journal article·2003-04

Microstructure and high temperature mechanical properties of mechanically alloyed Nb3Al-based materials

A. Dollár, S. Dymek

Intermetallics· Volume 11· Issue 4
Publisher page

Abstract

Abstract The microstructure and high temperature mechanical properties of mechanically alloyed Nb 3 Al-based materials have been investigated. The results for four binary Nb–Al and three ternary Nb–Al–V materials are presented. The microstructure of the present alloys consists of four phases: a disordered Nb solid solution, the Nb 3 Al and Nb 2 Al ordered phases and aluminum oxide dispersoids. All alloys exhibit high strength at 800 °C, but only ternary alloys retain the strength up to at least 1100 °C. The presence of vanadium, with its atomic diameter significantly smaller than those of Nb and Al, is postulated to lead to the solid solution strengthening. In the ternary alloy Nb–15 at.% Al–20 at.% V consolidated at 1500 °C the creep rates are significantly lower (one to two orders of magnitude) than in all other alloys investigated in the present study because of the absence of the Nb 2 Al phase in its microstructure. Creep rate dependence on temperature in the present alloys is controlled by the diffusivity of Nb and Al atoms (and V atoms in the ternary alloys) in the ordered Nb 3 Al phase and the creep mechanism is diffusion-assisted dislocation creep.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Anton · Mater Sci Eng. · 1992 · A153 · 402
2. Anton · Mater Res Soc Symp · 1991 · 213 · 73310.1557/PROC-213-733 ↗
3. Rong · Intermetallics · 2002 · 10 · 110.1016/S0966-9795(01)00076-0 ↗
4. Nomura N, Yoshimi K, Hanada S. In: Nathal MV et al., editors. Structural intermetallics. Warrandale (USA): TMS; 1997. p. 923.
5. Tappin · Acta Mater. · 1997 · 45 · 492310.1016/S1359-6454(97)00195-X ↗
6. Dymek · Mater Sci Eng. · 1997 · A239-A240 · 50710.1016/S0921-5093(97)00624-2 ↗
7. Shyue · Mater Res Soc Symp · 1993 · 288 · 24310.1557/PROC-288-243 ↗
8. Raman · Zeit Metall · 1966 · 57 · 535
9. Dymek · Mater Char · 2001 · 47 · 37510.1016/S1044-5803(02)00184-5 ↗
10. Miracle · Acta Metall Mater. · 1993 · 41 · 64910.1016/0956-7151(93)90001-9 ↗
11. Kontsevoi OY, Gornostyrev YN, Freeman AJ. In: Hemker KJ et al., editors. Structural intermetallics. Warrandale (USA): TMS; 2001. p. 431.
12. Suyama R, Kimura M, Hashimoto K. In: Darolia R et al., editors. Structural intermetallics. Warrandale (USA): TMS; 1993. p. 681.
13. Cahn · Mat Sci Eng. · 2002 · A324 · 110.1016/S0921-5093(01)01273-4 ↗
14. Barth · Mater Sci Eng. · 1992 · A153 · 39810.1016/0921-5093(92)90227-R ↗
15. Khantha · Mater Res Soc Symp Proc · 1989 · 133 · 9910.1557/PROC-133-99 ↗
16. Anton · Mater Res Soc Symp Proc · 1989 · 133 · 36110.1557/PROC-133-361 ↗
17. Meyers · 1999
18. Nabarro · 1995
19. Suh · Mater Sci Eng. · 1995 · A192/A193 · 69110.1016/0921-5093(94)03289-0 ↗
20. Sellars · Mater Sci Eng. · 1980 · 46 · 7510.1016/0025-5416(80)90192-5 ↗
21. Gibeling · Mater Sci Eng. · 1980 · 45 · 12310.1016/0025-5416(80)90218-9 ↗
22. Dunand DC, Derby B. In: Suresh S et al., editor. Fundamentals of metal-matrix composites. Butterworth-Heinemann; 1993. p. 191.10.1016/B978-0-08-052371-2.50015-8 ↗