SiC incorporation effects on AlFeCrNiTi high entropy alloy morphology, mechanical and corrosion properties
Source abstract
Abstract
Using pulse electrodeposition method on copper substrates, AlFeCrNiTi high entropy alloy (HEA) coatings were successfully applied with various concentrations of silicon carbide (0, 10, 15 and 20 g/L) in the coating bath as reinforcement. Various techniques were used to investigate the created structure and its properties, including morphology, chemical composition, phase analysis, microhardness, corrosion, and wear. In the presence of silicon carbide particles, the coatings had a spherical morphology. The formation of HEA was confirmed by EDS, XRD, and thermodynamic calculations, which showed that the solid solution formed without silicon carbide and with silicon carbide was FCC + BCC and BCC respectively. Furthermore, the results of mechanical and corrosion properties showed that the fineness of the grains improved microhardness and wear resistance, and due to the formation of a continuous passive layer caused by silicon carbide powder, the corrosion current density in 3.5 wt% NaCl solution decreased to 0.79 A/cm 2 and the charge transfer resistance increased to 6810 Ω cm 2. Also, the sample with a concentration of 20 g/L of silicon carbide in the coating bath has better mechanical and corrosion properties than other samples.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Campbell · 2008
2. Nanostructured high‐entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Gao · 2016
4. Recent progress in high entropy alloys10.3166/acsm.31.633-648 ↗
5. Sluggish diffusion in co–cr–fe–mn–ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
6. Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements10.1007/s11661-006-0234-4 ↗
7. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
8. The effect of pulse current density on the microstructure, magnetic, mechanical, and corrosion properties of high-entropy alloy coating Fe–Co–Ni–Mo–W, achieved through electro co-deposition10.1016/j.intermet.2022.107610 ↗
9. Review of electrodeposition methods for the preparation of high-entropy alloys10.1007/s12613-022-2439-y ↗
10. A high entropy alloy of AlCrFeNiTiZn synthesized through mechanical alloying and sintering10.1016/j.intermet.2023.107981 ↗
11. Elemental segregation in an AlCoCrFeNi high-entropy alloy–A comparison between selective laser melting and induction melting10.1016/j.jallcom.2018.12.267 ↗
12. Synthesis and characterization of nano-polycrystal diamonds on refractory high entropy alloys by chemical vapour deposition10.1016/j.apsusc.2023.157108 ↗
13. Facile synthesis of nanocrystalline high-entropy diboride powders by a simple sol-gel method and their performance in supercapacitor10.1016/j.ceramint.2023.02.170 ↗
14. Electrochemical deposition and microstructural characterization of AlCrFeMnNi and AlCrCuFeMnNi high entropy alloy thin films10.1016/j.apsusc.2015.07.142 ↗
15. Pulse electrodeposition and corrosion properties of nanocrystalline nickel-chromium alloy coatings on copper substrate10.1016/j.jallcom.2020.153712 ↗
16. Study of the effect of current density on the metallurgical properties of AlFeCrNiTi high entropy alloy coating produced by pulse plating
17. Electrodeposited FeCoNiWMo high entropy alloy/SiC nanocomposite coatings: microstructure, mechanical properties and corrosion resistance10.1016/j.intermet.2023.107988 ↗
18. Pulse electrodeposited FeCoNiMnW high entropy alloys as efficient and stable bifunctional electrocatalysts for acidic water splitting10.1016/j.cej.2022.137452 ↗
19. Synthesis of CoCrFeMnNi high entropy alloy thin films by pulse electrodeposition: Part 1: effect of pulse electrodeposition parameters10.1007/s12540-019-00404-1 ↗
20. Microstructure-corrosion property correlation in electrodeposited AlCrFeCoNiCu high entropy alloys-graphene oxide composite coatings10.1016/j.tsf.2019.137434 ↗
21. Pulsed electrodeposition of Ni-W coatings predicts microhardness via gene expression programming10.1007/s10800-023-01844-9 ↗
22. Ni–W/ZrO2 nanocomposites obtained by ultrasonic DC electrodeposition10.1016/j.matdes.2015.04.049 ↗
23. Fracture and wear mechanisms of FeMnCrNiCo+ x (TiC) composite high-entropy alloy cladding layers10.1016/j.apsusc.2020.148794 ↗
24. Microstructure and corrosion performance of AlFeCoNiCu high entropy alloy coatings by addition of graphene oxide
25. Phase constitution, surface chemistry and corrosion behavior of electrodeposited MnFeCoNiCu high entropy alloy-graphene oxide composite coatings10.1016/j.surfcoat.2021.127943 ↗
26. Microstructure-electrochemical property correlation in electrodeposited CuFeNiCoCr high-entropy alloy-graphene oxide composite coatings10.1080/14786435.2018.1554915 ↗
27. Graphene oxide reinforced magnetic FeCoNiCuZn high entropy alloy through electrodeposition10.1149/1945-7111/ac4e56 ↗
28. Phase composition, surface chemistry and electrochemical studies of electrodeposited AlMnFeCuNi high entropy alloy composite coatings incorporated with carbon nanotubes10.1088/2053-1591/ad2a88 ↗
29. Corrosion resistance and tribological behavior of FeCoCrNi@ GO/Ni high entropy alloy-based composite coatings prepared by electrodeposition10.1016/j.surfcoat.2024.130379 ↗
30. Effect of additive and current density on microstructures and corrosion behavior of a multi-component NiFeCoCu alloy prepared by electrodeposition10.3390/cryst14020171 ↗
