The corrosion of FeCoNiAl-based medium- and high-entropy alloys in various ratios of CO2/CO gas mixture
Source abstract
Abstract
The corrosion behavior of equimolar FeCoNiAl medium-entropy and FeCoNiCrAl high-entropy alloys was studied at 950 °C in various ratios of CO 2 /CO gas mixture. The results showed that both alloys experienced pure oxidation, and their oxidation kinetics followed the parabolic-rate law, having the oxidation rate constants increased with increasing CO 2/CO ratio. The scales formed on FeCoNiAl were triple-layered, consisting of an outer CoFe 2O 4 layer, an intermediate CoAl 2O 4 layer, and an inner α-Al 2O 3 layer, while an exclusive α-Al 2O 3 layer formed on FeCoNiCrAl.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Behavior of selected commercial alloys during high temperature oxychloridation10.5006/1.3583974 ↗
2. The effect of temperature on the passive film properties and pitting behaviour of a Fe-Cr-Ni alloy10.1016/0010-938X(96)00176-X ↗
3. Microcrack generation and its healing in the oxide scale formed on Fe-Cr alloys10.1007/BF00603806 ↗
4. Microstructure and morphology of high temperature oxidation in superalloys10.1016/S0921-5093(98)01181-2 ↗
5. Oxidation Characteristics and Oxide Layer Evolution of Alloy 617 and Haynes 230 at 900 oC and 1100 oC10.1007/s11085-009-9142-5 ↗
6. The effect of oxide volatilization on the oxidation kinetics of Cr and Fe‐Cr alloys10.1149/1.2424115 ↗
7. Theoretical and experimental investigation of the thermochemistry of CrO2(OH)2(g)10.1021/jp0647380 ↗
8. Microstructure development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
9. Nanostructured high‐entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
10. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
11. Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures10.1016/j.actamat.2018.12.015 ↗
12. A critical review of high-entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
13. High-entropy alloys10.1038/s41578-019-0121-4 ↗
14. Ultrastrong medium-entropy single-phase alloys designed via severe lattice distortion10.1002/adma.201807142 ↗
15. Multicomponent high-entropy Cantor alloys10.1016/j.pmatsci.2020.100754 ↗
16. Clarifying the four core effects of high-entropy materials10.1038/s41570-024-00602-5 ↗
17. Air oxidation of FeCoNi-base equimolar alloys at 800-1000 °C10.1007/s11085-004-3198-z ↗
18. Air-oxidation of FeCoNiCr-based quinary high-entropy alloys at 700–900 °C10.1016/j.corsci.2017.02.008 ↗
19. The oxidation behavior of an equimolar FeCoNiCrMn high-entropy alloy at 950 °C in various oxygen-containing atmospheres10.1016/j.corsci.2016.03.020 ↗
20. The oxidation behavior of the quinary FeCoNiCrSix high-entropy alloys10.1016/j.matchemphys.2017.06.017 ↗
21. High-temperature oxidation behavior of Al-Co-Cr-Ni-(Fe or Si) multicomponent high-entropy alloys
22. Oxidation of CoCrFeMnNi high entropy alloys
23. High-temperature air-oxidation of NiCoCrAlx medium-entropy alloys10.1016/j.corsci.2021.109858 ↗
24. The corrosion of an equimolar FeCoNiCrMn high-entropy alloy in various CO2/CO mixed gases at 700 and 950 °C10.1016/j.corsci.2019.03.030 ↗
25. Achievement of reactor-outlet coolant temperature of 950◦C in HTTR10.1080/18811248.2004.9726354 ↗
26. The oxidation of an equimolar FeCoNiAl medium-entropy alloy at 900 ◦C in various oxygen pressures10.1016/j.corsci.2023.111560 ↗
27. Gaskell · 2008 · 582
28. Kofstad · 1988
29. The oxidation of iron at controlled oxygen partial pressures–II. Carbon monoxide-carbon dioxide10.1016/S0010-938X(73)80064-2 ↗
30. Electrical conductivity and thermogravimetric studies of single crystalline cobaltous oxide10.1016/0022-3697(68)90102-9 ↗
31. Barin · 1995
32. Young · 2016
33. Birks · 2006
34. Self-diffusion and defect structure in cobaltous oxide10.1007/BF00608019 ↗
35. Studies of the oxidation of nickel in the temperature range of 900 to 1400°C10.1149/1.2423553 ↗
36. Kofstad · 1983
37. Electrical properties of cobalt monoxide10.1063/1.1726906 ↗
38. Nonstoichiometries and defect structures in pure nickel oxide and lithium ferrite
39. Diffusion of cations in chromia layers grown on iron-base alloys10.1007/BF00665632 ↗
40. A comparison of the oxidation behavior of Fe-Cr-Al, Ni-Cr-Al, and Co-Cr-Al alloys10.1007/BF00603481 ↗
41. Microstructure, adhesion and growth kinetics of protective scales on metals and alloys10.1007/BF00656571 ↗
42. The oxidation behavior of a Ni2FeCoCrAl0.5 high-entropy superalloy in O2 containing environments10.1016/j.corsci.2019.108093 ↗