie Robert, A. Meyers Marc, Amorphization in extreme deformation of the CrMnFeCoNi high-entropy alloy, Sci. Adv. 7(5) eabb3108..10.1126/sciadv.abb3108 ↗
37. Strengthening methods in crystals10.1179/095066072790137701 ↗
38. Stacking fault energy of face-centered-cubic high entropy alloys10.1016/j.intermet.2017.10.004 ↗
39. Ultrahigh cryogenic strength and exceptional ductility in ultrafine-grained CoCrFeMnNi high-entropy alloy with fully recrystallized structure10.1016/j.mtnano.2018.12.002 ↗
40. Stacking fault energies of face-centered cubic concentrated solid solution alloys10.1016/j.actamat.2017.05.001 ↗
41. The influence of particles size and its distribution on the degree of stress concentration in particulate reinforced metal matrix composites10.1016/j.msea.2018.06.067 ↗
42. Phase field simulations of plastic strain-induced phase transformations under high pressure and large shear10.1103/PhysRevB.94.214104 ↗