Statistical analysis of lamellar and Widmannstätten structures obtained in Nb-rich γ-TiAl alloy with varied cooling rate and annealing duration
Source abstract
Abstract
Nb-rich γ-TiAl alloys are of interest for enhanced mechanical properties and oxidation resistance. The influence of cooling rate and annealing duration on microstructural evolution of Nb-rich γ-TiAl alloy (Ti-45Al-8Nb-0.2B) has been meticulously investigated, with emphasis on phase volume fraction, grain size, and lamellar spacing. The alloy was annealed at 1320 °C for 15 min, and then furnace-cooled, oil-quenched or cryogenic quenched, whereas annealing for 2 h and 26 h was followed by water quenching. The post-anneal microstructures were characterized using X-ray diffraction, optical and scanning electron microscopy, along with energy dispersive spectroscopy and electron backscattered diffraction. Across all samples, a fully lamellar microstructure comprising α 2 and γ phases has been consistently achieved, along with sporadically observed small β precipitates, and elongated ribbon-like TiB 2. Widmannstätten colonies (WC) have been observed with diverse morphologies, most of which exhibited an angle of around 64° to regular lamellae, supporting the theory of { 1 ‾ 1 ‾ 22 } twinning in the α-phase for WC formation. The γ phase fraction has decreased with increasing cooling rate and annealing time. Grain size and lamellar spacing have also declined with cooling rate but increased with annealing time. Additionally, the mean size of equiaxed γ grains has enlarged with annealing duration.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Structural intermetallics
2. Characterization of creep behavior of TiAl alloy with high Nb content at elevated temperatures10.1007/s12598-015-0643-x ↗
3. Light-weight intermetallic titanium aluminides - status of research and development10.4028/www.scientific.net/AMR.278.551 ↗
4. Compressive creep behavior of a γ-TiAl based Ti–45Al–8Nb–2Cr-0.2B alloy: the role of β(B2)-phase and concurrent phase transformations10.1016/j.msea.2019.138891 ↗
5. Effect of composition on grain refinement in TiAl-based alloys10.1016/S0966-9795(01)00079-6 ↗
6. Effects of Nb and Al on the microstructures and mechanical properties of high Nb containing TiAl base alloys10.1016/S0966-9795(02)00037-7 ↗
7. Physical metallurgy of high Nb-containing TiAl alloys10.1515/ijmr-2004-0113 ↗
8. On the origin of superior high strength of Ti-45Al-10Nb alloys10.1016/S0966-9795(02)00008-0 ↗
9. Some aspects of phase transformations in titanium alloys
10. Phase transformation mechanisms involved in two-phase TiAl-based alloys - I. Lamellar structure formation10.1016/1359-6454(95)00167-4 ↗
11. Phase transformation mechanisms involved in two-phase TiAl-based alloys - II. Discontinuous coarsening and massive-type transformation10.1016/1359-6454(95)00168-6 ↗
12. Lamellar transformation in near-γ TiAl alloys-Quantitative analysis of kinetics and microstructure10.1016/j.msea.2008.02.009 ↗
13. Microstructure design and its effect on mechanical properties in gamma titanium aluminides10.3390/met11101644 ↗
14. Tailoring microstructure and mechanical performance of a β-solidifying TiAl alloy via martensitic transformation
15. Mechanism of grain refinement in TiAl alloys by boron addition - an alternative hypothesis10.1016/S0966-9795(99)00063-1 ↗
16. Grain refinement of 1 at.% Ta-containing cast TiAl-based alloy by cyclic air-cooling heat treatment10.1016/j.matlet.2020.127940 ↗
17. Influence of cooling rate on microstructure and mechanical properties of a Ti-48Al alloy10.1016/S0966-9795(99)00016-3 ↗
18. The α-γ transformation during continuous cooling in Ti-48 at% Al alloys10.1557/PROC-288-223 ↗
19. Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-TiAl based alloy10.1016/j.intermet.2013.09.010 ↗
20. Microstructural evolution during heat treatments in Ti-45 and 47Al-2Nb-2Mn+0.8vol.%TiB 2 XD TM alloys10.1016/S0921-5093(01)01546-5 ↗
21. Microstructure and mechanical properties of a forged β-solidifying γ TiAl alloy in different heat treatment conditions10.1016/j.intermet.2014.11.008 ↗
22. Influence of quenching rates on the transformation of ternary phases in Nb-rich γ-TiAl alloys10.1557/opl.2011.30 ↗
23. Standard test methods for determining average grain size using semiautomatic and automatic image analysis
24. Advances in gammalloy materials–processes–application technology: successes, dilemmas, and future10.1007/s11837-018-2747-x ↗
25. The effect of thermal exposure on microstructural stability and creep resistance of a two-Phase TiAl/Ti3Al lamellar alloy10.1007/BF02648857 ↗
26. Effects of lamellar spacing, volume fraction and grain size on creep strength of fully lamellar TiAl alloys10.1016/S0921-5093(97)00612-6 ↗
27. The effect of lamellar lath spacing on the creep behavior of Ti-47at%Al10.1016/S1359-6462(98)00014-1 ↗
28. Creep properties of near γ-TiAl+W with a lamellar microstructure10.1016/0956-716X(94)90123-6 ↗
29. Deformation Behavior of Alloys with a Modulated Microstructure
30. The creep behavior of a fully lamellar γ-TiAl based alloy
31. Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures10.1016/j.actamat.2017.02.050 ↗
32. Creep of γ-TiAl based alloys-experiments and computational modeling
33. The structure of ribbon borides in a Ti-44Al-4Nb-4Zr-1B alloy10.1016/j.intermet.2005.11.013 ↗
34. Microstructure formation in cast β-solidifying γ-titanium aluminide alloys10.4028/www.scientific.net/MSF.638-642.1394 ↗
35. The nature of complex precipitates associated with the addition of boron to a γ-based titanium aluminide10.1016/0966-9795(95)00017-S ↗
36. Boride morphology in a (Fe, V, B) Ti-A1 alloy containing B2-phase10.1016/0956-7151(94)00345-I ↗
37. Alloy design concepts for refined gamma titanium aluminide based alloys10.1016/j.intermet.2006.05.003 ↗
38. Grain refinement by low boron additions in niobium-rich TiAl-based alloys10.1016/j.intermet.2008.04.019 ↗
39. Investment-cast processing of XDTM near-γ titanium aluminides10.1016/0921-5093(91)90208-5 ↗
40. Grain refinement by low boron additions in niobium-rich TiAl-based alloys10.1016/j.intermet.2008.04.019 ↗
41. Development of Widmanstätten laths in a near-γ TiAl alloy10.1016/j.actamat.2005.04.007 ↗
42. Appel · 2011 · 61
43. Characterization of Widmanstatten laths and interlocking boundaries in fully-lamellar TiAI-base alloy10.1016/S1359-6462(97)00166-8 ↗
44. TEM characterisation of Widmanstätten microstructures in TiAl-based alloys10.1016/j.intermet.2004.08.007 ↗
45. Characterization of the Widmanstätten structure in γ-TiAl alloy using an EBSD-FIB-TEM combined process
46. Features of feathery γ structure in a near-γ TiAl alloy10.1016/j.actamat.2007.12.056 ↗
47. Phase transformations in some TiAl-based alloys10.1016/S0966-9795(02)00047-X ↗
48. Phase transformations in two-phase TiAl Ti3Al alloys during continuous heating and cooling, studied by electrical resistivity measurements10.1016/0921-5093(94)03326-9 ↗
49. Ductile TiAl alloy with a Widmanstätten lamellar structure formed by rapid heating10.1557/jmr.2008.0138 ↗
50. Deformation behavior of a β-solidifying TiAl alloy within β phase field and its effect on the β→α transformation10.3390/met8080605 ↗
51. Metastable transformation behavior in a Ta-containing TiAl-Nb alloy during continuous cooling10.1016/j.jallcom.2022.164088 ↗