The effects of adding elements of the same group on the magnetic properties of FeP amorphous alloys
Source abstract
Abstract
Although relevant theories and models have been used in certain studies on the magnetic properties of amorphous alloys, the influence mechanism of metalloid elements on the magnetic properties of amorphous alloys is currently unclear. The effects of adding the same group of metalloid elements, C, Si, and Ge, on the magnetic properties of FeP amorphous alloys were systematically investigated by utilizing first-principle molecular dynamics. With the replacement of P atoms by C, Si, and Ge, the magnetic moments of the three types of amorphous alloys increase, and the results of the theoretical simulation are in line with the trend of the experimental results. The study revealed that when smaller-radius C atoms replace larger-radius P atoms, these C atoms tend to fill the gap positions of amorphous alloys so that the number of Fe atoms around the Fe atoms gradually increases, which induces an increase in the magnetic moment of the Fe atoms and ultimately leads to an increase in the magnetic moment of the C x (x = 5, 10 and 15) amorphous alloys. Nevertheless, when the P atoms are substituted by Si or Ge atoms, their atomic radii are comparable to those of the other atoms. The original positions where the P atoms are located are replaced by Si or Ge atoms, which increases the volume of the amorphous alloy, thereby increasing the distance between the Fe atoms and resulting in a gradual increase in the magnetic moment of the Si x and Ge x (x = 5, 10, and 15) amorphous alloys. Additionally, compared with C atoms, when Si or Ge with an atomic radius not much different from that of P is used for replacement, more regular icosahedral distributions appear, which enhances the symmetry of the local atomic structure. This may be one of the reasons why the magnetic moment of Si x or Ge x amorphous alloys is greater than that of C x amorphous alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties and Applications · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Calculation of the energy spectrum for strongly anisotropic crystals
2. Amorphous ferromagnetic phase in iron-carbon-phosphorus alloys10.1063/1.1709084 ↗
3. Fe-based bulk metallic glasses: glass formation, fabrication, properties and applications10.1016/j.pmatsci.2019.01.003 ↗
4. Structures and functional properties of amorphous alloys10.1002/sstr.202000057 ↗
5. Tailoring magnetic softness of Fe-based amorphous alloys with superior magnetization by magnetic field annealing10.1016/j.jmst.2024.02.043 ↗
6. Soft magnetostrictive materials: enhanced magnetostriction of Fe-based nanocrystal-line alloys via Ga doping10.1016/j.scriptamat.2023.115956 ↗
7. Deep learning-based prediction of saturation magnetic flux density in Fe-based metallic glasses via transfer learning10.1016/j.matchemphys.2024.129076 ↗
8. Development and industrialization of Zr- and Fe-based bulk metallic glasses and light metal-based metastable alloys10.1016/j.jallcom.2024.173546 ↗
9. Effect of Fe/Co ratio on the microstructure and properties of a typical FeCo-based amorphous alloys10.1016/j.jnoncrysol.2024.122858 ↗
10. Ductile Fe-based amorphous alloy with excellent soft magnetic properties induced by low-temperature stress annealing10.1016/j.intermet.2024.108201 ↗
11. Preparation of Fe-based bulk amorphous and nanocrystalline alloys by mould suction casting technique10.4028/www.scientific.net/SSP.163.233 ↗
12. Influence of the preparation cooling rate on crystallization kinetics of Fe74Mo6P13C7 amorphous alloys10.1016/j.jnoncrysol.2017.09.012 ↗
13. Recent progress in Fe-based amorphous and nanocrystalline soft magnetic materials10.1016/j.jmmm.2019.166373 ↗