31. Effect of SiC nano-particles on microstructure and mechanical properties of the CoCrFeMnNi high entropy alloy10.1016/j.jallcom.2017.02.274 ↗
32. The effect of SiC nanoparticles addition on the electrochemical response of mechanically alloyed CoCrFeMnNi high entropy alloy10.1016/j.matchemphys.2018.05.056 ↗
33. Effect of the amount of SiC particles on the microstructure, mechanical and wear properties of FeMnCoCr high entropy alloy composites10.1016/j.matchar.2022.112300 ↗
34. Effect of Si and C additions on the reaction mechanism and mechanical properties of FeCrNiCu high entropy alloy
35. Microstructure and mechanical properties of in situ (TiC+ SiC)/FeCrCoNi high entropy alloy matrix composites10.1007/s42243-020-00472-3 ↗
36. Effect of SiC on microstructure, phase evolution, and mechanical properties of spark-plasma-sintered high-entropy ceramic composite10.3390/ceramics3030032 ↗
37. Thermodynamics of corrosion: pourbaix diagrams
38. Microstructure and electrochemical properties of FeNiCoCu medium entropy alloy-graphene oxide composite coatings10.1016/j.jallcom.2021.158851 ↗
39. Wandelt · 2018
40. Metallic composite coatings by electroless technique–a critical review10.1080/09506608.2018.1506692 ↗
41. A review of electrodeposited Ni-Co alloy and composite coatings: microstructure, properties and applications10.1016/j.surfcoat.2019.04.079 ↗
42. Microstructural, phase evolution and corrosion properties of silicon carbide reinforced pulse electrodeposited nickel–tungsten composite coatings10.1016/j.apsusc.2015.12.179 ↗
43. Effect of electrodeposition conditions and reinforcement content on microstructure and tribological properties of nickel composite coatings10.1016/j.surfcoat.2011.02.057 ↗
44. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
45. Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys10.2320/matertrans1989.41.1372 ↗
46. Revisit the VEC rule in high entropy alloys (HEAs) with high-throughput CALPHAD approach and its applications for material design-A case study with Al–Co–Cr–Fe–Ni system10.1016/j.actamat.2020.03.039 ↗
47. Microstructure and magnetic characteristics of AlCrCuFeNiTi high-entropy alloy prepared by mechanical alloying followed by spark plasma sintering
48. Gaskell · 2017
49. Nondestructive testing (NDT) techniques in the measurement of residual stresses in composite materials: an overview
50. Strategies to engineer FeCoNiCuZn high entropy alloy composition through aqueous electrochemical deposition10.1016/j.electacta.2023.142350 ↗
51. Electrodeposited NiCoFe films from electrolytes with different Fe ion concentrations10.1016/j.jmmm.2014.01.078 ↗
52. The Scherrer equation and the dynamical theory of X-ray diffraction10.1107/S205327331600365X ↗
53. Electrodeposited Ni-B/SiC micro-and nano-composite coatings: a comparative study10.1016/j.jallcom.2018.12.184 ↗
54. Microhardness measurements and the Hall-Petch relationship in an Al Mg alloy with submicrometer grain size10.1016/1359-6454(96)00105-X ↗
55. Nickel–carbon nanocomposites: synthesis, structural changes and strengthening mechanisms10.1016/j.actamat.2011.10.012 ↗
56. Strengthening mechanisms and wear behavior of electrodeposited Ni–SiC nanocomposite coatings10.1007/s10853-022-07655-1 ↗
57. Friction and wear properties of the co-deposited Ni–SiC nanocomposite coating10.1016/j.apsusc.2007.04.047 ↗
58. Characterization of Ni-Cu matrix, Al2O3 reinforced nano-composite coatings prepared by electrodeposition10.1016/j.apsusc.2018.06.095 ↗
59. Tait · 1994
60. Electrochemical impedance spectroscopy10.1146/annurev.anchem.012809.102211 ↗
61. Study of zirconium-based conversion coating on aluminum counter electrodes of dye-sensitized solar cells for anti-corrosion resistance and morphology10.1007/s11664-023-10678-2 ↗
62. Electrochemical impedance spectroscopy and its applications10.1007/0-306-46916-2_2 ↗
63. A comprehensive review on advances in high entropy alloys: fabrication and surface modification methods, properties, applications, and future prospects10.1016/j.jmapro.2023.12.039 ↗
64. A review on high entropy alloys coatings: fabrication processes and property assessment10.1002/adem.201900343 ↗
65. High-entropy alloy nanoparticles as a promising electrocatalyst to enhance activity and durability for oxygen reduction10.1007/s12274-022-4432-1 ↗
66. Multiple metal–nitrogen bonds synergistically boosting the activity and durability of high-entropy alloy electrocatalysts10.1021/jacs.3c08177 ↗
67. Electrochemical preparation and magnetic study of Bi–Fe–Co–Ni–Mn high entropy alloy10.1016/j.electacta.2008.06.036 ↗
68. Controllable electrochemical synthesis and magnetic behaviors of Mg–Mn–Fe–Co–Ni–Gd alloy films10.1016/j.jallcom.2014.02.051 ↗
69. Characterization of Co–Cr–Fe–Mn–Ni high-entropy alloy thin films synthesized by pulse electrodeposition: part 2: effect of pulse electrodeposition parameters on the wettability and corrosion resistance10.1007/s12540-019-00584-w ↗
70. Facile preparation and magnetic study of amorphous Tm-Fe-Co-Ni-Mn multicomponent alloy nanofilm10.1016/S1002-0721(10)60418-8 ↗
71. Examination of microstructure and corrosion properties of novel AlCoCrFeNi multicomponent alloy
72. Preparation of high entropy alloy thin film fenicobimn by electroplating deposition method
73. Effect of particle concentration on the structure and tribological properties of submicron particle SiC reinforced Ni metal matrix composite (MMC) coatings produced by electrodeposition10.1016/j.apsusc.2011.12.069 ↗