14. Composition design for Fe-based soft magnetic amorphous and nanocrystalline alloys with high Fe content10.1016/j.matdes.2020.108511 ↗
15. The effect of Fe and metalloid contents on magnetic properties of Fe-Si-B-P amorphous alloys containing Fe in the range of 83-85 at
16. Theoretical prediction and experimental validation of the glass-forming ability and magnetic properties of Fe-Si-B metallic glasses from atomic structures10.3390/ma15093149 ↗
17. Fe(Co)SiBPCCu nanocrystalline alloys with high Bs above 1.83 T10.1016/j.jmmm.2017.05.072 ↗
18. Extremely high Bs (Fe1-xCox)86Ni1B13 amorphous soft magnetic alloys with good bending ductility10.1016/j.intermet.2020.106959 ↗
19. Influence of Co substitution for Fe on magnetic properties and crystal structure of soft magnetic Fe81.3Mo0.2Cu0.5Si4B14 alloy10.1016/j.jmmm.2020.166681 ↗
20. Effect of metalloid elements on magnetic properties of Fe-based bulk metallic glasses10.1016/j.intermet.2016.12.010 ↗
21. Tailoring soft magnetic properties of Fe-based amorphous alloys through C Addition10.1016/j.pnsc.2020.02.001 ↗
22. The atomic structure, magnetic properties and bending ductility of a novel Fe-P-C-B-Si amorphous alloy investigated by experiments and ab initio molecular dynamics10.1016/j.jallcom.2022.164101 ↗
23. Effects of B/P and Co/Fe substitutions on glass-forming ability and soft magnetic properties of a Fe80P13C7 metallic glass10.1016/j.jnoncrysol.2023.122480 ↗
24. AIMD study and experimental verification of Ge-doped Fe80P13C7 amorphous soft magnetic alloys10.1016/j.jnoncrysol.2023.122724 ↗
25. The magnetic moments of amorphous metal-metalloid alloys10.1143/JPSJ.39.541 ↗
26. Ferromagnetic properties of some new metallic glasses10.1063/1.89085 ↗
27. Chemical bonding, magnetic moments, and local symmetry in transition-metal-metalloid alloys10.1103/PhysRevB.27.636 ↗
28. Local electronic structure of amorphous metal alloys using cluster models. Evidence for specific metalloid-metal interactions10.1103/PhysRevB.23.1616 ↗
29. Generalized Slater-Pauling curve for transition-metal magnets10.1109/TMAG.1983.1062706 ↗
30. Metallic alloys10.1007/BF02751483 ↗
31. Structural dependence of the magnetic moment in microcrystalline andamorphous Fe-P alloys10.1016/0304-8853(89)90008-5 ↗
32. First principle study on the Si effect in the Fe-based soft magnetic nano-crystalline alloys10.1016/j.jallcom.2017.09.311 ↗
33. The Prediction of optimized metalloid content in Fe-Si-B-P amorphous alloys using artificial intelligence algorithm10.24425/amm.2022.141090 ↗
34. The influence of the cluster connection modes on the soft magnetic properties in the Fe78Si9B13 amorphous ribbon10.1016/j.jnoncrysol.2023.122705 ↗
35. Atomic level simulation of amorphous/nanocrystalline transition behavior in the Fe based amorphous alloys10.1016/j.jnoncrysol.2023.122726 ↗
36. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
37. Correlation hole of the spin-polarized electron gas, with exact small-wave-vector and high-density scaling10.1103/PhysRevB.44.13298 ↗
38. A unified formulation of the constant temperature molecular dynamics methods10.1063/1.447334 ↗
39. A grid-based Bader analysis algorithm without lattice bias10.1088/0953-8984/21/8/084204 ↗
40. Effects of metalloids on the magnetic properties of iron-and cobalt-based amorphous alloys10.1016/0304-8853(80)90310-8 ↗
41. The algorithm for three-dimensional voronoi polyhedral10.1016/0021-9991(86)90123-3 ↗
42. Atomic packing and medium-range order in Ni3Al metallic glass10.1016/j.jnoncrysol.2017.04.026 ↗
43. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
44. Cullity · 2011 · 132
45. Symmetry and cluster magnetism10.1103/PhysRevA.41.5691 ↗
46. Structure and magnetic properties of Fe12X clusters10.1016/j.chemphys.2013.12.014 ↗